• Aucun résultat trouvé

[BOOT] Démarrage d'un PC

N/A
N/A
Protected

Academic year: 2022

Partager "[BOOT] Démarrage d'un PC"

Copied!
2
0
0

Texte intégral

(1)

[BOOT] Démarrage d'un PC

Extrait du Libre comme la Banquise

http://eric.berthomier.free.fr/spip.php?article98

[BOOT] Démarrage d'un PC

- Notes Techniques - Dépannage PC -

Date de mise en ligne : dimanche 19 janvier 2014

Copyright © Libre comme la Banquise - Tous droits réservés

Copyright © Libre comme la Banquise Page 1/2

(2)

[BOOT] Démarrage d'un PC

Vous trouverez dans cet article, deux documents relatifs au démarrage du système Windows XP. Bien que ce système soit maintenant obsolète (à partir d'Avril 2013), les grands principes restent les mêmes.

Démarrage d'un ordinateur de type PC avec Windows XP

Ce premier document est la traduction d'un document en anglais "The PC Boot Process - Windows XP" - Source.

La séquence de boot d'un PC sous XP

Ce document provient du site Internet https://moodle2.diderot.org du Lycée Diderot à Paris.

<a href="IMG/pdf/la_sequence_de_boot.pdf" title='PDF - 87.5 ko' type="application/pdf">

La séquence de boot d'un PC sous XP Description du démarrage d'un PC sous WIndows XP. MBR, clés de registres.

Autres ressources

JM Sklar : The PC Boot Process

Geek Code : « I don't reinvent the wheel, I just link to it » « Je n'ai pas réinventé la roue, j'en ai juste fait un lien ».

Copyright © Libre comme la Banquise Page 2/2

Références

Documents relatifs

flCPPY. Power-cycling mode ~ust be terminated by inputting the APPUEIENTER key sequence, and will result in entry to ROM Customer monitor mode with the following

NTLDR lit ensuite le contenu du fichier Boot.ini puis et affiche les options de démarrage, s'ils en existent plusieurs ou bien démarre le système d'exploitation par défaut.. Si

Si le fichier BOOT.INI n’est pas trouvé à la racine du système de fichiers, NTLDR contin- uera la séquence de démarrage et essaiera de charger XP à partir de la première partition

ALTO MESA BOOT LOADER - MBoot.asm LOADED ALMOST ANYWHERE AND EXECUTED R... READ header and

This will cause all host file systems to sync as best they can, and core dumps to be taken from all nodes and the host.. If you wish to avoid taking core dumps, simply

Type Z, When the program ask for data, Type Starting Test Index into first Byte and Ending Test Index into second Byte, followed by a CR or SP. (See CP

failure can be accomplished with diagnostics and the installers (floppy or net). • Most important thing to remember is that you should not attempt data recovery until you are

issued in strict confidence and shall not, without the prior written permissiOn of Xerox Corpora- tion Rank Xerox,Ltd., be reproduced, copied or used for any purpose