• Aucun résultat trouvé

Buckling under imposed displacement of hybrid composite pipes

N/A
N/A
Protected

Academic year: 2021

Partager "Buckling under imposed displacement of hybrid composite pipes"

Copied!
1
0
0

Texte intégral

(1)

International Symposium on Aircraft Materials ACMA.Marrakech-Morocco.

2014

Buckling under imposed displacement of hybrid composite pipes

Leila Belgacem, Djamel Ouinas, Halima Chenine

Abstract : The thin composite structures that are widely used due to their high mechanical characteristics become unstable when loaded with heat or mechanical loads leading to buckling which has become a major problem. Our study focuses on the study of the buckling behavior of laminated composite pipes, carbon fiber / epoxy matrix reinforced with layers of aluminum, hybrid composite materials that call. To this end, we considered a structure composed of two layers of aluminum alloy 2024 T6 and 12 ply composite T700 whose stratification is ordered as follows [A / (? /-?) C6 / A]. An analysis of buckling induced by imposed displacement was carried out, using the finite element method. The results show that buckling load factor decreases with increase of the fibers inclination angle and it increases with increasing thickness of the fold, but from 2mm, this latter become almost stable.

Keywords : Buckling; hybrid composite, Pipe, notch, finite element analysis.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

It should be kept in mind, however, that the relationship under discussion is not purely spatial insofar as it serves above all to express the fact that the head N‘s referent has a

Dans un premier temps, l'étude des conditions de stabilité des éléments alliés a permis de montrer que le phénomène de sublimation partielle de l'alliage, nécessairement néfaste

des banques coopératives les plus souvent cités sont : leur réelle connaissance approfondie de l’économie sociale et de ses structures (et donc, leurs compétences souvent

The thin composite structures that are widely used due to their high mechanical characteristics become unstable when loaded with heat or mechanical loads leading

The objective of the current study was to gain a better understanding of mechanical and dynamic mechanical properties of hybrid composite laminate reinforced with glass woven

In this work we focus on a specific set of pred- icates in LOD datasets that indicate entity type information. For a target entity, we collect all indi- dated types. In detail, we

6th International Conference on Green Energy and Environmental Engineering GEEE-2019 As mentioned previously the amount of AE energy recorded during the failure is expected to

Les valeurs des richesses totales des espèces de fourmis capturées dans les sites d’étude varient entre 6 espèces pour les sites : palmeraie à plantation