• Aucun résultat trouvé

Brillouin optical time-domain analysis of fiber-optic parametric amplifiers

N/A
N/A
Protected

Academic year: 2021

Partager "Brillouin optical time-domain analysis of fiber-optic parametric amplifiers"

Copied!
4
0
0

Texte intégral

(1)

HAL Id: hal-00269890

https://hal.archives-ouvertes.fr/hal-00269890

Submitted on 29 Aug 2013

HAL is a multi-disciplinary open access archive for the deposit and dissemination of sci-entific research documents, whether they are pub-lished or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers.

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.

Brillouin optical time-domain analysis of fiber-optic

parametric amplifiers

Armand Vedadi, Dario Alasia, Eric Lantz, Hervé Maillotte, Luc Thévenaz,

Miguel Gonzalez-Herraez, Thibaut Sylvestre

To cite this version:

(2)
(3)
(4)

Références

Documents relatifs

A numerical model, based on the sensor physic, is first proposed in order to study Brillouin spectra distortion depending on strain distribution within spatial

The source dictionary S is constructed with the same elementary Brillouin spectrum Se(v) used to construct the Brillouin spectrum matrix. With this dictionary,

Certes, ils étaient là pour travailler le bois, que ce fût la mise en place d’une toiture provisoire, la construction des engins de levage, mais aussi leur entretien,

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Le procédé de polymérisation en émulsion, rationnalisé théoriquement dans les années 1948 par Smith et Ewart, est le procédé le plus largement utilisé industriellement pour

Figure 4: (a) Initial autocorrelation signal (blue solid line) is compared with autocorrelation for a counter-propagating configuration (dashed grey line) and for

Le plan adopté dans ce chapitre est le suivant : nous montrerons d’abord que lorsque le faisceau pompant (polarisé circulairement), le champ statique et le champ