• Aucun résultat trouvé

Coordinate system dependence of muscle forces predicted using optimization methods in musculoskeletal joints

N/A
N/A
Protected

Academic year: 2021

Partager "Coordinate system dependence of muscle forces predicted using optimization methods in musculoskeletal joints"

Copied!
147
0
0

Texte intégral

Loading

Figure

Figure  1-1.  Timeline  illustrating some  of the  major researcher papers published  on joint optimization methods  in  the past three decades.
Figure  2-2. Illustration  of pronated, neutral, and supinated  forearm positions  for a right  forearm.
Figure 4-4 (a)  The Microscribe  3DX  digitizer,  made by Immersion  Corporation (San  Jose,  CA),  was  used  to trace  the muscle insertions,  origins,  and lines  of action,  and bony  geometry  of the  specimen
Figure 5-1.  Free-body  diagram  of forearm  system, including  muscle forces,  external  loads, and joint  reaction force  and moment.
+7

Références

Documents relatifs

With this in mind, we propose a new manipulation plan- ning method that aims to increase the feasible space for on-line reactive control based on the idea of constrained

Generally speaking, with air and water loading, the predicted radiation efficiency, mean square velocity, and radiated sound power of porous plates are less than the predicted

The output powers for INC algorithm under variable solar irradiance Kalman filter based

Genotypic allocation among purebreeding, crossing and culling in mate selection and index selection with an over-dominant QTL (IAF = 0.5 and RRD = 5): (a) animals for purebreeding

For the five kinematics methods, joint torques, muscle forces and glenohumeral joint reaction forces were computed with the Delft Shoulder and Elbow musculoskeletal

Our method is an inverse dynamics method, using motion data (issued from motion capture) in order to estimate muscle forces.. The first step is an inverse kinematics

He mentions current texts and journals which he endorses and gives a final push for be­ havior modification, emphasizing that this technique can operationally be