Contribution to the MHD modeling in low speed radial flux AC machines with air-gaps filled with conductive fluids

In particular, different flows of a Carreau fluid around spheroidal particles with different orientations are simulated and numerical homogenization is used to obtain the

[r]

Pour réduire la quantité de cuivre et ainsi limiter les pertes par effet Joule, le bobinage concentré sur dents a été utilisé avec une structure à double rotor et simple

Our aim is to compare the flow features, in particular the velocity profiles, velocity boundary layer thickness and the turbulent fluctuations, above and below Nuc, and compare

In the second part of this paper, the low current arc discharge behavior is presented, analyzed and discussed in terms of temperature, velocity, electrical potential, Joule heating

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

Measurements, performed in an impedance tube, are compared with finite element predictions (Biot-Allard model). The influence of the incident angle on the absorption

Experimental analysis of arcs behavior in a 3-Phase AC arc plasma torch with hot graphite electrodes: comparison with MHD modeling results.. Christophe Rehmet 1 , Frederic Fabry 1