• Aucun résultat trouvé

Surface Modification of Powder Metallurgy Titanium by Colloidal Techniques and Diffusion Processes for Biomedical Applications

N/A
N/A
Protected

Academic year: 2021

Partager "Surface Modification of Powder Metallurgy Titanium by Colloidal Techniques and Diffusion Processes for Biomedical Applications"

Copied!
9
0
0

Texte intégral

Loading

Figure

Table 1. Substrate materials characteristics.
Fig. 1. Schematic of the four modified titanium samples designed and the nomenclature used for each sample.
Figure 5 shows the X-ray diffraction for the titanium nitride-coated sample (Figure 5a); and the Mo–TiN multilayer and molybdenized samples (Figure 5b)
Figure 6b presents the surface modification carried out on
+3

Références

Documents relatifs

Abstract : The diagrams of X for the natural and modified diatomite show remarkable modification onthe surface of this material, we were tested the modified diatomite for filtration

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des

In other words, if one considers, as in RMZL12, that the source of tidal dissipation is restricted to the core, it seems obvious that one has to relate the tidal dissipation in the

Abstract.- Permeability measurements versus temperature on niobium oxidized at 330 and 200°C showed the existence of a diffusion zone with relatively large 0-concen- tration at

Nous avons 6tudi6 en fonction de la temperature la variation du frottement interieur d'un composite constitud par un mQtal recouvert d'une couche dlhydrocarbure saturd. Le

The mean square fluctuations for successive slit positions were measured and the corresponding values of the diffusion coefficient were calculated by using theoretical