High Data-Rate, Battery-Free, Active Millimeter-Wave Identification Technologies for Future Integrated Sensing, Tracking, and Communication Systems-On-Chip
Texte intégral
Figure
Documents relatifs
Abstract —Multiple input multiple output (MIMO) technique with equal gain combining (EGC) is considered in this work to enhance the data rate of free-space optical communication
Figure 5.43: Mass flows, percentage of seal volume travelled, maximum contact pressure and minimum film thickness for the reference face seal with a waviness defect of 0.4 µm
If the preamble is detected, the descrambler performs a correlation of each received data (64 bits) with a same scrambler sequence (8 bytes).. After the descrambling, the RS
that the EMT program plays critical role in the generation and maintenance of CSCs or CSC-like cells. In breast cancers, tumor cells undergoing EMT gain CSC properties, including
118 Comparison between simulation results for a ridge and deep ridge S-bend structure of 2-way Wilkinson power combiner.. In the 2x bow-tie and 1x separated bow-tie
The Half-Thru de-embedding and Thru-Load de-embedding is performed by different length of the DUT (S-CPW Transmission line) to prove these methods have good accuracy
In the objective of offering a high performance substrate integrated alternative to existing solutions, a broadband Antipodal Linear Tapered Slot Antennas (ALTSA) based
Bozzi, “Textile microwave components in substrate integrated waveguide technology,” IEEE Transactions on Microwave Theory and Techniques , vol.. Perregrini, “3d printed