• Aucun résultat trouvé

MIMO Hardware Simulator: Algorithm Design for Heterogeneous Environments

N/A
N/A
Protected

Academic year: 2021

Partager "MIMO Hardware Simulator: Algorithm Design for Heterogeneous Environments"

Copied!
10
0
0

Texte intégral

Figure

Figure  1  and  Table  1  present  the  scenario  and  the  movement of the person in it
Figure  3  presents  the  switch  between  the  last  h 11   in  E 2 and the first h 11  in E 3  for the 80 profile of h 11
Figure 4. FIR 147 with 23 multipliers for one h 11  and h 21
Figure 5. Connection between the computer and the  XtremeDSP board.
+2

Références

Documents relatifs

agak). Two types of rotting. namely, white rot and brown rot are briefly discussed. Five important types of fungi are briefly described.. control of any one of the

B) Ce sont ces structures psychiques inconscientes, qui dans leur fonctionnement aveugle (automatisme de répétition) entraînent la déstructuration et/ou la destruction

After a comparative study, in order to reduce the complexity and the latency of the digital block, the output signal of the MIMO simulator is computed in the frequency domain for

After a comparative study, in order to reduce the complexity and the latency of the digital block, the output signal of the MIMO simulator will be computed in the frequency

After a comparative study, in order to reduce the complexity and the latency of the digital block, the output signal of the MIMO simulator is computed in time domain for

In order to have a suitable trade-off between complexity and latency, two solutions can be considered: a time domain approach with FIR filters for the indoor

] Mohamed khaled Bechki, Etude du comportement électrochimique de 1(ferrocenyl)ethanol et nitrophenyleferrocenes, Mémoire de Magister, université Kasdi Merbah-Ouargla,