Hardware options for faster, more efficient programs
SECTION 7 - VARIAN 620/L MODEL NUMBERS
Systems Computer
620/L-00 Systems Computer equipped with 4096 words of Core Memory, Console, Programmed I/O Party Line, Power Supply, Direct Memory Access and Priority Interrupt
Expansion & Memory Options 620/L-01
620/L-02 620/L-95-5 620/L-95-6
620/L-95-7
620/L-95-8
620/L-95-9
Expansion Chassis (Memory and I/O Options) Memory Increment Module - 4096 words Expansion Power Supply
Peripheral back plane wiring panel, right hand - CPU front view, 12 expansion slots (PC)'
Peripheral back plane wiring panel, left hand - CPU front view, 13 expansion slots (PC)
Dual Access Buffer, back plane wiring panel, right hand - CPU front view
Dual Access Buffer, back plane wiring panel, left hand - CPU front view
Mainframe Options 620/L-05
620/L-10
620/L-13 620/L-14
Memory Protect
Hardware Multiply/Divide and Extended Addressing
Real Time Clock Power Failure/Restart
Prerequisite None
620/L-00
620/L-00 or 620/L-Ol None
620/L-01
620/L-Ol, 620/L-95-6
620/L-Ol
620/L-01
620/L-OO 620/L-00
620/L-OO 620/L-00
model numbers
620/L-17 Option Package, includes Hardware MultiplY/Divide and Extended Addressing, Real Time Clock, Power Failure/Restart and Priority Interrupts, 8 multilevel
Input/Output Expansion
Priority Interrupts - 8 multilevel (expansion to 64 levels is allowed)
I/O Party Line Expander (OM 184) Buffer Interlace Controller, Block Transfer supervisor for automatic data transfers for up to 10 peripheral controllers
Single-Ended Dual Access Buffer Controller for 4096 words by 16-bit memory Dual Access Buffer Memory Increment 4096 words by 16 bits, 1 usec memory cycle, including power supply
Multiplexed Dual Access Buffer Controller for two 4096 words by 16 bits, 1 usec memory Buffered I nterlace Controller for
Multiplexed Dual Access Buffer provides block transfer capability for two 4096 words by 16 bits
Buffered I/O Controller, general purpose interface, 8 sense lines, 8 control pulses, 16 bit output register, 16 bit input register.
One of 8 different pulse widths available (5-20,20-73,73-300 usec; .27-1. 1,1-4, 3.5-13,12-50,40-90 msec)
Digital I/O Controller, 8 sense lines, 8 control pulses
ASR-33 (first) and Controller, keyboard/printer with 10 cps paper tape reader and punch, full duplex
620/L-06-A
Spare Teletype Controller, ASR-33/35 or KSR-35 (620/L-06, -07 or -08 only) Spare ASR-33 (620/L-06 only), without controller
Spare ASR-33 (620/L-06-E only), 230 Volt, 50 Hz, without controller
ASR-33 and Controller, used with Teletype Buffer Board for expansion after the first TTY
ASR-33 (first) and Controller, 230 Volt, 50 Hz
ASR-33 and Controller, used with Teletype Buffer Board for expansion after the first TTY,
230 Volt, 50 Hz
KSR-35 (first) and Controller, heavy duty 10 cps Keyboard/Printer, full duplex
Spare KSR-35 (620/L-07 only), without controller Spare KSRI3b (620/L-07-0 only), 230 Volt, 50 Hz, without controller
KSR-35 and Controller, used with Teletype Buffer Board for expansion after the first TTY
KSR-35 (first) and Controller, 230 Volt, 50 Hz
KSR-35 and Controller, used with Teletype Buffer Board for expansion after the first TTY,
230 Volt, 50 Hz
ASR-35 (first) and Controller, Heavy Outy Keyboard/Printer with 10 cps paper tape reader and punch, full duplex
Spare ASR-35 (620/L-08 only), without controller Spare ASR-35 (620/L-08-0 only) 230 Volt, 50 Hz, without controller
ASR-35 and Controller, used with Teletype Buffer Board for expansion after the first TTY
model numbers
model numbers
ASR-35 (first) and Controller, 230 Volt, 50 Hz
ASR-35 and Controller, used with Teletype Buffer Board for expansion after the first TTY,
230 Volt, 50 Hz
Teletype Buffer Board, drives up to 7 TTY Controllers
Card Reader and Controller, 1,000 cards per minute
Card Reader and Controller, 300 cards per minute
Card Punch and Controller, 200 cards per minute
Card Punch and Controller, 300 cards per minute
Card Punch and Controller, 35 cards per minute
Magnetic Tape Unit and Controller, 9-track, 800 bpi, 25 ips, single density, includes control for up to four (4) 9-track magnetic tape units
Magnetic Tape Unit Slave, 9-track, 800 bpi, 25 ips, single deosity
Magnetic Tape Unit and ,Controller, 7-track, Dual Density (200/556 bpi), 25 ips, includes control for up to four (4) 7-track magnetic tape units
Magnetic Tape Unit Slave, 7-track, Dual Density (200/556 bpi), 25 ips
Magnetic Tape Unit and Controller, 7-track, Dual Density (200/800 bpi), 25 ips, includes control for up to four (4)7-track magnetic tape units
620/L-OOX
620-310B
620-31C
620-310C
Magnetic Tape Unit Slave, 7-track, Dial Density (200/800 bpi), 25 ips
Magnetic Tape Unit and Controller, 7-track, Dual Density (556/800 bpi), 25 ips, includes control for up to four (4) 7-track magnetic tape units
Magnetic Tape Unit Slave, 7-track, Dual Density (556/800 bpi), 25 ips
Disc Memory & Controller, fixed head, average access time 17 ms, transfer rate 73.3 KHz words, capacity 30K words, 16 tracks
Disc Memory & Controller, fixed head, average access time 17 ms, transfer rate 73.3 KHz words, capacity 61 K words, 32 tracks
Disc Memory & Controller, fixed head, average access time 17 ms, transfer rate 73.3 KHz words, capacity 123K words,
64
tracksDisc Memory & Controller, moving head, control for up to two drives, average access on track 20 ms, transfer rate 42 KHz words, capacity 585K words, IBM 2315 disc pack Disc slave, moving head, average access on track 20 ms, transfer rate 42 KHz words, capacity 585K words, IBM 2315 disc pack Disc Memory and Controller, moving head, control for up to four drives, average access on track 12.5 ms, transfer rate 80K words per second, capacity 3.625 million 8-bit bytes, IBM 1316 disc pack
Disc Memory and Controller, moving head, control for up to four drives, average access on track 12.5 ms, transfer rate 80K words per second, capacity 7.25 million 8-bit bytes, IBM 1316 disc pack
Disc slave, moving head, average access on track 12.5 ms, transfer rate 80K words per
model numbers
model numbers
second, capacity 7.25 million 8-bit bytes, IBM 1316 disc pack
Drum Memory and Controller,average access time 8.7 ms, approx. transfer rate 1 06K words per second, 16 tracks, capacity 30K words Drum memory and Controller, average access time 8.7 ms, approx. transfer rate 1 06K words per second, 32 tracks, capacity 61 K words Drum Memory and Controller, average access time 8.7 ms, approx. transfer rate 106K words per second, 64 tracks, capacity 123K words Drum Memory and Controller, average access time 8.7 ms, approx. transfer rate 106K words per second, 128 tracks, capacity 246K words Drum Memory and Controller, average access time 8.7 ms, approx. transfer rate 106K words per second, 256 tracks, capacity 491 K words Drum Memory and Controller,.average access time 8.7 ms, approx. transfer rate 106K words per second, 512 tracks, capacity 983K words
Paper Tape Reader & Controller, 300 cps Paper Tape Reader & Controller, 150 cps Bidirectional paper tape spooler. Rewind speed is 200 inches/sec. average .8 inch NAB reels
Paper Tape Punch & Controller, 75 cps.
Table Top or chassis slide (-RM) for 19" rack mounting. For operation at 50 to 100 Hz @ 110/127/220/240 VAC
Paper Tape System, includes time-share controller, 150 cps reader, 75 cps punch
Paper Tape System, includes time-share controller, 300 cps reader, 75 cps punch
One U slot
Displays and Printers 620-72
620-73
620-73A
620-736
620-74
620-74A
620-77
Digital Plotter, 300 steps per second, 0.01"
step size, other sizes are available
Oscilloscope Display (Tektronix model RM 620) plots point to point, 12 bits bi-polar resolution, 0.1 % accuracy, X-Y axis with Z axis blanking, includes dual DAC's analog
±
22 volt power supply, connectors and cablingOscilloscope Display (Tektronix Model 601), 5 inch storage scope
Oscilloscope Display (Tektronix Model 611), (Tektronix Model 611),11 inch storage scope Printer/Plotter and Controller, Statos ®21, Model 2110, 167 steps per second (equivalent to 1000 alphanumeric lines per minute) in asynchronous mode, 0.0125" step size, 80 styli per inch
Printer/Plotter with pedestal and Controller, Statos ® 21, Model 2111, same characteristics as 620/f-74 plus a character generator for 835 steps per second (equivalent to 5000 alpha-numeric lines per minute) in synchronous mode Line Printer, 245 to 1100 Ipm, 132 columns, segmented buffered
model numbers
One U slot
One U slot
One PC slot 620-88 One PC slot 620-88 None
None
One U slot
model numbers
Buffered I/O Controller, general purpose interface, 8 sense lines, 8 control pulses, 16 bit output register, 16 bit input register. One of 8 different pulse widths available (5-20,20-73,73-300 usee;
.27-1.1,1-4,3.5-13,12-50,40-90 msec) Digital I/O Controller, 8 sense lines, 8 control pulses
Relay Contact I/O Module, 16 mercury wetted -cQ:ntact outputs, 50 V A resistive, 3 A or
400 V maximum
Relay Contact I/O Module 16 contact points, voltage levels, 12 VA resistive, 1/2 A or 200 V maximum
Relay Contact I/O Module 16 mercury wetted contact outputs and 16 contact inputs, 50 V A resistive, 3 A or 400 V maximum
Communication Controller. Sixteen line multiplexer which controls up to four 620-61's (sixteen 103 type data sets), allows for pro-grammed bit assembly/disassembly of characters Communication Line-Control Module. Provides interface between Communication Controller (620-60) and four Bell 103 type or equivalent data sets.
Data Set Cable, 25 feet, interconnects two data sets and a Line-Control Module (620-61 ) Automatic Call Unit Controller. The ACU controller provides program control of the 801 (A/C) Data Auxiliary Set and permits dialing any telephone number in the switched telephone network. Includes a 10-foot data set cable.
Data Set Controller - Bell 201 type or equivalent full/half duplex synchronous operation. Speed up
One U slot
620-65B
620-65C
620-66A
620-66B
620-67
620-68
to 4800 baud, single character, buffered, software sync recognition, code transparency, automatic answer. Includes a 10-foot data set cable.
Dual 620-65A's Data Set Controllers. Includes two 10-foot data set cables.
Data Set Controller - Bell 201-301 type or equivalent, full/half duplex synchronous operation, double character buffering hardware line synchronization (sync characters may be changed under software control), code transparency, automatic answer. The 620-65C may be operated in conjunction with the DMA channel and Buffer Interlace Controller (620-20). Includes a 10-foot data set cable.
Data Set Controller - Bell 103 type or equivalent, full/half duplex asynchronous operation, speed up to 300 Baud, 9,10, or 11 bit character format, with automatic answering capability. Includes a 10-foot data set cable.
Dual 620-66A's Data Set Controllers:
Includes two 10-foot data set cables.
Data Set Controller - Bell 202 type or equivalent, full/half duplex asynchronous operation, speed up to 2000 Baud, 9,10, or 11 bit character format, Reverse Channel, automatic answer, hardware parity checking, data transfers are under program control or the Buffer InterlaceCoritrolier option may be utilized. Includes a 25-foot data set cable.
Communication Controller. The 620-68 includes a 64 channel Multiplexer, line control buffer storage for 16 channels, and chassis space for: an additional line control buffer for 16 channels (1-Line Storage Module 620-68A) and line control modules for 32 channels. When expanding to more than 32 channels, a 620-68B expension chassis is required in addition to Line Storage modules and Line Control Modules.
model numbers
One U slot
One U slot
One U slot
One U slot
One U slot
model numbers
Line Storage Module. 16-channelline buffer, line control modules for 16 channels may be connected to a Line Storage Module. First 620-68A will fit in the 620-68.
Line Expension Chassis and Power Supply Expansion for channel 33 to 64.
Line Control Module. With a RS2328 interface, 4 channels of full/half duplex asynchronous/
synchronous operation.
Line Control Module. With a CCITT interface, 4 channels of full/half duplex asynchronous/
synchronous operation.
Line Control Module. For interfacing to a two-wire discrete communication system, 8 channels of half/duplex asynchronous operation.
Line Control Module. For interfacing to a two-wire discrete communication system, 4 channels of half/duplex asynchronous operation.
Line Control Module. For interfacing to a relay communication system, 8 channels of full/half duplex asynchronous operation.
Line Control Module. With a MIL 1888 interface,2 channels of full/half duplex synchronous operation.
Cable from a Line Control Module to two Modems 10 feet each with mating Modem connectors.
Cable from a Line Control Module to two Modems 25 feet each with mating Modem connectors.
Cable from a Line Control Module to two Modems 50 feet each with mating Modem connectors.
model numbers
Analog-to-Digital Converter: 13-bit binary,
±
10 volts F.S. input, 55 KHz throughput (max), Sample and Hold input and programmable timerAnalog Input System: ADC with 13-bit binary, 55 KHz throughput, Sample and Hold, programmable timer. Multiplexer with 16 single-ended channels expandable to 256 channels
Analog Input System: ADC with 13-bit binary, 55 KHz throughput, Sample and Hold, programmable timer. Multiplexer with 16 differential channels expandable to 256 channels
One PC slot
Multiplexer Module, includes multiplexer control One PC slot and 16 single-ended input channels. Input is
±
10 620-88 volts for full scale and 100 meg. ohms impedance Multiplexer Expansion Module. 16 single-ended input channelsMultiplexer Module, includes multiplexer control and 16 differential input channels.
Input is
±
10 volts for full scale and 100 meg.ohms impedance
Multiplexer Expansion Module. 16 differential input channels
DAC Module, one 10-bit binary DAC,
±
10 volts, full scale output at +5 ma (max), includes DAC controlDAC Module, two 10-bit binary DAC, DAC Expansion Module, two 10-bit
binary DAC 620-870 or 620-870A
DAC Module, one 12-bit binary DAC,
±
10 volts full scale output at±
10 ma (max), includes DAC controlOne PC slot 620-88
model numbers includes DAC control
DAC Expansion Module, two 12-bit binary DAC
DAC Module, one 14-bit binary DAC,
±
10 volts full scale output at±
10 ma (max), includes DAC controlDAC Module, two 14-bit binary DAC, includes DAC control
DAC Expansion Model, two 14-bit binary DAC
Analog Power Supply: Input voltage 115/230 VAC
±
10% 47 Hz to 63 Hz. Input current19-inch Cabinet: 30 inches deep, 63-inch panel height, includes side panels, cooling unit and mounting of standard components 19-inch Cabinet: 30 inches deep, 63 inches high, side panels, cooling unit with casters and mounting of standard components
One PC slot 620-88 One PC slot
620-871 or 620-871A One PC slot
model numbers
620/L-92-0 I/O Cable consisting of a cable of optional None length (5' increments to 20') with
paddle-board connectors at each end
620/L-92-1 I/O Cable Adapter - 620/L I/O connector None to 620/i type connector
620/L-92-2 I/O Cable consisting of a cable of optional None length (5' increments to 25') with 620/L
paddleboard connector on one end and 620/i 75 pin male connector at other end
620/L-92-4 26 Pin Chassis Mount Interrupt Cable None Connector Set - female connector only
with all necessary hardware for mounting, wiring, and keying
620/L-92-5 I/O Connector Tool Kit consisting of crimp None tool, removal tool, and insertion tool
620/L-92-6 I nterrupt Cable consisti ng of a cabl e of None optional length (10' to 20') with a 44 pin
edge board connector, and 26 pin female connector and miscellaneous mounting hardware
620-92-7 620/L Extender Board None
620/L-92-8 44 pin Edge Board Connector and Hood None Assembly
620/L-92-9 Interrupt Cable consisting of cable of None optional length (5' increments to 20')
with 26 pin female connector only and mounting hardware
620-92-10 OM 135-0 ... Multi-usage socket board None . 630-92-11 OM 135-1 ... Multi-usage socket board None
kit consisting of a board, 54 individual 14 pin sockets, 6 individual 16 pin sockets (sockets not mounted on board)
620-92-12 OM 135-2 ... Multi-usage socket board None kit consisting of a board, 110 individual
14 pin sockets, 10 individual 16 pin sockets (sockets not mounted on board)
model numbers
620·92·13
620/L·95·1 620/L·95·2
7·14
OM 135·3 ... Multi·usage socket board kit consisting of a board, 156 individual 14 pin sockets, 24 individual 16 pin socket (sockets not mounted on board) Spares Kit, Module
Spares Kit, Components
None
None None