Visando a complementação do método aqui proposto, são feitas as seguintes recomendações:
a. Desenvolver um banco de dados para cadastramento das subfunções e componentes similares de produtos mecatrônicos, inserindo nele os modos de falhas de cada componente. Esse banco de dados irá facilitar a construção das matrizes de forma rápida e eficiente;
b. Desenvolver uma sistemática de resgate de dados de falhas de componentes para formação de uma memória técnica que possibilitará a melhoria das atividades no desenvolvimento do projeto conceitual de produto mecatrônico;
c. Ampliar e aprofundar os estudos de pesquisa na área de projeto conceitual de produtos mecatrônicos, no intuito de minimizar os custos do ciclo de vida do produto, tornando-os cada vez mais competitivos no mercado globalizado;
d. Integração do CPCPM no MdpM. O MdpM é uma metodologia abrangente as fases de desenvolvimento de projeto, enquanto o CPCPM é focado na fase de projeto conceitual com inserção da confiabilidade. A integração das duas pode vir a tornar-se uma metodologia de referência no desenvolvimento de projeto de produtos mecatrônicos;
e. Desenvolvimento de uma ferramenta de software para operacionalização do CPCPM.
REFERÊNCIAS
AMEROGEN, J.V.; BREEDVELD, P. Modeling of Physical System for the Design
and Control of Mechatronic Systems. Annual Reviews in Control, Enscheda,
Netherlands, v. 27, p. 87-117, 2003.
ARUNAJADAI, S. G.; STONE, R. B.; TURMER, I. Y. A Framework for Creating a
Function-based Design Tool for Failure Mode Identification. Trabalho
apresentado no ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference – DETC’02, Canadá, 2002.
AVIZIENIS, A.; LAPRIE, J-C.; RANDELL, B. Fundamental Concepts of
Dependability. Newcastle, UK: University of Newcastle, 2001.
BAXTER, M. Projeto de Produto. São Paulo, Brasil, Editora Blucher, 2008. BEHBAHANI, S.; SILVA, C.W. Reliability Tradeoffs of a Complex Mechatronic
System in the Early Design Stage. International Journal Manufacturing Research,
Vancouver, Canada, v. 2, n. 1, p: 51-72, 2007.
BONFÉ, M.; FANTUZZI, C. Design and Verification of Mechatronic Object-
Oriented Models for Industrial Control Systems. Emerging Technologies and
Factory Automation, Lisboa, Portugal, 2003a.
BONFÉ, M.; FANTUZZI, C. Design and Verification of Industrial Logic
Controllers with UML and Statecharts. Control Applications (CCA), IEEE
International Conference on, Lisboa, Portugal, 2003b.
BONFÉ, M.; FANTUZZI, C.; SECCHI, C. Behavioral Inheritance in Object-
Oriented Models for Mechatronic System. Int. J. Manufacturing Research, vol. x,
No. x, pp.xxx-xxx, Ferrara, Italy, 2007.
CARCHIA, M. Electronic/Electrical Reliability. Carnegie Mellon University, Pittsburgh, USA, 1999.
CHU, T. L. et al. A Review of Software-Induced Failure Experience. International Meeting on Nuclear Plant Instrumentation Control and Human Machine Interface Technology, USA, 2006.
Department of the Army, Headquarters. Reliability/Availability of Electrical &
Mechanical System for Command, Control, Communications, Computer, Intelligence, Surveillance and Reconnaissance (C4ISR) Facilities. Washington,
DESIGN ENGINEERING LAB, Repository Design. Disponível em
http://designengineeringlab.org. Acesso em 06/10/2011.
DoD – DEPARTMENT OF DEFENSE. Reliability Prediction of Electronic Equipment. MIL - HDBK -217F. NOTICE 2, Washington, DC, USA, 1995.
DoD – DEPARTMENT OF DEFENSE. Military Handbook Electronic Reliability
Design Handbook. MIL- HDBK-338B. Washington, DC, USA,1998.
DHILLON, B. S. Design Reliability: Fundamentals and Applications. Boca Raton, Florida: CRC Press, 1999.
FENG, S. C.; SONG, E. Y. Information Modeling of Conceptual Design
Integrated with Process Planning. Trabalho apresentado no Sympósio on Design
for Manufacturability International Mechanical Engineering Congress and Exposition, Orlando, Flórida, USA, 2000.
FRADEN, J. Handbook of Modern Sensors. 3. ed, San Diego, USA: Spring, 2004. FREITAS, R. D. Análise de Confiabilidade e Segurança de Sistemas
Mecatrônicos Altamente Integrados e Complexos. 2008. 200f. Dissertação
(Mestrado em Mecatrônica) - Escola Politécnica e Instituto de Matemática, Universidade Federal da Bahia, Salvador, 2008.
GODDARD, P. L. Software FMEA Techniques. Proceedings Annual Reliability and Maintainability Symposium, 2000.
GOEL, A.; GRAVES, R.J. Using Failure Mode Effect Analysis to Increase
Electronic Systems Reliability. New York, USA: Rensselaer Polytechnic Institute,
2007.
HAREL, D. Statecharts: A Visual Formalism for Complex Systems. Science of Computer Programming vol. 8 pp: 231-274, 1987.
HARI, A.; WEISS, M. P. CFMA- An Effective FMEA Tool for Analysis and
Selection of the Concept for a New Product. Trabalho apresentado no ASME
Design Engineering Technical Conference, Design Theory and Methodology Conference - DETC99/DTM-8756, Las Vegas, 1999a.
HARI, A., WEISS, M. P. Failure Mode Analysis in the Concept Stage Eliminates
Failure Before they Reach the Customers. Trabalho apresentado à 12 th
HEUSER, B; WITSCH, D.; KATZKE, U. Automatic Code Generation from a UML
Model to IEC-61131-3 and System Configuration Tools. International Conference
on Control and Automation, Budapest, Hungary, 2005.
HEVERHAGEN, T.; TRACHT, R. Using Stereotypes of the Unified Modeling
Language in Mechatronic Systems. International Conference on Information
Technology in Mechatronics, Istambul, Turkey, 2001.
HUANG, B., ZHANG, H., LU, M. Software FMEA Approach Based on Failure
Modes Database. Department of System Engineering, Beihang University, BeiJing,
China, 2009
IEC- 61131-3 Programmable Controllers. International Electrotechnical Comission (IEC), 2003.
IEC-61499-1 Functions Blocks. International Electrotechnical Comission (IEC), 2005.
ISERMANN, R. Mechatronic Systems: Concepts and Applications. Transactions of the Institute of Measurement and Control, Germany, v. 22, n. 1, p. 29-55, 2000. MASCARENHAS, A.P.F.M. Metodologia para Desenvolvimento de Produtos
Mecatrônicos Integrando Engenharia de Software e Engenharia de Produtos.
2007. 183 f. Dissertação (Mestrado em Mecatrônica) - Escola Politécnica e Instituto de Matemática, Universidade Federal da Bahia, Salvador, 2007.
ONWUBOLU, G. C. Mechatronics Principles and Applications. São Paulo: Elsevier, 2005.
KORSAH, K.,MUHLHEIM, M. D., HOLCOMB, D. E. Industry Survey of Digital I&C
Failures. Department of Energy the USA, 2006.
ORMON, S.W.; CASSADY, C.R.; GREEWOOD, A.G. A Simulation-based
Reliability Prediction Model for Conceptual Design. Trabalho apresentado ao
Annual Reliability and Maintainability Symposium, Philadelphia, USA, 2001. PAHL, G. et al. Projeto na Engenharia. São Paulo: Blucher, 2005.
ROTONDARO, R. G., MIGUEL, P. A. C., GOMES, L. A. V. Projeto do Produto e do
Processo. São Paulo : Editora Atlas, 2010.
ROSENFELD, F. A. et al. Gestão de Desenvolvimento de Produtos. São Paulo: Editora Saraiva, 2006.
SANTANA, J. A. S.; LEPIKSON, H. A. Confiabilidade de Produto Mecatrônico em
Projeto Conceitual. In: CONGRESSO NACIONAL DE ENGENHARIA MECÂNICA,
5o. 2008, Salvador. Resumos. Salvador: UFBA, 2008. CON08-0297, v. 1, p. 234.
SECCHI, C.; BONFE, M.; FANTUZZI, C. On the Use of UML for Modeling
Mechatronic Systems. IEEE Transactions on Automation Science and Engineering,
vol.4 No. 1, Seattle, USA, 2007.
SILVA, A. UML 2.0 do Requisito à Solução. São Paulo, Editora Érica, 2010
SMITH, J.; CLARKSON, P.J. Design Concept Modelling to Improve Reliability. Journal of Engineering Design, Cambridge, UK, v. 16, n. 5, p. 473-492, 2005.
SMITH DAVID. Reliability Maintainability and Risk.United Kingdom, Elsevier, 2005
STONE, R.B., TUMER, I.Y., WIE, M.V. The Function-Failure Design Method. Trabalho apresentado à International Design Engineering Technical Conference, Design Theory and Methodology Conference, Washington, DC, USA, 2003.
STRAWBRIDGE. Z.; McADAMS, D. A.; STONE, R. B. A Computational Approach
to Conceptual Design. Trabalho apresentado à ASME Design Engineering
Technical Conference, Montreal, Canadá, 2002.
THRAMBOULIDIS, K, Model-Integrated Mechatronics – Toward a New Paradigm
in the Development of Manufacturing Systems. Journal of the Industrial
Electronics, IEEE Transactions on Industrial Informatics, vol. 1, no 1, February, 2005.
THRAMBOULIDIS, K.; PERDIKIS, D.; KANTAS, S. Model Driven Development of
Distributed Control Applications. The International Journal of Advanced
Manufacturing Technology, vol. 33, pp:233-242, 2007.
TRANORIS, C.; THAMBOULIDIS, K. Integrating UML and the Function Block
Concept for the Development of Distributed Control Applications. IEEE
International Conference on Emerging Technologies and Factory Automation, Lisboa, Portugal, 2003.