8.1 Sugestões para Trabalhos Futuros
Abaixo algumas sugestões para trabalhos futuros:
• Elaborar um estudo comparando os resultados do modelo 2D (simplificado) com os dados de uma análise experimental; • Implementação de novas técnicas de otimização para a atualiza-
ção dos parâmetros, como os algoritmos genéticos, redes neurais, etc;
• Aplicação da metodologia proposta em outras geometrias de flange, para que o procedimento possa ser aprimorado;
• Utilizar a metodologia para otimizar um número maior de modos; • Trabalhar com a redução de ordem do modelo combinado com a
111
Referências
ARORA, J. S. Optimization of Structural and Mechanical Systems. [S.l.]: 2 ed. Iowa, World Scientific, 2007. Citado 6 vezes nas páginas 61,62,64,65,66e67.
BENDSØE, M. P.; SIGMUND, O. Topology Optimization: Theory, Methods and Applications. [S.l.]: Springer-Verlag, 2003. Citado na página69.
CARDOSO, E. L. Controle de Complexidade na Otimização
Topológica de Estruturas Contínuas. Dissertação (Mestrado) — Escola de Engenharia da Universidade Federal do Rio Grande do Sul, Porto Alegre, 2000. Citado na página 85.
CLOUGH, R. W.; PENZIEN, J. Dynamics of structures. [S.l.]: McGraw-Hill, 1993. Citado na página53.
COSTELLO, M. J. Understanding the vibration forces in induction motors. Proc. of the 19th Turbomachinery Symposium, Dallas, TX, 1990. p. 67–76, 1990. Citado na página43.
CRAIG, R. R. Structural dynamics: an introduction to computer methods. [S.l.]: John Wiley, 1981. Nenhuma citação no texto. DEB, K. An efficient constraint handling method for genetic algorithms. Computer Methods Applied Mechanics Engineering, 2000. v. 186, p. 311–338, 2000. Citado na página76.
EBERHART, R. C.; SHI, Y. Comparison between genetic algorithms and particle swarm optimization. Evolutionary Computation
Proceedings - IEEE World Congress on Computational Intelligence, 1998. p. 69–73, 1998. Citado na página75.
ENGELBRECHT, A. P. Fundamentals of Computational Swarm Intelligence. [S.l.]: John Wiley and Sons, 2005. Citado na página71. FILHO, G. F. Motor de Indução: Princípios de Funcionamento, Características Operacionais, Aplicaç oes, Acionamentos e Comandos. [S.l.]: Érica, São Paulo, 2000. Citado na página37.
112 Referências
FINLEY, W. R. Noise in induction motors-causes and treatments. IEEE Transactions of Industry Applications, 1991. v. 27, n. 6, 1991. Citado na página43.
FINLEY, W. R.; HODOWANEC, M.; HOLTER, W. An analytical approach to solving motor vibration problems. IEEE Trans. on Industry Applications, 2000. v. 36, n. 5, p. 1467–1480, 2000. Citado na página43.
FONTAN, M. et al. Inverse Analysis in Civil Engineering: Applications to Identification of Parameters and Design of Structural Material Using Mono or Multi-Objective Particle Swarm Optimization, Theory and New Applications of Swarm Intelligence. [S.l.]: InTech, 2012. Citado na página74.
GOLDMAN, S. Vibration Spectrum Analysis. New York, USA: Industrial Press Inc., 1999. Citado na página46.
GONÇALVES, V. S. Desenvolvimento de uma Metodologia Numérica Para a Predição dos Três Primeiros Modos de Vibração de Um Motor Elétrico Fixo em Base Rígida. Dissertação (Mestrado) — Universidade Federal de Santa Catarina, 2012. Citado 2 vezes nas páginas88e89. HASSAN, R.; COHANIM, B. E.; WECK, O. L. de. Comparison of particle swarm optimization and the genetic algorithm. In: AMERICAN INSTITUTE OF AERONAUTICS AND
ASTRONAUTICS. 46th AIAA ASME ASCE AHS ASC Structures, Structural Dynamics, and Materials Conference. Austin, Texas, 2005. Citado na página75.
HOLLAND, J. Adaptation in natural and Artificial Systems. [S.l.]: The University of Michigan Press - Ann Arbor, Michigan, USA, 1975. Citado na página71.
HWANG, D. et al. Vibration transmissibility reduction module with flexure mechanism for personal tools. Journal of Mechanical Science and Technology, 2010. p. 223 – 226, 2010. Citado 3 vezes nas páginas 85,86e87.
IEC. International Eletrotechnical Commission - IEC 60072 Dimensions and Output Series for Rotating Electrical Machines. Standard, Geneva, 1991. Citado na página29.
IEC-60034. International Eletrotechnical Commission - IEC 60034 Rotating Electrical Machines Part 14: Mechanical Vibration of Certain
Referências 113
Machines With Shaft Heights 56mm and Higher - Measurement, Evalution and Limits of Vibration Severety. Standard, Geneva, 2007. Citado na página31.
IEC-60072. International Eletrotechnical Commission - IEC 60072 Dimensions and Output Series for Rotating Electrical Machines. Standard, Geneva, 1991. Citado na página31.
JR, M. V.; CARDOSO, E. L.; STAHLSCHIMDT, J. Particle swarm optimization and identification of inelastic material parameters. Engineering Computations, 2013. v. 30, n. Iss:7, p. 936–960, 2013. Citado 2 vezes nas páginas71e81.
KARUSH, W. Minima of Functions of Several Variables with Inequalities as Side Constraints. Dissertação (Mestrado) — Dept. of Mathematics, Univ. of Chicago, Illinois, 1939. Citado na página 64. KAVEH, A.; LAKNEJADI, K. A new multi-swarm multi-objetive optimization method for structural design. Advances in Engineering Software, 2013. v. 58, p. 54–69, 2013. Citado na página66.
KENNEDY, J.; EBERHART, R. Particle swarm optimization. 1995. Citado 3 vezes nas páginas72,75e76.
KENNEDY, J.; MENDES, R. Population structure and particle swarm performance. Proceedings of the 2002 Congress on Evolutionary Computation, 2002. p. 1671–1676, 2002. Citado 2 vezes nas páginas 73e74.
LEISSA, A. W.; SO, J. Accurate vibration frequencies of circular cylinders from three-dimensional analysis. Journal of the Acoustical Society of America, 1995. v. 98, p. 2136–2141, 1995. Citado na página 44.
LIEW, K. M.; HUNG, K. C.; LIM, M. K. Vibration of stress-free hollow cylinders of arbitrary cross section. Journal of Applied Mechanics, 1995. v. 62, p. 718–724, 1995. Citado na página44. MAIA N. M. M.AND SILVA, J. M. M. Theoretical and experimental modal analysis. 1997. 1997. Citado na página50.
MONTERO, D.; CARDOSO, E. Otimização por Enxame de Partículas em Treliças: Estudo de Parâmetros e Integração com Programa Comercial de Elementos Finitos. [S.l.], 2013. Trabalho de conclusão de curso - Engenharia Mecânica. Citado 2 vezes nas páginas76e77.
114 Referências
NASSER, M. A. Modal based predictive design and analysis of electric motors. In: Conference and Exposition on Structural Synamics. [S.l.: s.n.], 2004. Citado na página43.
NEMA. NATIONAL ELECTRICAL MANUFACTURERS
ASSOCIATION - NEMA MG-1: Motors and Generators. Standard, Virginia, 2011. Citado 3 vezes nas páginas29,31e45.
OZTURK, C. O. et al. Origins of the electromagnetic vibrations in series fractional horsepower motors. Proc. of the ISMA - Tools for Noise and Vibration Analysis, 1994. v. 19, n. 1, p. 1103–1114, 1994. Citado na página43.
PARKER, R. G.; MOTE, C. D. Exact perturbation for the vibration of almost annular or circular plates. Journal of Vibration and Acoustics, 1996. v. 118, p. 436–445, 1996. Citado na página45. RADLE, P. J.; ZEILER, J. M.; RICHARDS, D. Power tool with vibration isolated handle. U.S. Patent 5697456, 1997. 1997. Citado na página85.
RAO, S. Mechanical Vibration. 3ed.. ed. New York, USA: Addison- Wesley, 2005. Pp 492-506. Citado 3 vezes nas páginas 49, 51 e56.
RAO, S. S. Engineering Optimization - Theory and Practice. [S.l.]: 4 ed. New Jersey, John Wiley and Sons, Inc., 2009. Citado 2 vezes nas páginas63e67.
SANTOS, H. Lateral critical speeds analysis – RTEC0035/2008. [S.l.], 2008. Citado na página46.
TIMAR, P. L. et al. Noise and Vibration of Electrical Machines. [S.l.]: Elsevier Science Publishers, 1989. Citado na página43.
TSENG, J. G.; WICKERT, J. A. On the vibration of bolted plate and flange assemblies. Journal of Vibration and Acoustics, 1994. v. 116, n. 4, p. 468–473, 1994. Citado na página45.
TUSTIN, W. Randon Vibrations and Shock Testing. [S.l.]: Santa Barbara: Equipment Reliability Institute, 2005. Citado na página30. TZOU, K. I.; WICKERT, J. A.; AKAY, A. Frequency clusters in the spectrum of annular cylinders. Journal of Applied Mechanics, 1998. v. 65, p. 797–803, 1998. Citado na página44.
Referências 115
VERVOORDELDONK, M. J.; RUIJL, T. A. M.; RIJS, R. M. G. Development of a novel active isolation concept. ASPE - Spring Topical Meeting, 2004. 2004. Citado na página85.
YUAN, J.; DICKINSON, S. M. The free vibration of circularly cylindrical shell and plate systems. Journal of Sound and Vibration, 1994. v. 175, n. 2, p. 241–263, 1994. Citado na página44.
119