Load the Label List Utility (05-00)
To load the utility, respond to the following prompt:
o
0001Program name: U I I I I I I I I I I I I I I I
Dev i ce addl-ess:
Partition number:
F'l-ess ENTER 05-00
l~ _________ ... J
1. Insert the diskette containing the utility into a diskette drive.
2. Enter SYSLIST as the program name.
3. Enter the device address of the diskette drive where the utility diskette is inserted.
4. Enter the number of the partition where the program will execute. (If a partition number is not entered, the number defaults to the number of the partition associated with the keyboard at which you are working.) 5. Press the Enter key.
The system loads the utility and displays the label list option prompt (34-01).
Select the Label List Option (34-01)
When the utility is loaded, the following prompt is displayed:
SYSLIST - LABEL LIST UTILITY
Options cll-e
i. Data set Label 3. Dil-ectol-Y
2. Data set name 4. Volullle LabeL Select option:
1. Select an option:
• Enter a 1 to display or print the data set labels on a diskette.
• Enter a 2 to display or print all the data set names on a diskette.
• Enter a 3 to display or print a listing of the label directory.
• Enter a 4 to display or print a volume label and format number.
2. Press the Enter key.
The insert diskette prompt (34-02) is displayed.
Note: The following sequence of prompts is the same (except where noted) for every label list option.
34-01
insert Diskette With the Labels to be Listed (34-02)
After you select the option number, the following prompt is displayed:
Insert diskette to be listed from and enter Device addl-ess: LI I I I
F'l-ess ENTER
Insert the diskette to be listed from into a diskette drive. Enter the device address and press the Enter key.
If the diskette to be listed from is volume-protected, the volume-protected prompt is displayed. Enter the owner ID and press the Enter key.
If your system has a printer installed, the specify output device prompt (34-03) is displayed. Otherwise, the list of labels (34-07) is displayed.
If the diskette has no data set labels to be listed, an error occurs. After you press the Reset key, the insert diskette prompt (34-02) is redisplayed.
34-02
Specify the Output Device (34-03)
The following prompt is displayed if your system has a printer installed:
Which output device ~i II be used?
Options are 1. Display 2. Pl- inter
Select option: IJ Press ENTER
Enter a 1 to list the labels on the display screen, and press the Enter key. The list of labels (34-07) is displayed.
Enter a 2 to print the labels, and press the Enter key. The printer device address prompt (34-04) is displayed.
34-03
Display the Labels on the Display Screen (34-07)
The system displays only as many labels, data set names, or directory information as will fit on the display screen at one time.
W(lF<tT I LE
SCR{'lTCH t-IASTE~:2 ACCTSF,EC
Press ENTER to continue 34-·07
l~ _________ --",J
Press the Enter key each time you want additional labels on the diskette to be displayed.
If you are displaying directory information, after the last display of information, the additional directory information prompt (34-08) is displayed.
If you are not displaying directory information, after the last display of labels or names, the utility-completed prompt (34-78) is displayed.
Additional Directory Information (34-08)
Remaining diskette space (K-bytes) Diskette fOl-mat
Press ENTER to continue
01.24
The first line of the prompt shows the total number of K bytes remaining to be used on the diskette. These bytes follow the last end-of-extent value (K
=
1024).
The second line of the prompt shows the format number of the diskette. (See Diskette Format in Chapter 1.)
After you press the Enter key, the utility-completed prompt (34-78) is
34-08
Specify Printer Device Address (34-04)
If you select the print option in the specify output device prompt (34-03), the following prompt is displayed:
Entel- pr inter dev i ce address: LI I I I
Press ENTER 34-04
l ]
Enter the printer device address and press the Enter key.
If you are printing a list of the volume labels or the data set labels, the line length prompt (34-05) is displayed.
If you are printing a listing of data set names or a directory, the printing begins and the listing in process prompt (34-06) is displayed.
Specify the Number of Characters to be Printed Per Line (34-05)
If you are printing a complete set of volume labels or data set labels, the following prompt is displayed:
How many characters do you want printed per line?
Options are 1. 80 2. 128
Select option' IJ Press ENTER
1. Select an option:
• Enter a 1 to print 80 characters per line.
• Enter a 2 to print 128 characters per line.
2. Press the Enter key.
If you specify 80 characters per line, the information will be printed on two lines per label. Sample listings are provided at the end of this chapter.
The system begins printing the listing and displays the listing in process prompt (34-06).
34-05
Listing in Process (34-06)
The following prompt is displayed while the listing is being printed:
SYSLIST in process.
34-06
l~~~~---""J
If the Cmd, End of Job key sequence is used to stop the printing or the printing is otherwise interrupted, the printer may continue to print data momentarily in order to empty the printer's buffer.
When the printing is completed, the utility-completed prompt (34- 78) is displayed.
Utility Completed (34-78)
After all the labels are listed, the utility-completed prompt is displayed, allowing you to exit from the utility or restart the utility. If you restart the utility, the label list option prompt (3401) is redisplayed.
label Listing Examples
The following examples show the more commonly used fields of the labels.
See the Diskette General Information Manual for more information about diskette labels.
Data Set label Listing with SO-Character Lines
o tJ
D fJ
128R17010 20005 PIL04790621 75128R20006 23006 I 50
Directory Listing
Volume Label Listing with 128-Character Lines