\ )
)
SUPERVISOR MACROS C ••• Cont'd}
Define options and Configuration requirements to be included in Physical IOCS ( ... Cont'd) Operation Operand
JIB=
{5xn~arts}
Explanation
Specifies for foreground partition n the number of programmer logical units. The minimum value for m is 10, and the maximum value is 241.
Specifies the number of 110 devices attached to the system. The maximum specification allowed is 254, the minimum is 4. Each unit requiring an ADD entry must be included in n.
Specifies the number of Job Information Siocks (JIBs) for the system (the minimum is 5, the maxi-mum is 2551. Requirements are:
1. One JIB for each temporary logical unit assign-ment.
2. One JIB for each alternate logical unit assign-ment.
Indicates the number of Resource Usage Records (RURs). The default value d is equal to the no. of partitions supported plus 10. The minimum value accepted is the no. of partitions increased by 2.
Specifies the maximum number of Start/Stop lines for the Model 115 or 125 with the Integrated Communications Adapter (lCA). The minimum specification is 0 and the maximum is 16. The specified value is en'tered in the first byte of the Line Mode Table (MODTAB) and the table is generated with this number of entries for Start/
Stop line mode settings. It the parameter is omitted and MOOEL=115 or 125, then n defaults to 4 .
1141
I
DEVICE TYPE CODES
Device-Card Type
Code Actual IBM Device X'nn' Device Type
2400T9 9-track Magnetic Tape units 50 Magnetic Tape devices 24QOT7 7-track Magnetic Tape units 50
341OT9 9-track 3410 Magnetic Tape units 53 3410T7 7-track 3410 Magnetic Tape units 53 3420T9 9-track 3420 Magnetic Tape units 52 3420T7 7-track 3420 Magnetic Tape units 52
8809 8809 Magnetic Tape unit 5A
1442Nl 1442Nl Card Read Punch 30 Card Read Punches
2520B1 2520B1 Card Read Punch 31
2560 2560 Multifunction Card machine 33
2596 2596 Card Read Punch 30
3525RP 3525 Card Punch (witch optional read 32 feature)
5425 5424/5425 Multifunction Card Unit 34
2501 2501 Card Reader 10 Card Readers
PRT1 3211,3203-4,3203-5 and 3289-4 Printer 43 Printers
1403 1403 Printer 40
3277 3284,3286, 3287, 3288 Printers with BO (local 3270) 3277 Control Unit or 3284, 3286, 3287,
3288, and 3289 Printers with 3274 Control Unit. MODE operand must be entered as X'Ol'_
3277B 3284,3286, 3287,3288 Printers with BO (local 3270) 3277 Control Unit or 3284, 3286, 3287,
3288, and 3289 Printers with 3274 Control Unit, attached in burstmode to a mUltiplexor chan_ (MODE operand must be entered as X'Ol').
3800 3800 Printing Subsystem 45
3800B 3800 Printing Subsystem with Burster 45 Trimmer-Stacker (BTS)
3800BC 3800 Printing Subsystem (BTS and 45 Additional CGS
3800e 3800 Printing Subsystem with Additional 45 Character Generation Storage (CGS)
5203 5203 Printer 4C
5203U 5203 Printer with UCS feature 40
1050A 3210,3215 Console 00 Printer Keyboards
Printer Keyboards
3286-2 in Printer Keyboard Mode 00
1250 Model 115 or Model 125 Integrated B2 Display Operator Console Display Operation Console
Model 138/148 Console in 115/125 Console Display Emulation Mode
125DP Model 115 or Model 125 Integrated B2 Display Operator Console
Model 138/148 Console in 115/125 Console with 5213 Console Printer attached
3277 3277 Display Operator Console BO 3277 3284,3286 or 3287 Console Printer 80
(the MODE operand must be entered as X'02')
11-42
DEVICE TYPE CODES ( •••• Cont'd)
Device-Card Type
Code Actual I BM Device X nn Device Type
UN5P Unsupported Device FF Unsupported Device
UN5PB Unsupported I?evice FF
FBA 3310/3370 Direct Access Storage Device 90 OA50 2311 2311 Disk Storage Device 60 2314 2314 Direct Access Storage Facility 62 2314 2319 Disk Storage Facility 62 3330 3330 Disk Storage, ModeLl and 2. or 63 (with or without 3340 Data Module Model 70)
3340 3344 Direct Access Storage 68 3340R 3344 Direct Access Storage with RPS 68 3340 3340 Disk Storage without RPS Feature 69
(with or without 3340 Data Module
/ Model 351
3340 3340 Disk Storage without RPS Feature 6A (with or without 3340 Data Module Model 70)
3350 3350 Disk Drive 67
1419 1255 Magnetic Character Reader 72 MICR-Magnetic Ink 1419 1259 Magnetic Character Reader 72 Character Recognition 1419 1419 Magnetic Character Reader 72 Devices 1419P 1419 Dual Address Adapter Primary 73
Control Unit
14195 1419 Dual Address Adapter Secondary 74 Control Unit
3895 3895 Document Reader/Inscriber 70 Reader/Inscriber 2701 2701/2715 Data Adapter unit DO Teleprocessing lines 2701 Integrated Communications Adapter 02
(Mod.1135)
2702 2702 Transmission Control unit 01 2703 2703 Transmission Control unit 02 2703 Integrated Communication Adapter 02
(Mod.11151125)
2703 3704/3705 Communication ContrOller 02 in Emulation Mode
3704 3704 Communication Controller DC
/
3705 3705 Communication Controller DC 3791L 3791 Local Communication Controller DE 3274-1A3705 SDLC ICA on 4300 Processors (Mode must be entered AS10)
LCA2 3791 Cluster Controller, Locally Attached DE
1419 1270 Optical Reader/Sorter 72 Optical Readers 1419P 1275 Optical Reader Sorter 73
Primary Control Unit
14195 1275 Optical Reader Sorter 74
)
Secondary Control Unit
1287 1287 Optical Reader 77
1288 1288 Optical Page Reader 77 3881 3881 Optical Mark Reader 11 3886 3886 Optical Character Reader 7C
3540 3540 Diskette Input/Output Unit 80 Diskette 7443 7443 System Recording File 88
2260 2260 Display Station CO Display Stations
-./)
3277 3277 Display Station; MODE operand need BO (local 3270) not be entered
3277B 3277 Display Station; attached in burst BO (local 3270) mode to a mUltiplexor channel.
. MODE operand need not be entered 11·43
DEVICE TYPE CODES I .... Co"t"d)
Device-Card Type
Code Actual IBM Device Xnn Device Type
7710 7770 Audio Response Unit 03 Audio Response Units
7172 7772 Audio Response Unit 04
101'7 1017 Paper Tape Reader 78 Paper Tape Readers
with 2826 Control Unit M.l
1007TP 1017 Paper Tape Reader with 2826 05 Control Unit Model 2
2671 2671 Paper Tape Reader 70
1018 1018 Paper Tape Punch with 2826 79 Paper Tape Punch Control Unit M.l
1018TP 1018 Paper Tape Punch with 2826 06 Control Unit Model 2
FORMAT OF THE ESD CARD Card
Columns
2-4 11-12 15-16 17-72
Multiple punch (12·2·9).
Identifies this as a loader card.
ESO - External Symbol Dictionary carel.
Number of bytes of information contained in this carel.
External symbol identification number (ESID) of the first SO, PC, CM or ER on this card. Relates the SO, PC, eM or ER to a particular control section.
Variable information.
S positions - Name
1 position -Type code hex 00 ,at, 02 ,04 ,05, or OA to indicate SO, LO, ER, PC, CM, or WX respectively.
3 positions - Assembled origin t position - Blank
3 positions - Lenghth, if an SO type, CM type, or a PC type.
If an LO type, this field contains the external symbol identification number (ESIO) of the SO containing the label.
May be used by the programmer for identification.
FORMAT OF THE TXT CARD Card
Columns
Multiple punch (12-2-9).
Identifies this as a loader card.
2-4 TXT - Text card.
6-S Assembled origin (Address of first byte to be loaded from this card).
11-12 Number of bytes of text to be loaded.
~5-16 External symbol identification number (ESIO) of the control section (SO or PCI containing the text.
17-72 Up to 56 bytes of text -data or instructions to be loaded.
73-80 May be used for program identification.
11-44
)
)
FORMAT OF THE RLD CARD Carll
Columns
Multiple punch (12-2-9).
Identifies this as a loader carel.
2-4 RLD - Relocation List Dictionary Card.
11-12 Number of bytes of information contained in this card.
17-72 Variable information (multiple items).
al Two positions' (relocation identifier) pointer to the ESIO number of the ESO item ~ln which the relocation factor of the contents of the address constant is dependent.
b) Two positions· (position identifier) pointer to the ESID number of the ESO item on which the position of the address constant is dependent.
clOne position - flag indicating type of constant, as follows:
Bits 0-2 Ignored
3 0 • a non branch type load constant 1 • a branch type load constant 4-5 00 - load constant length
=
1 byte01 - load constant length = 2 bytes 10 - load constant length = 3 bytes 11 - load constant length = 4 bytes 0- relocation factor is to be added 1 - relocation factor is to be subtracted
0- Next load constant has different Rand P identifiers;
therefore, both Rand P must be present.
1 - Next load constant has the same Rand P identifiers;
therefore they are both omitted.
Five significant bits of this byte are expanded in the RSERV printout.
d) Three positions - assembled origin of load constant.
73-BO May be used for program identification.
FORMAT OF THE END CARD Cam
Columns
Multiple punch 112-2·9).
Identifies this as a loader card.
2-4 END
6-8 Assembled origin of the label supplied to the Assembler in the END card (optional).
15-16 ESID number of the control section to which this END card refers (only if 6-8 present).
17-22 Symbolic label supplied to the Assembler if this label was not defined within the assembly.
Multiple punch (12·2-9).
Identifies this as a loader card.
REP - Replace text card.
Blank.
Assembled address of the first byte to be replaced (hexadecimal).
Must be right justified with leading zero's if needed to fill the field_
Blank
External symbol identification number (E51D) of the control section (5D) containing the text (hexadecimal). Must be right justified with leading zero's if needed to fill the field.
From 1-11 4-digit hexadecimal fields separated by comma's, each replacing two bytes. A blank indicates the end of information in this card.
Blank
May be used for program identification.
1145
I
CHAPTER III
DOSIVSE IDes IGENERALISAM/DAM/ISAMI
I
)
''''--
''--'"
STANDARD VOLUME LABEL, TAPE OR DASD. IBM Standard Volume Lobel Format (SO bytes) for EBCDIC Tape or DASD Field
Co.
Volume label numberI 2 Volum.3 4 Data
5
6 7 B 9Serial FII. Reserved Reserved Owner name Reserved for future expons~on
Number Directory & Address code
VOLUME SECURITY I byte (OS/VS only)
.:::
, !:j ~!:t :;&1 g
DESCRIPTION FIELD NAME AND LEN GTH DESCRIPTION
Must contain VOL to indicate that this is a Volume Lobel.
Indicates the relative position (J-8) of a volume label within a group of volume labels.
A unique identification code which is as-signed to a volume when it enters an in-stallation. This code may also appear on the external surface of the volume for visual identification. It is normally a nu-meric field 000001 to 999999,however any or all of the 6 bytes may be alphanerico Indicates security status of the volume:
0: no further identification for each file of the volume is required.
6 7
1: Further identification for each file of Note:
the volume is required before processing.
DATA FILE DIRECTORY For DASD only. The first 5 bytes contain' 10 bytes the starting address(CCHHR)of the vrOC.
RESERVED
Indicates a specific customer, installation and/or system to which the volume be-longs. This field may be a standardized code,name,address etc.{OS/VS only).
Reserved
All reserved fields should contain blanks to facilitate their use in the future. Any information appearing in these fielck at the present time will be ignored by the DOS/VS and OS/VS programs.