INDICES CLIMATIQUES

Materiais. Anais...Fox do Iguaçu - PR: 2006b

ARMENTANO, I. et al. Multifunctional nanostructured PLA materials for packaging and tissue engineering. Progress in Polymer Science, v. 38, n. 10–11, p. 1720–1747, out. 2013.

BALAKRISHNAN, H. et al. Novel toughened polylactic acid nanocomposite: Mechanical, thermal and morphological properties. Materials and Design, v. 31, n. 7, p. 3289– 3298, 2010.

BAOUZ, T. et al. Effects of mixing protocols on impact modified poly(lactic acid) layered silicate nanocomposites. Journal of Applied Polymer Science, v. 132, n. 8, p. 1–14, 2015.

BARBOSA, R. et al. Efeito de sais quaternários de amônio na organofilização de uma argila Bentonita nacional ( Effect of quaternary ammonium salts on the organophilization of. Cerâmica, v. 52, p. 264–268, 2006.

BARBOSA, R. et al. Preparação de argilas organofílicas e desenvolvimento de nanocompósitos de polietileno. Parte 2: comportamento de inflamabilidade. Polímeros, v. 17, n. 2, p. 104–112, jun. 2007.

BARROS NETO, B. .; SCARMINIO, I. S. .; BRUNS, R. E. Como fazer experimentos: Pesquisa e desenvolvimento na ciência e na indústria. Segunda ed. Campinas: Editora da Unicamp, 2001.

BERGAYA, F.; THENG, B. K. G.; LAGALY, G. Handbook of Clay Science. 1. ed. Amsterdam: Developments in Clay Science, Elsevier Science, 2006.

BHATTACHARYA, M. Polymer nanocomposites-A comparison between carbon nanotubes, graphene, and clay as nanofillersMaterials, 2016.

BOTELHO, K. T. Síntese de Argilas Organofílicas e Sua Incorporação em Polimerização In Situ para a Obtenção De Nanocompósitos Antichamas De Poliestireno. [s.l.] Departamento de Engenharia Química da Universidade Federal de Santa Catarina. Dissertação (Mestrado em Engenharia Química), 2006.

BOUAKAZ, B. S. et al. Synergy between fillers in organomontmorillonite/graphene- PLA nanocomposites. Applied Clay Science, v. 116–117, p. 69–77, 2015.

BREAKWELL, I. K. et al. Studies of organophilic clays: the distribution of quaternary ammonium compounds on clay surfaces and the role of impurities. Polyhedron, v. 14, n. 17–

18, p. 2511–2518, ago. 1995.

BRITISH STANDARDS INSTITUTION. BS ISO 5660-1:2015. Reaction-to-fire tests — Heat release , smoke production and mass loss rate. Part 1 : Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement). p. 66pp, 2015.

BRUNNER, G. Supercritical Fluids as Solvents and Reaction Media. First Edit ed. [s.l.] Elsevier Science, 2004.

CARVALHO, P. J. et al. High carbon dioxide solubilities in

trihexyltetradecylphosphonium-based ionic liquids. The Journal of Supercritical Fluids, v. 52, p. 258–265, 2010.

CASTRO-AGUIRRE, E. et al. Poly(lactic acid)—Mass production, processing, industrial applications, and end of lifeAdvanced Drug Delivery Reviews, 2016.

CHAKRABORTY, S. et al. Stearyl Amine Ethoxylate (SAM) Grafted Montmorillonite Clay-Styrene Butadiene Rubber (SBR) Nanocomposites. International Journal of Polymeric Materials, v. 62, n. 4, p. 220–225, 2013.

CHANG, J. H.; AN, Y. U.; SUR, G. S. Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability. Journal of Polymer Science, Part B: Polymer Physics, v. 41, n. 1, p. 94–103, 2002.

CHANG, L. et al. Preparation and Characterization of a Novel Antibacterial Fiber Modified by Quaternary Phosphonium Salt on the Surface of Polyacrylonitrile Fiber. Fibers and Polymers, v. 15, n. 10, p. 2026–2031, 2014.

CHANG, Y. et al. Ploy (lactic acid)/organo-modified montmorillonite nanocomposites for improved eletret properties. Journal of Electrostatics, v. 80, p. 17–21, 2016.

CHARTOFF, R. P.; SIRCAR, A. K. Thermal Analysis of Polymers. In: Encyclopedia of Polymer Science and Technology. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2004.

CHEN, B.-K. et al. Ductile polylactic acid prepared with ionic liquids. Chemical Engineering Journal, v. 215–216, p. 886–893, jan. 2013.

CHEN, H. et al. Synthesis of montmorillonite/Fe3O4-OTAB composite capable of using as anisotropic nanoparticles. Applied Surface Science, v. 402, p. 384–391, 2017.

CHENG, K.-C. et al. Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay. Carbohydrate Polymers, v. 87, n. 2, p. 1119–1123, jan. 2012.

Quimicamente Modificadas – Uma Revisão. Química Nova, v. 30, n. 5, p. 1282–1294, 2007. CUI, L. et al. Effect of organoclay purity and degradation on nanocomposite performance , Part 1 : Surfactant degradation. Polymer, v. 49, p. 3751–3761, 2008.

DARIE, R. N. et al. Effect of Nanoclay Hydrophilicity on the Poly(lactic acid)/Clay Nanocomposites Properties. Industrial & Engineering Chemistry Research, v. 53, n. 19, p. 7877–7890, 14 maio 2014.

DAVARCIOGLU, B. Kolsuz-Ulukisla-Nigde Clays , Central Anatolian Region – Turkey and Petroleum Exploration. In: VALASKOVA, M.; MARTYNKOVA, G. S. (Eds.). . Clay Minerals in Nature - Their Characterization, Modification and Application. [s.l.] InTech, 2012. p. 39–54.

DOS SANTOS ALMEIDA, A. et al. Development of hybrid nanocomposites based on PLLA and low-field NMR characterization. Polymer Testing, v. 31, n. 2, p. 267–275, abr. 2012.

DU, X. et al. Effect of anionic organoclay with special aggregate structure on the flame retardancy of acrylonitrile–butadiene–styrene/clay composites. Polymer Degradation and Stability, v. 95, n. 4, p. 587–592, abr. 2010.

DUAN, R. et al. Preparation and Characterization of PLLA/OMMT–MAH Nanocomposite by Esterification Method. In: Lecture Notes in Electrical Engineering. [s.l: s.n.]. v. 369p. 785–792.

DUPONT, J. On the Solid , Liquid and Solution Structural Organization of Imidazolium Ionic Liquids. Journal of the Brazilian Chemical Society, v. 15, n. 3, p. 341–350, 2004.

DWECK, J. et al. Partially exchanged organophilic bentonites - Part I. characterization by thermal analysis on calcined mass basis. Journal of Thermal Analysis and Calorimetry, v. 105, p. 907–913, 2011.

FAMBRI, L.; MIGLIARESI, C. Crystallization and Thermal Properties of Poly(Lactic Acid). In: Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications. [s.l: s.n.]. p. 113–124.

FAN, J. et al. Montmorillonite Modified by Cationic and Nonionic Surfactants as High- Performance Fluid-Loss-Control Additive in Oil-Based Drilling Fluids. Journal of Dispersion Science and Technology, v. 36, n. 4, p. 569–576, 2015.

FERNÁNDEZ, M. J.; FERNÁNDEZ, M. D.; ARANBURU, I. Effect of clay surface modification and organoclay purity on microstructure and thermal properties of poly(l-lactic

acid)/vermiculite nanocomposites. Applied Clay Science, v. 80–81, p. 372–381, ago. 2013. FISCAL-LADINO, J. A. et al. Ionic liquids intercalated in montmorillonite as the sorptive phase for the extraction of low-polarity organic compounds from water by rotating- disk sorptive extraction. Analytica Chimica Acta, v. 953, p. 23–31, 2017.

FREITAS, C. A. Nanocompósitos Poliméricos de Poli (Tereftalato de Butileno) - PBT. [s.l.] Escola Politécnica da Universidade de São Paulo, São Paulo-SP. Tese (Doutorado em Engenharia dos Materiais), 2010.

FU, M. et al. Investigation on the co-modification process of montmorillonite by anionic and cationic surfactants. Applied Clay Science, v. 132–133, p. 694–701, 2016.

FUKUSHIMA, K. et al. Effect of clay type and loading on thermal, mechanical properties and biodegradation of poly(lactic acid) nanocomposites. Reactive and Functional Polymers, v. 73, n. 3, 2013.

FUKUSHIMA, Y.; INAGAKI, S. Synthesis of an intercalated compound of montmorillonite and 6-polyamide. Journal of Inclusion Phenomena, v. 5, n. 4, p. 473–482, 1987.

GALVAN, D. et al. Effect of Organoclay Mixture on the Rheological Properties of ABS-Clay Nanocomposites. Macromolecular Symposia, v. 319, n. 1, p. 167–172, 22 set. 2012.

GAMEZ-PEREZ, J. et al. Influence of crystallinity on the fracture toughness of poly(lactic acid)/montmorillonite nanocomposites prepared by twin-screw extrusion. Journal of Applied Polymer Science, v. 120, n. 2, p. 896–905, 15 abr. 2011.

GHERHARDI, B. Thesis of University of Orleans Organisation Multie´chelle et Stabilite´ Colloidale d’argiles Organophiles en Milieu Organique. [s.l: s.n.].

GILES, M. .; HOWDLE, S. . New unsaturated surfactants for the dispersion polymerisation of methyl methacrylate in supercritical carbon dioxide. European Polymer Journal, v. 37, n. 7, p. 1347–1351, jul. 2001.

GUÉGAN, R. Intercalation of a nonionic surfactant (C10E3) bilayer into a Na- montmorillonite clay. Langmuir : the ACS journal of surfaces and colloids, v. 26, n. 24, p. 19175–80, 21 dez. 2010.

GUÉGAN, R. Self-assembly of a non-ionic surfactant onto a clay mineral for the preparation of hybrid layered materials. Soft Matter, v. 9, n. 45, p. 10913, 2013.

organic micro-pollutants? Journal of colloid and interface science, v. 437C, p. 71–79, 28 set. 2014.

GUMUS, S.; OZKOC, G.; AYTAC, A. Plasticized and Unplasticized PLA/Organoclay Nanocomposites: Short- and Long-Term Thermal Properties, Morphology, and Nonisothermal Crystallization Behavior. Journal of Applied Polymer Science, v. 123, p. 2837–2848, 2011.

GUNNING, M. A. et al. The effect of the mixing routes of biodegradable polylactic acid and polyhydroxybutyrate nanocomposites and compatibilised nanocomposites. Journal of Thermoplastic Composite Materials, p. 1–20, 2014.

HA, J. U.; XANTHOS, M. Functionalization of Nanoclays with Ionic Liquids for Polypropylene Composites. Polymer Composites, v. 30, p. 534–542, 2009.

HE, H. et al. Changes in the morphology of organoclays with HDTMA+ surfactant loadingApplied Clay Science, 2006.

HOSSAIN, M. D. et al. Role of water on PMMA/clay nanocomposites synthesized by in situ polymerization in ethanol and supercritical carbon dioxide. Journal of colloid and interface science, v. 336, n. 2, p. 443–8, 15 ago. 2009.

HUANG, Y. et al. Poly(lactic acid)/graphene oxide-ZnO nanocomposite films with good mechanical, dynamic mechanical, anti-UV and antibacterial properties. Journal of Chemical Technology and Biotechnology, v. 90, n. 9, p. 1677–1684, 2015.

ISO178. Plastics - Determination of flexural properties, 2010.

ISO179-1. Plastics - Determination Of Charpy Impact Properties - Part 1: Non- instrumented Impact Test, 2010.

JIA, S. et al. Effects of thermoplastic polyurethane on the properties of poly(lactic acid)/organo-montmorillonite nanocomposites based on novel vane extruder. Polymer Engineering & Science, v. 54, n. 10, p. 2292–2300, out. 2014.

JIANG, G.; HUANG, H.-X.; CHEN, Z.-K. Microstructure and thermal behavior of polylactide/clay nanocomposites melt compounded under supercritical CO2. Advances in Polymer Technology, v. 30, n. 3, p. 174–182, 8 set. 2011.

JIANG, L.; ZHANG, J.; WOLCOTT, M. P. Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanisms. Polymer, v. 48, n. 26, p. 7632–7644, 2007.

JIANXI, Z. H. U. et al. Arrangement models of alkylammonium cations in the interlayer of HDTMA + pillared montmorillonites. Chinese Science Bulletin, v. 48, n. 4, p. 368–372,

2003.

JOLLANDS, M.; GUPTA, R. K. Effect of mixing conditions on mechanical properties of polylactide/montmorillonite clay nanocomposites. Journal of Applied Polymer Science, v. 21, n. 7, p. n/a-n/a, 3 jun. 2010.

K., P.; MOHANTY, S.; NAYAK, S. K. Polylactide/transition metal ion modified montmorillonite nanocomposite-a critical evaluation of mechanical performance and thermal stability. Polymer Composites, v. 33, n. 10, p. 1848–1857, out. 2012.

KACZMAREK, H.; VUKOVIĆ-KWIATKOWSKA, I. Preparation and

characterization of interpenetrating networks based on polyacrylates and poly(lactic acid). Express Polymer Letters, v. 6, n. 1, p. 78–94, 2012.

KHALAF, A. I.; HEGAZY, M. A. Synthesis and characterization of cationic surfactants in the preparation of organobentonite and study their effectiveness on the properties of styrene-butadiene rubber/bentonite composites. High Performance Polymers, v. 25, n. 2, p. 115–125, 14 ago. 2012.

KIM, M.-I. et al. Catalytic performance of montmorillonite clay ion-exchanged with ionic liquids in the cycloaddition of carbon dioxide to allyl glycidyl ether. Catalysis Today, v. 200, p. 24–29, fev. 2013.

KONTOU, E.; GEORGIOPOULOS, P.; NIAOUNAKIS, M. The role of nanofillers on the degradation behavior of polylactic acid. Polymer Composites, v. 33, n. 2, p. 282–294, fev. 2012.

KONTOU, E.; NIAOUNAKIS, M.; GEORGIOPOULOS, P. Comparative study of PLA nanocomposites reinforced with clay and silica nanofillers and their mixtures. Journal of Applied Polymer Science, v. 122, n. 3, p. 1519–1529, 5 nov. 2011.

KOTAL, M.; BHOWMICK, A. K. Polymer nanocomposites from modified clays: Recent advances and challenges. Progress in Polymer Science, v. 51, p. 127–187, 2015.

KRIKORIAN, V.; POCHAN, D. J. Poly (L-Lactic Acid)/Layered Silicate Nanocomposite: Fabrication, Characterization, and Properties. Chemistry of Materials, v. 15, n. 22, p. 4317–4324, 2003a.

KRIKORIAN, V.; POCHAN, D. J. Poly ( L -Lactic Acid )/ Layered Silicate Nanocomposite : Fabrication , Characterization , and Properties. n. 13, p. 4317–4324, 2003b.

LAGALY, G. Interactions of alkylamines with different types of layered compounds. Solid State Ionics, v. 22, p. 43–51., 1986.

LAGALY, G.; GONZALEZ, M. F.; WEISS, A. Problems in Layer-Charge determination of Montmorillonites. Clay Minerals, v. 11, p. 173–187, 1976.

LAI, S. M. et al. Unusual mechanical properties of melt-blended poly(lactic acid) (PLA)/clay nanocomposites. European Polymer Journal, v. 52, n. 1, p. 193–206, 2014.

LEITE, I. F. et al. Efeitos de Diferentes Argilas Organofílicas nas Propriedades de Compósitos PET/Bentonita. Revista Matéria, v. 11, p. 260–266, 2006.

LEU, Y. Y.; MOHD ISHAK, Z. A.; CHOW, W. S. Mechanical, thermal, and morphological properties of injection molded poly(lactic acid)/SEBS-g-MAH/organo- montmorillonite nanocomposites. Journal of Applied Polymer Science, v. 124, n. 2, p. 1200– 1207, 15 abr. 2012.

LI, D.; NEUMANN, A. W. Equation of State for Interfacial Tensions of Solid-Liquid Systems. Advances in Colloid and Interface Science, v. 39, p. 299–345, 1992.

LI, J. et al. Supercritical CO2-assisted synthesis of polystyrene/clay nanocomposites via in situ intercalative polymerization. Journal of Applied Polymer Science, v. 100, n. 1, p. 671– 676, 5 abr. 2006.

LI, L. et al. Dispersion stability of organoclay in octane improved by adding nonionic surfactants. Colloids and Surfaces A: Physicochemical and Engineering Aspects, v. 415, p. 180–186, dez. 2012.

LI, S.; MCCARTHY, S. Influence of crystallinity and stereochemistry on the enzymatic degradation of poly(lactide)s. Macromolecules, v. 32, n. 13, p. 4454–4456, 1999.

LI, Y.; ISHIDA, H. A Differential Scanning Calorimetry Study of the Assembly of Hexadecylamine Molecules in the Nanoscale Confined Space of Silicate Galleries. Chemistry of Materials, v. 14, p. 1398–1404, 2002.

LI, Y.; ISHIDA, H. Concentration-dependent conformation of alkyl tail in the nanoconfined space: Hexadecylamine in the silicate galleries. Langmuir, v. 19, n. 6, p. 2479– 2484, 2003.

LIAO, L. et al. The sequential intercalation of three types of surfactants into sodium montmorillonite. Applied Clay Science, v. 119, p. 82–86, jan. 2016.

LIVI, S. et al. A comparative study on different ionic liquids used as surfactants: Effect on thermal and mechanical properties of high-density polyethylene nanocomposites. Journal of colloid and interface science, v. 349, n. 1, p. 424–33, 1 set. 2010.

liquids: Improvement of thermal stability and mechanical behaviour of high density polyethylene nanocomposites. Journal of colloid and interface science, v. 354, n. 2, p. 555– 62, 15 fev. 2011.

LIVI, S.; DUCHET-RUMEAU, J.; GÉRARD, J.-F. Supercritical CO2-ionic liquid mixtures for modification of organoclays. Journal of colloid and interface science, v. 353, n. 1, p. 225–30, 1 jan. 2011.

LOPES, C. W. et al. Síntese e Caracterização de Argilas Organofílicas Contendo Diferentes Teores do Surfactante Catiônico Brometo de Hexadeciltrimetilamônio. Química Nova, v. 34, n. 7, p. 1152–1156, 2011.

LUO, W. et al. Sequential modification of montmorillonite with dimethyl dioctadecyl ammonium chloride and benzyl octadecyl dimethyl ammonium chloride for removal of perchlorate. Microporous and Mesoporous Materials, v. 233, p. 117–124, 2016.

MA, L. et al. Investigation of structure and thermal stability of surfactant-modified Al- pillared montmorillonite. Journal of Thermal Analysis and Calorimetry, p. 7, 30 abr. 2013.

MAIO, L. DI et al. Effect of Polymer/Organoclay Composition on Morphology and Rheological Properties of Polylactide Nanocomposites. Polymer Composites, v. 36, p. 1135– 1144, 2015.

MANDALIA, T.; BERGAYA, F. Organo clay mineral – melted polyolefin nanocomposites Effect of surfactant / CEC ratio. Journal of Physics and Chemistry of Solids, v. 67, p. 836–845, 2006.

MARRAS, S. I.; ZUBURTIKUDIS, I. Structure and thermal behavior of poly(L-lactic acid) clay nanocomposites: Effect of preparation method as a function of the nanofiller modification level. Journal of Applied Polymer Science, v. 124, n. 4, p. 2999–3006, 15 maio 2012.

MCLAUCHLIN, A.; BAO, X.; ZHAO, F. Organoclay polybutylene terephthalate nanocomposites using dual surfactant modified montmorillonite prepared by the masterbatch method. Applied Clay Science, v. 53, n. 4, p. 749–753, ago. 2011.

MENARD, K. P.; MENARD, N. R. Dynamic Mechanical Analysis in the Analysis of Polymers and Rubbers. [s.l: s.n.].

MESSABEB-OUALI, A. E. L. et al. Physicochemical characterization of organophilic clay. Physics Procedia, v. 2, n. 3, p. 1031–1037, 2009.

poly(lactic acid) in the presence of supercritical carbon dioxide. Journal of Applied Polymer Science, v. 113, n. 5, p. 2920–2932, 5 set. 2009.

MNGOMEZULU, M. E. et al. Review on flammability of biofibres and biocomposites. Carbohydrate polymers, v. 111C, p. 149–182, 13 out. 2014.

MOHAPATRA, A. K.; MOHANTY, S.; NAYAK, S. K. Dynamic mechanical and thermal properties of polylactide-layered silicate nanocomposites. Journal of Thermoplastic Composite Materials, v. 27, n. 5, p. 699–716, 2013.

MOLINARO, S. et al. Effect of nanoclay-type and PLA optical purity on the characteristics of PLA-based nanocomposite films. Journal of Food Engineering, v. 117, n. 1, p. 113–123, 2013.

MUNUSAMY, T.; YA-TING, J.; JIUNN-FWU, L. Enhanced adsorption of inorganic and organic pollutants by amine modified sodium montmorillonite nanosheets. RSC Adv., v. 5, n. 26, p. 20583–20594, 2015.

MURARIU, M.; DUBOIS, P. PLA composites: From production to properties. Advanced Drug Delivery Reviews, v. 107, p. 17–46, 2016.

NAKANISHI, K. et al. Development of poly(L-lactic acid)/organically modified montmorillonite nanocomposites for the fabrication of orthodontic anchoring screws. Journal of Nanoscience and Nanotechnology, v. 16, n. 9, 2016.

NAVEAU, E. et al. Supercritical CO2 as an efficient medium for layered silicate organomodification: Preparation of thermally stable organoclays and dispersion in polyamide 6. Polymer, v. 50, n. 6, p. 1438–1446, mar. 2009.

NETO, B. A. D.; SPENCER, J. The Impressive Chemistry, Applications and Features of Ionic Liquids: Properties, Catalysis & Catalysts and Trends. Sociedade Brasileira de Química, v. 23, n. 6, p. 987–1007, 2012.

NISHIDA, H. Thermal degradation. In: Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications. [s.l: s.n.]. p. 401–412.

NUR-AIMI, M. N.; ANUAR, H. Effect of Plasticizer on Fracture Toughness of Polylactic Acid Reinforced with Kenaf Fibre and Montmorillonite Hybrid Biocomposites. In: Nanoclay Reinforced Polymer Composites. [s.l: s.n.]. p. 263–280.

ORTENZI, M. A. et al. Evaluation of crystallinity and gas barrier properties of films obtained from PLA nanocomposites synthesized via “in situ” polymerization of L-lactide with silane-modified nanosilica and montmorillonite. European Polymer Journal, v. 66, p. 478–

491, 2015.

PAIVA, L. B. Estudo do potencial de bentonitas nacionais e argentinas na obtenção de bentonitas organofílicas em dispersão aquosa e meio semi-sólido visando à aplicação em nanocompósitos poliméricos. [s.l.] Faculdade de Engenharia Química da Universidade Estadual de Campinas, Campinas-SP. Tese (Doutorado em Engenharia Química), 2009.

PAIVA, L. B. et al. Organophilic Bentonites Based on Argentinean and Brazilian Bentonites. Part 2: Potential Evaluation to Obtain Nanocomposites. Brazilian Journal of Chemical Engineering, v. 29, p. 751–762, 2012.

PAIVA, L. B.; MORALES, A. R. Organophilic Bentonites Based on Argentinean and Brazilian Bentonites . Part 1 : Influence of Intrinsic Properties of Sodium Bentonites on the Final Properties of Organophilic Bentonites Prepared By Solid-Liquid and Semisolid Reactions. Brazilian Journal of Chemical Engineering, v. 29, p. 525–536, 2012.

PAIVA, L. B.; MORALES, A. R.; VALENZUELA-DÍAZ, F. R. Argilas organofílicas: características, metodologias de preparação, compostos de intercalação e técnicas de caracterização. Cerâmica, v. 54, n. 330, p. 213–226, jun. 2008a.

PAIVA, L. B.; MORALES, A. R.; VALENZUELA-DÍAZ, F. R. Organoclays: Properties, preparation and applications. Applied Clay Science, v. 42, n. 1–2, p. 8–24, dez. 2008b.

PARK, S. D. et al. Effect of crystallinity and loading-rate on mode i fracture behavior of poly(lactic acid). Polymer, v. 47, n. 4, p. 1357–1363, 2006.

PAUL, D. R.; ROBESON, L. M. Polymer nanotechnology : Nanocomposites. Polymer, v. 49, p. 3187–3204, 2008.

PIRANI, S. I.; KRISHNAMACHARI, P.; HASHAIKEH, R. Optimum loading level of nanoclay in PLA nanocomposites: Impact on the mechanical properties and glass transition temperature. Journal of Thermoplastic Composite Materials, v. 27, n. 11, p. 1461–1478, 2013.

PLUTA, M. et al. Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties. Journal of Polymer Science, Part B: Polymer Physics, v. 44, n. 2, p. 299–311, 2006.

PLUTA, M. Melt Compounding of Polylactide/Organoclay: Structure and Properties of Nanocomposites. Journal of Polymer Science Part B: Polymer physics, v. 44, p. 3392–3405, 2006.

PRAKALATHAN, K.; MOHANTY, S.; NAYAK, S. K. Rheological and thermomechanical behaviour of polylactide/hexadecyl trimethyl ammonium-modified layered silicate nanocomposites. Journal of Thermoplastic Composite Materials, v. 27, n. 10, p. 1303–1320, 2014.

SACCHETIN, P. S. C. Produção de Micropartículas Poliméricas por Tecnologia de Fluidos Supercríticos para Aplicação como Veículo na Administração Oral de 17 Α - Metiltestosterona para Tilápias do Nilo. [s.l.] Faculdade de Engenharia Química da Universidade Estadual de Campinas, Campinas-SP. Tese (Doutorado em Engenharia Química), 2012.

SALEHIYAN, R. et al. Polylactic acid/polycaprolactone nanocomposite: Influence of montmorillonite and impact modifier on mechanical, thermal, and morphological properties. Journal of Elastomers and Plastics, v. 47, n. 1, p. 69–87, 2015.

SANTOS, P. DE S. Ciência e Tecnologia de Argilas. 2. ed. São Paulo: Edgard Blucher, 1989.

SARKAR, B. et al. Structural characterisation of Arquad® 2HT-75 organobentonites: surface charge characteristics and environmental application. Journal of hazardous materials, v. 195, p. 155–61, 15 nov. 2011.

SARKAR, B. et al. Toxicity of organoclays to microbial processes and earthworm survival in soils. Journal of hazardous materials, p. 1–8, 5 dez. 2012.

SHABANIAN, M. et al. New ternary PLA/organoclay-hydrogel nanocomposites: Design, preparation and study on thermal, combustion and mechanical properties. Materials & Design, v. 110, p. 811–820, 2016.

SHAH, K. J. et al. Effect of organic modifiers on dispersion of organoclay in polymer nanocomposites to improve mechanical properties. Polymer (United Kingdom), 2016.

SHAH, L. A. et al. Characterization of Pakistani purified bentonite suitable for possible pharmaceutical application. Applied Clay Science, v. 83–84, p. 50–55, out. 2013.

SHEN, Y. H. Preparations of organobentonite using nonionic surfactants. Chemosphere, v. 44, n. 5, p. 989–995, 2001.

SILVA, A. A. et al. Preparação de argilas organofílicas usando diferentes concentrações de sal quaternário de amônio ( Preparation of organophilic clays using different. Cerâmica, v. 53, p. 417–422, 2007.

organic-based drilling fluids. Applied Clay Science, v. 95, p. 371–377, 2014.

SILVA, I. A. et al. Organofilização de argilas bentoníticas com tensoativos não- iônicos visando seu uso em fluidos de perfuração base óleo. Cerâmica, v. 58, p. 317–327, 2012.

SILVA, M. L. et al. Effect of Clay / Water Ratio During Bentonite Clay Organophilization on the Characteristics of the Organobentonites and Its Polypropylene Nanocomposites. Spectroscopy, 2009.

SILVA, A. R. V; FERREIRA, H. C. Esmectitas organofílicas: conceitos, estruturas, propriedades, síntese, usos industriais e produtores/fornecedores nacionais e internacionais. Revista Eletrônica de Materiais e Processos, v. 3, p. 01–11, 2008.

SINHA RAY, S. et al. New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties. Macromolecules, v. 35, n. 8, p. 3104–3110, 2002a.

SINHA RAY, S. et al. New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology. Polymer, v. 44, n. 3, p. 857–866, 2002b.

SINHA RAY, S. et al. New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties. Polymer, v. 44, p. 6633–6646, 2003.

SINHA RAY, S.; OKAMOTO, M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Progress in Polymer Science, v. 28, n. 11, p. 1539–1641, nov. 2003.

SOLOMONS, T. W. G.; FRYHLE, L. B. Química Orgânica. 7. ed. Rio de Janeiro: LTC Editora, 2001.

SONG, Y.-P. et al. A method for simultaneously improving the flame retardancy and toughness of PLA. Polymers for Advanced Technologies, v. 22, n. 12, p. 2295–2301, 15 dez. 2011.

SOUZA, P. M. S. Estudo da Influência de Argilas Organofílicas no Processo de Biodegradação de Nanocompósitos de PLA e seus Efeitos Genotóxicos e Mutagênicos. [s.l.] Faculdade de Engenharia Química da Universidade Estadual de Campinas, Campinas-SP. Dissertação (Mestrado em Engenharia Química), 2013.

SOUZA, P. M. S. et al. PLA and Montmorilonite Nanocomposites: Properties, Biodegradation and Potential Toxicity. Journal of Polymers and the Environment, 5 maio 2013.

polylactide upon cold-drawing. Polymer (United Kingdom), v. 55, n. 7, p. 1817–1828, 2014. TEIXEIRA-NETO, É.; TEIXEIRA-NETO, Â. LBUQUERQUE. Modificação Química de Argilas: Desafios Científicos e Tecnológicos para Obtenção de Novos Produtos com Maior Valor Agregado. Química Nova, v. 32, n. 3, p. 809–817, 2009.

THOMPSON, M. R. et al. Interaction of supercritical CO2 with alkyl-ammonium organoclays: changes in morphology. Journal of colloid and interface science, v. 324, n. 1– 2, p. 177–84, ago. 2008.

URBANCZYK, L. et al. Synthesis of polylactide/clay nanocomposites by in situ intercalative polymerization in supercritical carbon dioxide. European Polymer Journal, v. 45, n. 3, p. 643–648, mar. 2009.

UTRACKI, L. A. Clay-Containing Polymeric Nanocomposites. 1. ed. United Kingdom: Rapra Technology Limited, 2004. v. 1

UTRACKI, L. A. et al. Clays for Polymeric Nanocomposites. Polymer Engineering And Science, v. 51, p. 559–572, 2011.

VAN KREVELEN, D. W.; TE NIJENHUIS, K. Cohesive Properties and Solubility. In: Properties of polymers. Fourth ed. Amsterdam: Elsevier B.V., 2009. v. Unicop. 189–227.

VATANSEVER, A. et al. Effect of organic modifier type of montmorillonite on the poly (butyl acrylate-co-methyl methacrylate)/montmorillonite nanocomposite. Polymer Bulletin, v. 73, n. 4, p. 909–925, 2016.

VEISKARAMI, M.; SARVI, M. N.; MOKHTARI, A. R. Influence of the purity of montmorillonite on its surface modification with an alkyl-ammonium salt. Applied Clay Science, v. 120, p. 111–120, 2016.

VENKATARAMAN, N. V.; VASUDEVAN, S. Characterization of Alkyl Chain Conformation in an Intercalated Cationic Lipid Bilayer by IR Spectroscopy. The Journal of Physical Chemistry B, v. 106, n. 32, p. 7766–7773, 2002.

WEI, P.; BOCCHINI, S.; CAMINO, G. Nanocomposites combustion peculiarities. A case history: Polylactide-clays. European Polymer Journal, v. 49, n. 4, p. 932–939, abr. 2013.

WOKADALA, O. C. et al. Morphology, thermal properties and crystallization kinetics of ternary blends of the polylactide and starch biopolymers and nanoclay: The role of nanoclay

Dans le document INDICATEURS DU DEVELOPPEMENT HUMAIN DURABLE ANNEE 2015 (Page 117-122)