• Aucun résultat trouvé

page document describes the steps necessary to modify the Lease vs. Purchase Analysis of·Capital

Dans le document IBM System/360 and System/370 (Page 138-146)

PTF PROGRAM NUMBER 360S-AL-531 PTF PROGRAM NUMBER 360S-AS-037

This 36 page document describes the steps necessary to modify the Lease vs. Purchase Analysis of·Capital

Expenditures FDP written in FORTRAN IBM for the System/360.

This program is designed to simulate different approaches to capital acquisition by applying a variety of depreciation methods, tax credits, financingw lease prices, etc.

This systems guide provides the Systems Analyst with the necessary information on the design, logiC and coding of the system to enable ~im to make modifications, diagnose program errors and perform program maintenance.

Guide. 36 pages GB21-0553

OPERATOR TRAINING - DOS CONSOLE SIMULATION DRILLS: BASIC·

TRAINING COURSE A3609 (PROG. NO. 5798-AJM), CuSTOMER PROBLEM DETERMINATION COURSE A3611 (PROG. NO. 5798-AJN),

AND PROGRAMMING COURSE A3612 (PROG. NO. 5798-AJP) IT ELOPED PROGRAiiS-AV~nmLffiNoTICE

The ability notice is a marketing oriented document that describes the purpose and capabilities of the program, advantages of design. and problems

DEScRIPTION/OPERATIONS MANUAL - PROGRAM NUMBER 5798-AJM This 28 page document describes the capabilities of the FDP and the programs of the DOS Basic Operator Training system.

Written in the Coursewriter III LaDguage, this Console Simulation Drill provides the student with simulated hands-on experience but chands-ontrols the student activity, thus protecting vital system and user files.

. This Program Description/Operations Manual provides the user.with sufficient information to understand, install and succeSSfully use the program.

Manual. 28 pages Coursewriter III Language. Tbis Console Simulation Drill provides the student with simulated hands-on experience but

SB21

controls the student activity. thus protecting vital system and user· files.

This systems guide provides the Systems Analyst with the necessary information on the design. logic and coding of the system to enable him to make modifications. diagnose program errors and perform program maintenance.

Guide. 50 pages 5821-0557

,~~)

capabilities of the FDP and the programs of the DOS COstomer Problem Determination Operator Training system. Written in the Coursewriter III Language. this Console Simulation Drill provides the student with simulated hands-on experience but controls the student activity. thus protecting vital System and user files.

This Program DescriptiOn/Operations Manual provides the user with sufficient information to understand, install and successfully use the program.

Manual. 28 pages LB21-0558

DOS CUSTOMER PROBLEM DETERMINATION OPERATOR TR~INING

FIEGD DEVELOPED PROGRAM Si~EMS GUIDE - PROGRAM NUMBER

5798-AJN

-This 80 page document describes the steps necessary to modify the DOS Customer Problem Determination Operator Training FDP written in the Coursewriter III Language. This Console Simulation Drill provides the student with simulated hands-on experience but controls the stndent activity. thus protecting vital system and user files.

This systems guide provides the Systems Analyst with the necessary information on the design. logic and coding of the system to enable him to make modifications. diagnose program errors and perform program maintenance.

Guide, 80 pages S821-0560

~~~~~~~~~~~- FIELD DEVELOPED

n' MANUAL

the capabilities of the FDP and.the programs of the DOS Multiprogramming Operator Training system. Written in the Coursewriter III Language, this Console Simulation Drill provides the student with simulated hands-on experienoe but controls the student activity. thus protecting vital system and user files.

This Program Description/operations Manual provides the user with SUfficient infor.mation to understand. install and successfully use the program.

Manual, 26 pages LB21-0561

DOS MULTIPRO FIELD DEVELOP

Th1S:56 page ocument describes the steps necessary to modify the DOS Multiprogra~ing Operator Training FDP written in the coursewriter III Language. This Console Simulation Drill provides the student with simulated hands-on experience but chands-ontrols the student activity. thus protecting vital system and user files.

This systems guide provides the Systems Analyst with the necessary information on the design. logic and coding of the system to enable him to make modifications. diagnose program errors and perform program maintenance.

Guide. 56 pages GB21-05711

05/360/370 JOB CONTROL LANGU~GE DEVICE DEPENDENT PARAMETER CONVERSION AND REPLiCEMENT (DDPREP) AVAILABILITY NOTICE

FDP NUMBER rn8-AJU - - - -

-This four page document describes the purpose and. highlights of the OS/360/370 Job Control Language - Device Dependent Parameter Conversion and Replacement (DDPREP) program for tbe System 360/370. Written in PL/1. this program converts production Job Control Language and procedure libraries to accommodate new I/O Device characteristics and data set locations.

This Availability Notice contains complete ordering instructions for the Field Developed Program and all its related documentation, for management and data processing personnel who are prospective users of the program and others who require information concerning it.

Notice, 4 pages -Device Dependent Parameter Conversion and Replacement

(DDPREp·) system. Written in PL/1 ·for the System 360/370.

this system converts production Job Control Language and procedure libraries to accommodate new I/O Device characteristics and data set locations.

132

SB21

This program Description/Operations Manual. provides the user with sufficient information to understand. install and successfuLly use the program.

Manua1, qq pages LB21-0576

05/360/370 JOB CONTROL LANGUAGE DEVICE DEPENDENT PARAMETER CONVERSION AND ~EMENT (DDPR~SYSTEMS GUIDE - FDP

NUMBER 5798=iiJU

-This 32 page document describes the steps necessary to modify the 05/360/370 Job Contr01 Language - Device Dependent Parameter Conversion and Replacement (DDPREP) FDP written in PL/1 for the System 360/370. This program converts production Job Control Language and procedure libraries to accommodate new I/O device characteristics and data set 10cations.

This systems guide provides the systems Analyst with the necessary information on the design. logic and coding of the system to enable him to make modifications. diagnose program errors and perform program maintenance.

Guide, 32 pages

GB21-0610 *N

2927 TAPE TO PRINTER UTILITY FOR SYSTEM/360. 370 iVA"ILA"""'iiiL:xTi NOTICE - """'FiiPiiiiMBER5798-AKH

This q page document-describes the purpose and high1ights of

"2927 Tape to Printer Uti1ity". Written in Assemb1er, this program wi11 enab1e the user to print formatted print tapes on the IBM 2927 Tape-to-Printer with a minimum amount of communication with the operator. Uses BPS to provide control. interrupt. input-output and I/O error recovery functions necessary for program execution.

This Avai1ability Notice contains comp1ete ordering instructions for the Field Developed program and all its related documentation, for management and data processing personne1 who are prospective users of the program and others who require information concerning it.

Notice, " pages recovery functions necessary for program execution.

This Program Description/Operations Manua1 provides the user with sufficient information to understand. install and successful1y use the program.

Manual., 50 pages recovery functions necessary for program execution.

This systems guide provides the Systems Ana1yst with the necessary information on the design, logic and coding of the system to enab1e him to make modifications, diagnose program errors and perform program maintenance.

Guide, 22 pages GB21-0620

3270 FORMAT MACRO FOR OUTPUT DATA STREAMS PDP - AVAILABILITY NOTICE="PRo'GRii'M NUMBER'"579iiiiiL"

-This four page document describes the purpose and highlights

This Avai1ability Notice contains comp1ete ordering instructions for the Field Developed program and al1 its related documentation, for management and data processing personnel who are prospective users of the program and others who require information concering it.

Notice, " pages

This Program Description/Operations Manua1 provides the user with sufficient information to understand, install and successfu11y use the program.

Program Description/Operations Manua1, 62 pages LB21-0622 errors and perform program maintenance.

Systems Guide, 10 pages

GB21-0635 .N

:~~~ES:A~~;T~~:B:! ~~OR SYSTEM/360, ~ AVAILABILITY This 2 page-aacument describes the purpose and high1ights of the Error statistics By Vo1ume for the System/360, 370.

Written in PL/1, this program, using standard SMF data as input, produces Error Statistics Reports that enab1e the tape user to monitor the qua1ity of his tape library,

This Avai1abi1ity Notice contains complete ordering instructions for the Fie1d Deve10ped Program and al1 its related documentation, for management and data processing personne1 wbo are prospective users of the program and others who require information concerning it.

Notice, 2 pages

SB21-0636 *N

ERROR STATISTICS BY VOLUME !Q!! SYSTEM/360, 370 PROGRAM DESCRIPTION/OPERATIONS MANUAL - FDP NUMBER 5798-AKR This 25 page document descr~bes the capabilities of the FOP performance with the hardware. The ESV Reporter operates under either OS MFT or MVT and requires a 130B

partitiOn/region and 50 cy1inders of IBM 231q direct access storage (or equiva1ent).

This program Descr~ption/operations Manual provide~ the user with sufficient information to understand, insta11 and successfu11y use the program.

Manual, 25 pages errors and perform program maintenance.

Guide, 16 pages

GB21-0638 *N

DATA EDITING AND FORMATTING AIDS FOR SYSTEM/360 AVAILABILITY NOTICE"'=Fi5P NUMBER 5798AXS

-Thisq page-document descr1bes the purpose and high1ights of Data Editing and Formatting Aids for the System/360.

Written in ALe, this FDP consists of 26 assembler macros providing thirty-one unique functions for text editing and reformatting. The program was deve10ped using the macro facility present in both the DOS and the OS assemb1er 1anguages. The macros are identica1 in function under both OS and DOS.

This Availabi1ity Notice contains comp1ete ordering instructions for the Fie1d Deve10ped Program and a11 its re1ated documentation, for management and data processing personne1 who are prospective users of the program and others who require information concerning it.

Notice, " pages

SB21

SB21-0639 *N

1I~~~~~!p:!~~~~r~~m~lH~~

and Pormatting Aids. the PDP Written in ALe for the System/360, this system consists of 26 assembler macros providing ·thirty-one unique functions for text editing and reformatting. The program was deve10ped using the macro facility present in both the DOS and the OS Assembler languages. The macros are identical in function under both OS and DOS.

This Program Description/Operations Manual provide~ the user with sufficient information to understand, install and successfu11y use the program.

Manua1, 77 pages LB2l-0640 see page 330

GB21-0671 *N

DOS/OS 3735 COMMUNICATIONS ~ ~ SYSTEM/360,370 AVAILABILITY NOTICE - PDP NUMBER 5798-ALG

This 4 page d~t-descr~he ·purpose and highlights of this DOS/OS 3735 Communications Utility for the Systeml360, 370. Written in ALe, this FOP provides a comprehensive set of options designed to establish communications between the host System/360 or Systeml370 and the IBM 3735 Programmable Buffered Terminal. With this PDP, the host system calls the termina1-using the autoca11 feature on the Transmission Control Unit-collects data from the terminal and sends se1ected Form Description Programs and data to the terminal.

The FOP is run as a batch job under either DOS or OS.

Through utility control statements, this FDP provides many options.sucb as terminal 10 verifications. data collection on disk or printer, transmission of all or selected form description programs, transmission of selected groups of data to the terminal and many others. Data reoeived from the IBM 3735 can·be written onto a sequential disk for later processing.by user programs. Data to be selected and sent to the 3735 is located in an indexed sequential file built by the user according to 3735 specifications.

This Availability Notice contains complete ordering instructions for the Pield Developed Program and all its re1ated documentation, for management and data processing personnel who are prospective users of the program and others who reqUire information concerning it.

Notice, II pages

SB21-0672 *N

DOS/OS COMMUNICATIONS ~!QS SYSTEM/360,370

=

PROGRAM

DESCRIPTION/OPERATIONS MANUAL - FDP NUMBER 5798-ALG This 30 page document describes the capabilities of the PDP and the programs of the DOS/OS communications utility.

Written in ALe for the System/360.370, this FDP provides a comprehensive set of options "designed to establish

communications between the host Systeml360 or systeml370 and the IBM 3735 Programmable Buffered Terminal. With this FDP, the host system calls the terminal-using the autocall feature on the Transmission Control Unit-collects data from the terminal and sends selected Form Description Programs and data to the terminal. The FDP is run as a batch job under either DOS or

os.

Through utility control statements, this PDP provides many options such.as terminal ID

verifications, data collection on disk or printer, transmission of a11 or se1ected.form description programs, transmission of selected groups of data to the terminal and many others. Data received from the IBM 3735 can he written onto a sequential disk for later prOcessing by user

programs. Data to be selected ~and sent to the 3735 is located in an indexed sequential file built by the user according to 3735 specifications.

This Program Description/Operations Manual provides the user With sufficient information to understand, install and successfully use the program •.

Manual, 30 pages

LB21-0673 *N

~ COMMUNICATIONS UTILITY lQg SYSTEM/360,370 SYSTEMS GUIDE - PDP NUMBER 5798-ALG

This iii page doC'Wiient describes the steps necessary to modify the DOS/OS 3735 Communications Utility written in ALe for the System/360,370. This PDP provides a comprehensive set of options designed.to establish communications between the host System/360 or System/370 and the IBM 3735

Programmable Buffered Terminal. liith this PDP, the host system calls the terminal-using the autoca1l feature on the Transmission Control Unit-collects data from the terminal and sends· selected Porm DescriPtion Programs and data to the terroina1. The FDP is run as a· batch job under either DOS or OS. Through utility control statements, this PDP provides many options such as termina1 Iii. verification, data collection On disk printer, tranSmission of all or selected form description programs, transmission of selected groups of data to the terminal and many others. Data received from errors and perform program maintenance.

Guide, 14 pages

LB21 GB21-0686

DOS 2311/14/19 - 3330 DASD DEVICE INDEPENDENCE ROUTINES ffilLABILITY NoTlCi!= PDP NiiMiiiiiI5798-ALII

This 2 page document-describes the purpose and highlights of tbe DOS 2311/14/19-3330 DASD Device Independence Routines program for the System/360/370 (DOS). Written in Assembler Language, this program provides the DOS user device independence between 2311/14/19 and 3330 disk files. These routines dynamically modify (at OPEN time) any program written in any language that uses Index Sequential.

Sequential, Direct Access, or PIOCS in a standard manner.

This Availability Notice contains complete ordering instructions for the Pield Developed Program and all its related documentation, for management and data processing personnel who are prospective users of the program and others who require information concerning it.

Notice, 2 pages

and the programs of the DOS 2311/14/19-3330 DASD Device Independence Routines system. Written in Assembler Language for the System 360/370 (DOSI, this system provides the DOS user device independence between 2311/14/19 and 3330 disk files. These routines dynamically modify (at OPEN time) any program written in any·1anguBge that uses Index sequential, Sequential. Direct Access, or Ploes in a standard manner.

This Program Description/Operations Manual provides the user with sufficient information to understand, install and successfully use the program.

Manua1, 24 pages LB21-0688

DOS 2311/14/19-3330 DASO DEVICE INDEPENDENCE ROUTINES SYSlrEMS GUIDE - PDP 'NuiiiiER5'i98-ALK

This 98 page-docUDIent:deSCribes the steps necessary to modify the DOS 2311/14/19-3330 DASD Device Independence Routines PDP written in Assembler Language for the System 360/370 (DOS). This program provides the DOS user device independence between 2311/14/19 and 3330 disk files. These routines dynamically modify (at OPEN time) any program written in any language that uses Index Sequential, Sequent.ial, Direct Access, or PIOCS in a standard manner.

This systems guide provides ths Systems Analyst with the necessary information on the design, logic and coding of the system to enable him to'make modifications, diagnose program errors and perform program mainteDance.

Guide, 98 pages

GB21-0704 *N

BURROUGBS 100/200/300/500 BASIC ASSEMBLER LANGUAGE TO IBM DOS ALC CONVERSION AID FORliYSTEM/360, 370 AVALLABIL'ITY NOTICE - PDP NUMBER 5798-AMC

~ page-document describes the·purpose and highlights of Burroughs 100/200/300/500 Basic Assembler Language to IBM DOS ALC conversion Aid for the System/360, 370. liritten in ALC this program assists in the conversion of Burroughs 100/200/300/500 Series Basic Assembly Language programs to IBM DOS Assembler LangUage. There are three phases in the conversion process: language translation. manual editing of-intermediate output and correction of diagnostiCS, DOS Assembly. The translation system operates. on a System/360

(model 22 or above) or System/370 under DOS. A minimum partition of 14 bytes is required.·

This Availability. Notice contains complete ordering instruction for the Field Developed Program and all its related documentation, for management and data processing personnel who are prospective users of the program and others who required information concerning it.

Flyer, 4 pages:'

SB21-0705 *N

BURROUGHS 100/200/300/500 BASIC ASSEMBLER· LANGUAGE TO IBM DOS ALC CONVERSION AID FOR-sYSTEM/360, 370 ~ DESCRIPTION/OPERATIONS MANUAL - PDP NUMBER 5798-AMC This 56 page document describes the capabilities of the FDP and the programs of the Burroughs 100/200/300/500 Series Basic Assembly Language programs·to IBM DOS Assembler Language. There are three phases in the conversion process:

language translation, manual editing of intermediate output and correction of diagnostics, DOS Assembly. The

translation system oPerates on a System/360 (model 22 or above) or Systeml370.under DOS. A minimum partition of 14K

bytes is required. .

This Program.Description/Operations Manual provides the user with sufficient information. to understand, install and successfully use the program. .

Manual, 56 pages

LB21-0706 *N

BURROUGHS 100/200/300/500 BASIC ASSEMBLER LANGUAGE TO IBM DOS ALC CO !!!! FOR--sYS"TEM/360, 370 ~ GUIDE FDP NUMBER AMC

This 16 page cument descr·ibes the steps necessary to modify the Burroughs 100/200/300/500 Basic Assembler Language to IBM DOS ALe Conversion Aid written in ALe Conversion Aid for the system/360'370~. This program assists

134

LB21

in the conversion of Burroughs 100/200/300/500 Basic Assembier Language to IBM DOS Assembier Language. There are three phases in the conversion process: language

transiation, manual editing of intermediate output and correction of diagnostics, DOS Assemo~y. The translation system operates on a system/360 (model 22 or above) or errors and perform program maintenance.

Guide, 16 pages

GB21-073Q .N

ARITHMETIC PROFICIENCY TRAINING PROGRAM USING SYSTEM/360 FOR SYSTEK/360, 370 AVAILABILITY NOTICE

=

FDP NUMBER 5798-ALY-This 6 page document describes the purpose and highiights of Arithmetic Proficiency Training program Using system/360 for System/360, 370. Written in Coursewriter III and Assembler Language and operating on System/360, 370, this program is a computerized test-and-practice program designed to assist the student in improving his computationai skiiis in the basic operations on whale numbers, fractions, mixed numbers, decimals and percents. By interpersed diagnostic testing.

i t directs a student to practice oniy those skiiis in which he is judged deficient. The program covers five skill areas of arithmetic and inciude twenty-nine sets of skiiis caiied molecuies. Statistics on the student·'s progress are. kept for teacher review.

This Availability Notice contains complete ordering instructions for the Fieid Deveioped Program ~d aii its related documentation. for management and data processing personnei who are prospective users of the program and others who reqUire information concerning it.

Notice. 6 pages

SB21-0735

1I1!1I~tI~~I:::::::

describes the capabiiities of the

·N

Arithmetic Proficiency Training program Using system/360, 370. Written in Coursewritter III and Assemb1er Language.

is a computerized test-and-practice program designed to assist the student in improving his computationai skiiis in the basic operations on whole numbers, fractions, mixed numbers, decimais and percents. BY interpersed diagnostic testing, i t directs a student to practice oniy those skiiis in which he is judged deficient. The program covers five skiii areas of arithmetic and inciude twenty-nine sets of ski1is cailed·moiecuies. statistics on the student's pr9gress are kept for teacher review.

This Program Description/operations Manuai provides the user with sufficient information to understand, i~stall and successfuiiy use the program.

Manuai, 155 pages

LB21-0736 .N

ARITHMETIC PROFICIENCY TRAINING PROGRAM USING SYSTEM/360, 370 SYSTEMS GUIDE - FDP NUMBER 5798-ALY

This 105 page docuiiieiit"desCrIbes the steps necessary to mOdify the Arithmetic Proficiency Training Program Using System/360, 370 written in Coursewritter I I I and Assembler Language. This program is a computerized test-and-practice

This 105 page docuiiieiit"desCrIbes the steps necessary to mOdify the Arithmetic Proficiency Training Program Using System/360, 370 written in Coursewritter I I I and Assembler Language. This program is a computerized test-and-practice

Dans le document IBM System/360 and System/370 (Page 138-146)