• Aucun résultat trouvé

[PDF] Top 20 A simple approach for the design of steel and composite sway building frames

Has 10000 "A simple approach for the design of steel and composite sway building frames" found on our website. Below are the top 20 most common "A simple approach for the design of steel and composite sway building frames".

A simple approach for the design of steel and composite sway building frames

A simple approach for the design of steel and composite sway building frames

... that the loss in strength due to second-order effects, when compared to first-order plastic collapse load (figure 8), amounts approximately: ...6%. Of course the number of plastic hinges that ... Voir le document complet

37

Steel and composite building frames: sway response under conventional loading and developmet of membrane effects in beams further to an exceptional action

Steel and composite building frames: sway response under conventional loading and developmet of membrane effects in beams further to an exceptional action

... software. The reference structure for the benchmark study is a 3-D braced composite building composed of two main frames (Figure ...both the detailed data ... Voir le document complet

320

CIRCULAR TUBE COLUMNS IN HIGH STRENGTH STEEL: Economical solutions for building frames

CIRCULAR TUBE COLUMNS IN HIGH STRENGTH STEEL: Economical solutions for building frames

... DOMAIN OF INTEREST FOR HIGH STRENGTH STEEL A global comparison between solutions for steel and composite tubular columns using high strength steel (HSS) or ... Voir le document complet

6

Stability of non-sway steel frames with semi-rigid connections

Stability of non-sway steel frames with semi-rigid connections

... Buckling of a column is fundamental to the design of load bearing structures mainly when the analysis of such frames takes into account the effect of ... Voir le document complet

8

Seismic Design and Performance of Composite Frames

Seismic Design and Performance of Composite Frames

... in the analyses is a nonlinear concrete model with constant (active) confinement modelling ...("con2"). The model of Mander et al. (1998) has a good balance between simplicity ... Voir le document complet

23

Recent investigations on composite sway frames

Recent investigations on composite sway frames

... Abstract: A modern design code for composite construction such as Eurocode 4 limits its scope to “non-sway buildings” with efficient bracing ...analyse and to check structural ... Voir le document complet

9

Composite joints in robust building frames

Composite joints in robust building frames

... that a structure should fulfil in addition to those directly resulting from the normal design process and which would provide robustness to the structure, ...locally the ... Voir le document complet

12

Robustness of steel and composite buildings suffering the dynamic loss of a column

Robustness of steel and composite buildings suffering the dynamic loss of a column

... ROBUSTNESS OF STEEL AND COMPOSITE BUILDINGS SUFFERING THE DYNAMIC LOSS OF A COLUMN Abstract In case a vehicle impacts a building frame, one or several ... Voir le document complet

14

Seismic Design and Qualification of All-Steel Buckling-Restrained Braced Frames for Canadian Applications

Seismic Design and Qualification of All-Steel Buckling-Restrained Braced Frames for Canadian Applications

... most of the conventional ground motion selection schemes such as ATC-58 (Haselton, 2009; ATC, ...to a high scatter and bias in the computed demand because all of the ... Voir le document complet

439

Applicability of Composite Sway Structures to Sway Frames

Applicability of Composite Sway Structures to Sway Frames

... Composite sway structures are prone to global instability phenomena and to second-order effects; the latter have to be predicted carefully because they may govern the ...source ... Voir le document complet

118

Contribution to the design of sway composite frames

Contribution to the design of sway composite frames

... 2001], the scope of the MMR formula has been extended to structures with semi-rigid and/or partial-strength joints and its applicability to composite structures is ... Voir le document complet

11

Design of composite sway building frames for global instability

Design of composite sway building frames for global instability

... Headings: composite structures, sway frames, numerical analysis, structural stability, structural ...is the European design code for composite construction ; in its ... Voir le document complet

47

The bag-of-frames approach: a not so sufficient model for urban soundscapes

The bag-of-frames approach: a not so sufficient model for urban soundscapes

... information for soundscape categorization is preserved in their summary statistics, this information by no means allows a sufficient level of generalization to handle categories with strong intrinsic ... Voir le document complet

13

A graph-based approach for the structural analysis of road and building layouts

A graph-based approach for the structural analysis of road and building layouts

... A better understanding of the relationship between the structure and functions of urban and suburban spaces is one of the avenues of research still ... Voir le document complet

16

A Two-Step Optimization Approach for Composite Structures Optimization Including Design Rules and Manufacturing Constraints

A Two-Step Optimization Approach for Composite Structures Optimization Including Design Rules and Manufacturing Constraints

... case and on a fuselage section made of a curved panel including several hat stiffeners defining zones of different material ...linear and non-linear finite element analysis ... Voir le document complet

1

Behaviour of steel frames under fire conditions

Behaviour of steel frames under fire conditions

... beams, and this was found to increase to 60 min in unprotected shelf-angle floor ...beams. The results from a series of tests performed to establish the moment–rotation curves ... Voir le document complet

13

Contribution to the derivation of robustness requirements for steel and composite structures

Contribution to the derivation of robustness requirements for steel and composite structures

... define the substructure properties, an “actual” composite building has been first designed (Demonceau and Jaspart, 2006a) according to Eurocode 4 (NBN EN 1994-1-1, 2005), so under “normal” ... Voir le document complet

6

Robustness of building frames further to a column loss - Substructure approach with account of dynamic effects

Robustness of building frames further to a column loss - Substructure approach with account of dynamic effects

... In the present paper, the whole analytical procedure is applied to a particular ...First, the static response is determined. Then the proposed model is used to predict the ... Voir le document complet

6

Seismic Performance of Concentrically Braced Steel Frames of the Conventional Construction Category

Seismic Performance of Concentrically Braced Steel Frames of the Conventional Construction Category

... as a ductile ...using the amplified seismic loads. Analysis of an 8-storey CC Type braced steel frame in Victoria, BC, showed extensive brace buckling and tensile yielding, as well as ... Voir le document complet

310

COMBRI Design Manual - Part I: Application of Eurocode rules - Part II: State-of-the-Art and Conceptual Design of Steel and Composite Bridges

COMBRI Design Manual - Part I: Application of Eurocode rules - Part II: State-of-the-Art and Conceptual Design of Steel and Composite Bridges

... Introduction and scope 1.1 Introduction In the COMBRI research project [7], in which this design manual has its origin, the different national background of each partner how to apply ... Voir le document complet

296

Show all 10000 documents...