• Aucun résultat trouvé

perovskite solar cell

Modeling the perovskite solar cell and the ion migration with physical approach based on FEM from Silvaco

Modeling the perovskite solar cell and the ion migration with physical approach based on FEM from Silvaco

... the perovskite solar cell and the ion migration with physical approach based on FEM from Silvaco Jihye Baik 1 , Haeyeon Jun 1,2 , Hindia Nahdi 1,3 , Bernard Geffroy 1,4 , Denis Tondlier 1 and Yvan ...

2

Evidence of halide ion migration in CH$_3$NH$_3$PbI$_3$(Cl) based perovskite solar cell and its effect on current-voltage hysteresis

Evidence of halide ion migration in CH$_3$NH$_3$PbI$_3$(Cl) based perovskite solar cell and its effect on current-voltage hysteresis

... based perovskite solar cell and its effect on current-voltage hysteresis Heejae Lee a , Sofia Gaiaschi b , Patrick Chapon b , Arthur Marronnier a , Denis Tondelier a , Yvan Bonnassieux b , Jean-Eric ...

2

Observation of internal circuit change of perovskite solar cell according to ageing

Observation of internal circuit change of perovskite solar cell according to ageing

... Minjin Kim1, Denis Tondelier1, Jean-Eric Bourée1, Yvan Bonnassieux1, and Bernard Geffroy 1,2 1. LPICM-CNRS (UMR7647), Ecole Polytechnique, IP Paris, 91128, Palaiseau, France 2. Université Paris-Saclay, CEA, CNRS, NIMBE, ...

2

Efficiency enhancement of perovskite solar cells based on opal-like photonic crystals

Efficiency enhancement of perovskite solar cells based on opal-like photonic crystals

... a perovskite solar cell was numerically ...of perovskite spheres was predicted through a photonic enhancement factor as high as ...of perovskite solar ...

15

Light-activated photocurrent degradation and self-healing in perovskite solar cells

Light-activated photocurrent degradation and self-healing in perovskite solar cells

... hybrid perovskite solar cell performance with constant solar illumination in crystalline large-grain-size perovskite solar cells is due to the degradation of the photocurrent, ...

10

Study of TiO2/Graphene-based nanocomposites for perovskite solar cells: Synthesis and Properties

Study of TiO2/Graphene-based nanocomposites for perovskite solar cells: Synthesis and Properties

... dye-sensitized solar cells by incorporating carbon nanotubes in the TiO 2 mesoporous ...both perovskite solar cell processing (state-of-the-art efficiencies) and production of specific ...

3

Developing highly efficient lead halide perovskite solar cells

Developing highly efficient lead halide perovskite solar cells

... the perovskite scientific community to improve the device performance, the perovskite solar cell is now at a stage where it may be able to compete with traditional solar cell ...

132

Aging of Solution processed perovskite solar cells

Aging of Solution processed perovskite solar cells

... the solar cell is studied with XRD measurements as well as electrical ...The perovskite solar cell performance decreases with aging time (Table 1 and Figure 1a) and XRD data show the ...

2

Benefit from Photon Recycling at the Maximum-Power Point of State-of-the-Art Perovskite Solar Cells

Benefit from Photon Recycling at the Maximum-Power Point of State-of-the-Art Perovskite Solar Cells

... example, perovskite material quality will likely need to be even better than these targets, as charge transport layers in devices introduce new pathways for interfacial ...

12

Carbazole Electroactive Amorphous Molecular Material: Molecular Design, Synthesis, Characterization and Application in Perovskite Solar Cells

Carbazole Electroactive Amorphous Molecular Material: Molecular Design, Synthesis, Characterization and Application in Perovskite Solar Cells

... Scheme 1. Molecular structure of the novel molecular glass (iDM1). In iDM1 structure the carbazole core bears two di(4‐methoxyphenyl)aminyl moieties, which is commonly used in combination with carbazole to construct ...

10

Effects of 5-Ammonium Valeric Acid Iodide as Additive on Methyl Ammonium Lead Iodide Perovskite Solar Cells

Effects of 5-Ammonium Valeric Acid Iodide as Additive on Methyl Ammonium Lead Iodide Perovskite Solar Cells

... halide perovskite layer that acts as the solar light absorber and two selective contacts: A hole-transporting layer (HTL) is placed on the top of the PVK to collect and transport hole charge carriers and ...

16

Computational analysis of hybrid perovskite on silicon 2-T tandem solar cells based on a Si tunnel junction

Computational analysis of hybrid perovskite on silicon 2-T tandem solar cells based on a Si tunnel junction

... the solar-cell ...multi-junction solar cells (MJSC), which combine absorbers with different bandgap energies allowing to harvest a wider range of solar spectrum while lowering intrinsic losses ...

14

New Si-based multilayers for solar cell applications

New Si-based multilayers for solar cell applications

... sity at such an annealing treatment. We have achieved comparable intensity of emission within one minute of annealing and at a lesser temperature, in comparison to the classical annealing treatment that is done for ...

6

Influence of Schottky contact on the C-V and J-V characteristics of HTM-free perovskite solar cells

Influence of Schottky contact on the C-V and J-V characteristics of HTM-free perovskite solar cells

... Hetero-Junction Solar Cells (HJSCs) have been experimentally [ 2 , 3 ] and theoretically [ 4 , 5 ] in- vestigated Selected doped functional materials are added on each side of the Light Harvesting Material (LHM) ...

7

Hot Carrier Solar Cell: From Simulation to Devices

Hot Carrier Solar Cell: From Simulation to Devices

... HOT CARRIER SOLAR CELL : FROM SIMULATION TO DEVICES J. Rodière 1,2,3 *, H. Levard 1,2,3 , A. Delamarre 1,2,3 , A. Le Bris 1,2,3 , S. Laribi 1,2,3 , L.Lombez 1,2,3 & J.F. Guillemoles 1,2,3 J.-P Perez 4 ...

3

Interfacial Engineering through Chloride-Functionalized Self-Assembled Monolayers for High-Performance Perovskite Solar Cells

Interfacial Engineering through Chloride-Functionalized Self-Assembled Monolayers for High-Performance Perovskite Solar Cells

... hybrid perovskite (OIHPs) materials is one of the most promising for very high efficiency photovoltaic solar cells ...cation perovskite solar cells has been ...the solar cells ...

29

Ultra-low reflection porous silicon nanowires for solar cell applications

Ultra-low reflection porous silicon nanowires for solar cell applications

... “High-efficiency solar cell using a thin porous silicon layer,” Thin Solid Films 297(1-2), 299–303 ...stable solar to chemical conversion with n+-p junction crystalline silicon electrodes having ...

11

Assessment of the micromorph tandem solar cell

Assessment of the micromorph tandem solar cell

... This generation is made up of different types of thin film solar cells such as copper indium gallium selenide (CIGS), cadmium tellurides (CdTe), amorphous silicon ([r] ...

75

Carbazole-based material: synthesis, characterization, and application as hole transporting material in perovskite solar cells

Carbazole-based material: synthesis, characterization, and application as hole transporting material in perovskite solar cells

... 6 In order to improve the device stability against moisture in real operation, the HTM layer must protect the perovskite layer as far as possible. Hydrophilic HTM will be more susceptible to moisture ingress than ...

12

TiO$_2$/graphene-based nanocomposites synthesized by laser pyrolysis: properties and application in perovskite solar cells

TiO$_2$/graphene-based nanocomposites synthesized by laser pyrolysis: properties and application in perovskite solar cells

... Title and affiliations (must fit in this box) TiO 2 /graphene-based nanocomposites synthesized by laser pyrolysis: properties and application in perovskite solar cells Raphaëlle Belchi 1, 2 , Aurélie ...

3

Show all 4739 documents...

Sujets connexes