• Aucun résultat trouvé

Flax fiber

Green Laminate Composites Based on Polypropylene (PP) and Flax Fiber

Green Laminate Composites Based on Polypropylene (PP) and Flax Fiber

... polypropylene flax fiber composites can be fabricated easily by compression molding with acceptable ...hydrophilic flax fibers and these hydrophobic polymeric ...the fiber-matrix interface ...

6

Manufacturing and characterization of flax fiber reinforced thermoset composites

Manufacturing and characterization of flax fiber reinforced thermoset composites

... the fiber and the ...hydrophilic fiber and the hydrophobic ...the fiber or the matrix material. A commonly used treatment in flax-polypropylene (PP) composites is the addition of maleic ...

155

Wood and Flax Fiber Polyolefin Composites

Wood and Flax Fiber Polyolefin Composites

... An alternative approach using chemical principles to resolve the drying problem and improve the wood composite performance is was developed by Got et al. [17]. In general, the humidity and wood acidity are ...

11

Application of electro-technologies in processing of flax fiber

Application of electro-technologies in processing of flax fiber

... * = ′ − j ′′ where j = √−1 (1) The real part ’ is the dielectric constant that reflects the ability of the material to store electric energy when in an electromagnetic field; the imaginary part ′′ is the dielectric loss ...

16

On the multiscale tribological signatures of the tool helix angle in profile milling of woven flax fiber composites

On the multiscale tribological signatures of the tool helix angle in profile milling of woven flax fiber composites

... According to the cutting forces analysis and the microscopic investigation of Section 3.1 , it can be concluded that the brutal engagement of the cutting tool with zero helix angle stiff[r] ...

10

Formulation and Processing of Polypropylene – Flax Fiber Composites

Formulation and Processing of Polypropylene – Flax Fiber Composites

...  Flax fibers and shives can improve significantly the polymer performance even without fiber surface ...factors: flax types, formulation, and processing equipment and ...

28

Mechanical recycling of high density polyethylene/flax fiber composites

Mechanical recycling of high density polyethylene/flax fiber composites

... that fiber incorporation increases the material viscosity and the shear stresses generated in the extruder, leading to higher mechanical degradation, as well as higher chain scission and fiber breakup, and ...

129

Compare between flax shive and extracted flax shive reinforced PP composites

Compare between flax shive and extracted flax shive reinforced PP composites

... ABSTRACT Flax shive (FS), the woody part composing of over 70 wt% of the flax straw, is a waste product left after removing the fibers from flax ...of flax fiber, however, its low cost ...

15

Improvement of the fire behavior of poly(1,4-butanediol succinate)/flax biocomposites by fiber surface modification with phosphorus compounds: molecular versus macromolecular strategy

Improvement of the fire behavior of poly(1,4-butanediol succinate)/flax biocomposites by fiber surface modification with phosphorus compounds: molecular versus macromolecular strategy

... PBS/grafted flax fiber biocomposites When phosphorus is covalently bonded to flax for biocomposite samples, the degradation occurs in two steps whatever the ...grafted flax fibers and the ...

10

Study of a unidirectional flax reinforcement for biobased composite

Study of a unidirectional flax reinforcement for biobased composite

... unidirectional flax fiber composite (UD biobased composite) has been designed and manufactured based on the hot platen press ...Plant fiber composites usually exhibit two regions under tensile load, ...

127

Influence of retting process on the thermal and mechanical properties of flax/polypropylene composites made of canadian oilseed flax fibers

Influence of retting process on the thermal and mechanical properties of flax/polypropylene composites made of canadian oilseed flax fibers

... and flax /PP ...fractured flax/PP composite ...elementary fiber and elementary fiber bundle on the sample surface for PPF1 and PPF2 composites was very ...of flax and PP matrix can be ...

6

Rapid manufacturing of woven comingled flax/polypropylene composite structures

Rapid manufacturing of woven comingled flax/polypropylene composite structures

... at fiber bark and matrix, which is not observed with SEM analysis ...of flax fiber polymer composite should lead to bark free technical ...the fiber/ matrix interface and therefore, on the ...

17

Interrelation between melt processing conditions, formulation and properties of polypropylene / short flax and hemp fiber composites

Interrelation between melt processing conditions, formulation and properties of polypropylene / short flax and hemp fiber composites

... short flax fiber ...of flax fibers is also ...of flax content, presence of coupling agent and of a reactive additive on composite properties are .../ flax fibers composites have a large ...

7

Rheological properties of molten flax- and Tencel®-polypropylene composites: Influence of fiber morphology and concentration

Rheological properties of molten flax- and Tencel®-polypropylene composites: Influence of fiber morphology and concentration

... natural fiber reinforced polymers, the approaches used are those developed for sus- pensions of rigid particles of various aspect ...with fiber aspect ratio and ...natural fiber-polymer composite is ...

12

Study of translaminar fracture toughness of unidirectional flax/epoxy composite

Study of translaminar fracture toughness of unidirectional flax/epoxy composite

... The existing ASTM E1922 standard test method was employed to examine the fracture toughness of ECT speci- mens in tension, and an already developed methodology based on IRT, as well as A[r] ...

15

Analysis of the deformability of flax-fibre nonwoven fabrics during manufacturing.

Analysis of the deformability of flax-fibre nonwoven fabrics during manufacturing.

... 10 b shows draw-in results measured on square box shape under blank- holder pressure of 0.01 MPa for both F300 and F450 nonwoven fabrics and under blank-holder pressure of 0.2 MPa for on[r] ...

16

Long fiber thermoplastic pet-based composites: fiber content and consolidation pressure

Long fiber thermoplastic pet-based composites: fiber content and consolidation pressure

... / La version de cette publication peut être l’une des suivantes : la version prépublication de l’auteur, la version acceptée du manuscrit ou la version de l’éditeur. Access and use of [r] ...

2

Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics

Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics

... Introduction Fiber reinforced plastics are being more attractive in many engineering applications due to their higher mechanical properties compared to their low weights [1 –5] ...

9

Long fiber thermoplastic PET composites : fiber content and consolidation pressure

Long fiber thermoplastic PET composites : fiber content and consolidation pressure

... / La version de cette publication peut être l’une des suivantes : la version prépublication de l’auteur, la version acceptée du manuscrit ou la version de l’éditeur. Access and use of [r] ...

2

One and Two-Fiber Orientation Kinetic Theories of Fiber Suspensions

One and Two-Fiber Orientation Kinetic Theories of Fiber Suspensions

... The passage from the governing equations of Stokesian dynamics of N fibers to kinetic equations consists of, first, writing the Liouville equation that corresponds to the time evolution eq[r] ...

18

Show all 789 documents...

Sujets connexes