fiber composites
Piezoelectric-piezomagnetic behaviour of coated long fiber composites accounting for eigenfields
... Please cite this article as: George Chatzigeorgiou, Adil Benaarbia, Fodil Meraghni, Piezoelectric- piezomagnetic behaviour of coated long fiber composites accounting for eigenfields, Mechanics of Materials ...
48
Investigation and modeling of the fatigue damage in natural fiber composites
... natural fiber composites in structural applications is fairly new, knowing the mechanical behavior of such materials, in particular, the fatigue life and damage accumulation is crucial in designing new ...
12
Thermal Effects on Tribological Behavior in Machining Natural Fiber Composites
... fibers composites. Indeed, for carbon fibers composites, it has been demonstrated that increasing the cutting speed increases the cutting temperature during drilling operation to reach around 200-350 °C ...
13
Thermoset-natural fiber composites using nanocomposites for mass transit applications
... thermoset composites was ...natural fiber fabric. Natural fiber composites were prepared by hand lay-up followed by a vacuum step and by ...natural fiber composites were also ...
12
Natural Fiber Composites with Enhanced Fire Resistance
... flax fiber composites are shown in Figure ...clean fiber surface and not much adhering epoxy matrix on their ...flax fiber epoxy ...flax fiber epoxy in the presence of ...the ...
7
Mechanical recycling of high density polyethylene/flax fiber composites
... polypropylene/hemp composites, 28% for polypropylene/sisal composites, and up to 34% for glass fiber ...the fiber length was shown to significantly decrease during the injection molding ...
129
New polypropylene / triticale fiber composites: interrelation between composition and properties
... triticale fiber composites: interrelation between composition and properties Mihai, Mihaela; Ton-That, Minh-Tan; Ngo, Tri-Dung; Busnel, Frederic; Hu, ...
2
High Performance Polyolefin - Wood Fiber Composites
... wood fiber composites based on neat and recycled polypropylene (PP) were fabricated by melt ...all composites showed superior mechanical properties when compared with the pristine ...wood ...
3
Thermo-mechanical characterization of unsaturated polyester/glass fiber composites for recycling
... fibers composites under an already developed recycling process (thermomechanical process) and to use these measurements to forecast and design the future ...used composites LU1, LU2 and IN such as their ...
29
Thermo-mechanical Effects in Mechanical Polishing of Natural Fiber Composites
... NFRP composites is not yet investigated to ...NFRP composites using the pin-on-disc tribo test machine ...the fiber orientation has a significant effect on wear and frictional performances in ...
12
Elaboration and characterization of PET-Hemp fiber composites for thermoforming applications
... fiber concentration. 6.2.2 The kinetic analysis theory Various methods of kinetic analysis are described in the literature. Their classification is either based on the data collection techniques or on the ...
304
Multiscale tribo-mechanical analysis of natural fiber composites for manufacturing applications
... polypropylene composites at a geometric contact scale that is different from those investigated in ...NFRP composites surface by soliciting the elementary flax fibers and the polypropylene matrix separately ...
9
Multiscale tribo-mechanical analysis of natural fiber composites for manufacturing applications
... NFRP composites pose significant machinability issues because nat- ural fibers are themselves heterogeneous with high transversal flexibility [ 11–14 ...NFRP composites involve a multiscale heterogeneity from ...
9
Relationship between fiber chemical treatment and properties of recycled pp/bamboo fiber composites
... Keywords Adhesion, bamboo fibers, recycled polypropylene, rheological behavior Introduction Synthetic fiber-reinforced polymer composites have many applications, such as use in automotive, construc- tion, ...
14
Formulation and Processing of Polypropylene – Flax Fiber Composites
... Conclusions Flax fibers and shives can improve significantly the polymer performance even without fiber surface treatment. The composite properties are determined by many different factors: flax types, ...
28
Friction scale effect in drilling natural fiber composites
... fiber composites is among the real current industry ...fiber composites implies the mastering of the different tribological aspects during manufacturing processes, especially when machining because cutting ...
10
New Multiscale Approach for Machining Analysis of Natural Fiber Reinforced Bio-Composites
... natural fiber composites as shown in ...the fiber stiffness (“E” in ...the fiber type ...of fiber type (bamboo, Miscanthus or sisal ...(i.e. fiber stiffness) will overcome the ...
24
Manufacturing and characterization of flax fiber reinforced thermoset composites
... these composites provides an insight into the kinetics of diffusion of water which can later influence the mechanical or physio-chemical behavior of ...natural fiber composites. Unlike synthetic ...
155
Numerical and Experimental Investigations on Deep Drawing of G1151 Carbon Fiber Woven Composites
... woven composites in order to reduce the manufacturing cost and waste of composite material during the stamping process, The multi-scale anisotropic approach of woven composite was used to develop a finite element ...
17
Green Laminate Composites Based on Polypropylene (PP) and Flax Fiber
... flax fiber composites can be fabricated easily by compression molding with acceptable ...the composites improve the interfacial adhesion between hydrophilic flax fibers and these hydrophobic ...
6