• Aucun résultat trouvé

design and modeling

Design and Modeling of a Polymer Force Sensor

Design and Modeling of a Polymer Force Sensor

... Design and Modeling of a Polymer Force Sensor Nitish Kumar, Olivier Piccin, Laurence Meylheuc, Laurent Barb´e, Bernard Bayle Abstract—This article presents the design, modeling, force ...

11

Towards a Conceptual Design and Semantic Modeling Approach for Innovative Modular Products

Towards a Conceptual Design and Semantic Modeling Approach for Innovative Modular Products

... the design and modeling process would facilitate an evaluation of the behavioral performance of the future prod- ...a design approach for innovative modular products, easily maintainable ...

13

Design and modeling of carbon nanotube-based compliant mechanisms

Design and modeling of carbon nanotube-based compliant mechanisms

... macro- and micro-scale compliant mechanism theory to design carbon nanotube-based nano-scale compliant ...techniques and (2) the performance limitations from traditional nano-scale ...scientists ...

110

Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator

Dynamic modeling and design optimization of a 3-DOF spherical parallel manipulator

... dynamic modeling, multiobjective design optimization, Pareto-front, scatter matrix 1 Introduction The design of three Degree-of-Freedom (3-DOF) spherical parallel manipulators (SPMs) can consider ...

22

Computer-Aided Lipid Design: phase equilibrium modeling for product design

Computer-Aided Lipid Design: phase equilibrium modeling for product design

... equilibrium modeling as an auxiliary tool for product design, especially for those whose desired final properties are directly related to solid fat content (SFC) and melting ...(SLE) modeling ...

7

A Flexible Modeling and Simulation Framework for Design Space Exploration

A Flexible Modeling and Simulation Framework for Design Space Exploration

... the design of the 4G FAUST chipset, this paper presents a modeling and simulation framework for Design Space Exploration (DSE) which enables a rapid evaluation of the application-to-platform ...

5

Farming systems design: complementarities between experts' prototyping and modeling

Farming systems design: complementarities between experts' prototyping and modeling

... (iii) and reduce greenhouse gas emissions while (iv) improving energy efficiency and (v) ensuring food provision for local and global ...the design of new (FS), prototyping by experts ...

3

Linking objective and subjective modeling in engineering design through arc-elastic dominance

Linking objective and subjective modeling in engineering design through arc-elastic dominance

... 5.2. Design diagnosis and problem modeling Geothermal systems are built from three main functional units (see ...) and the objectives are: (i) harnessing cold calorific en- ergy from the ...

15

Toward proactive eco-design based on engineer and eco-designer's software interface modeling

Toward proactive eco-design based on engineer and eco-designer's software interface modeling

... UML modeling, design process, software interoperability, LCA, Design To Environment (DTE) 1 INTRODUCTION Our contribution in this article is to illustrate that proactivity can arise from a specific ...

12

Adaptive, Hyperspectral Imager: Design, Modeling, and Control

Adaptive, Hyperspectral Imager: Design, Modeling, and Control

... Imager: Design, Modeling, and Control Scot McGregor 1,2 , Antoine Monmayrant 1,2 , Simon Lacroix 1,2 1 CNRS, LAAS, 7 avenue du colonel Roche, F-31400 Toulouse, ...

3

Analysis, modeling and design of energy management and multisource power systems

Analysis, modeling and design of energy management and multisource power systems

... models and analysis of the fully-differential transimpedance front-end amplifier from Chapter 2 are useful for modeling the system response to capacitive coupling changes in the detection field below the lamp ...

596

Design and modeling of an exhaust gas waste heat autoclave

Design and modeling of an exhaust gas waste heat autoclave

... Currently, the design utilizes a 0.59 meter, concentric tube cross-flow heat exchanger and high-temperature heat transfer fluid to draw thermal energy from the exhaust [r] ...

32

Mechatronics, Design and Modeling of a Motorcycle Riding Simulator

Mechatronics, Design and Modeling of a Motorcycle Riding Simulator

... longitudinal and lateral displacements are also not retained, due to their expense, in this first prototype ...acceleration and braking phases, as well as exerting effort on the cyclist’s arms by varying ...

15

Design and modeling of a high current switching regulator

Design and modeling of a high current switching regulator

... In designing a system such as a switching regulator, the most important advantage of using Matlab over transistor level modeling is found in the frequency response[r] ...

231

Actuator and sensor design and modeling for structural acoustic control

Actuator and sensor design and modeling for structural acoustic control

... A large part of the research presented in this thesis is dependent on the development and correlation of a high-fidelity finite element model of the MIT acoustic [r] ...

140

Design and modeling of an active aeroelastic wing

Design and modeling of an active aeroelastic wing

... It was found that for a configuration without the aerodynamic shell, the FEM frequencies were within 4% of the experimental values for all of the modes under conside[r] ...

91

Design, dynamic modeling, simulation and feedback control of hydrostatic bearing

Design, dynamic modeling, simulation and feedback control of hydrostatic bearing

... Given the above functional requirements a water resistant linear motor direct drive is the best choice. 4 Conveniently the attractive force between forcer and perman[r] ...

113

User modeling and profiling for intelligent assistance in collaborative design and manufacturing

User modeling and profiling for intelligent assistance in collaborative design and manufacturing

... For the publisher’s version, please access the DOI link below./ Pour consulter la version de l’éditeur, utilisez le lien DOI ci-dessous. https://doi.org/10.4224/21272485 Access and use of this website and ...

23

Design, modeling, and optimization of indium arsenide diodes for microscale thermophotovoltaics

Design, modeling, and optimization of indium arsenide diodes for microscale thermophotovoltaics

... is caused by tunneling. The simulation data uses a mobility 1.7 times smaller than the previous figure. Figure A is the I-V characteristic of the PIN structure and [r] ...

88

DESIGN, MODELING AND EXPERIMENTATION OF A REVERSIBLE HP-ORC PROTOTYPE

DESIGN, MODELING AND EXPERIMENTATION OF A REVERSIBLE HP-ORC PROTOTYPE

... roof and a geothermal heat ...cycle and operate as an ...needs and the surplus heat generated during the summer is utilized to generate electricity in a so-called HP/ORC ...prototype and ...

10

Show all 10000 documents...

Sujets connexes