Corrosion Behavior
Corrosion behavior of thermohydrogen processed Ti6Al4V
... https://doi.org/10.1016/j.scriptamat.2007.03.004 Access and use of this website and the material on it are subject to the Terms and Conditions set forth at Corrosion behavior of thermohydrogen processed ...
15
Corrosion Behavior of α,β'-Brass in NaNO3 Solutions
... the corrosion processes of ...the corrosion behavior using electrochemical ...to corrosion, is principally studied for the development of water taps (15) (16) (17) ...work, corrosion ...
12
Corrosion Behavior of 6101 Aluminum Alloy Strands for Automotive Wires
... to corrosion damage. Obviously, the corrosion behavior of the harness depends on parameters such as the geometry of the harness (number of strand arms and the space between them) and the intrinsic ...
9
Corrosion behavior of carbon steel in presence of sulfate-reducing bacteria in seawater environment
... herein, corrosion behavior of S235JR carbon steel was studied in the modified North Sea sea- water that was multiple times inoculated with one of two different SRB pure cultures, ...general corrosion, ...
19
Surface composition and corrosion behavior of an Al-Cu alloy
... noble corrosion potentials significantly nobler than the matrix 12,13 ...their corrosion behavior, however there are only few studies which show the evolution of surface chemistry as a function of ...
183
Corrosion behavior of iron in cementitious solution at 80°C in anoxic condition
... Corrosion behavior of iron in cementitious solution at 80°C in anoxic condition D. Pally 1 , B. Grenut 1 , F. Miserque ², P. Le Bescop 1 , L. Chomat 1 , V. L’Hostis 1 1 Den-Service d’Etude du Comportement ...
2
Combination of AFM, SKPFM, and SIMS to Study the Corrosion Behavior of S-phase particles in AA2024-T351
... b Laboratoire de Physique et Chimie des Nano-Objets (LPCNO), Unité Mixte de Recherche CNRS 5215, Institut National des Sciences Appliquées, 31077 Toulouse Cedex 04, France The dissolution mechanism of S-phase particles ...
8
Corrosion Behavior of 6101 Aluminum Alloy Strands for Automotive Wires
... the corrosion behavior of AA6101: role of plastic ...the corrosion potential toward higher values. The corrosion potential of the T8 sample was between those of T4-A and T4 specimens in good ...
8
Investigation of erosion-corrosion behavior of (WTi)C based weld overlays
... erosion-corrosion behavior of three (WTi)C based overlays and one monocrystalline WC overlay has been studied using a slurry pot erosion-corrosion test apparatus at 30°C, in an aqueous slurry ...
23
Statistical Study of the Corrosion Behavior of Al2CuMg Intermetallics in AA2024-T351 by SKPFM
... the corrosion behavior from one S-phase particle to another could be related to differences in the chemical composition of the oxide film at its surface 共protecting it from dissolution for a given time兲 or ...
10
Electrophoretic deposition of boehmite particles to improve the anti-corrosion behavior of anodized aluminum alloy 2024-T3
... The purpose of this study was to prepare and evaluate a new two-step sealing process for a porous and tortuous anodic film, prepared on aluminum alloy (AA) 2024-T3, to ensure anti-corrosion properties. This ...
9
Corrosion Behavior of α,β'-Brass in NaNO3 Solutions
... the corrosion processes of ...the corrosion behavior using electrochemical ...to corrosion, is principally studied for the development of water taps (15) (16) (17) ...work, corrosion ...
11
Statistical Study of the Corrosion Behavior of Al2CuMg Intermetallics in AA2024-T351 by SKPFM
... the corrosion behavior from one S-phase particle to another could be related to differences in the chemical composition of the oxide film at its surface 共protecting it from dissolution for a given time兲 or ...
9
Microhardness and Corrosion Behavior of Ni-SiC Electrodeposited Coatings
... M NaCl solution for 30 days. Results and Discussion Many authors [1,2,4–7,12] think that the variation of electro- lyzing parameters (current density, bath pH, granulometry of particles, particles concentration, and ...
5
Corrosion behavior of carbon steel in presence of sulfate-reducing bacteria in seawater environment
... The corrosion pits in general show a dependency on the crystallographic orientation, which can be deduced from their square or rectangular appearance in the SEM images and from the rather straight boundaries of ...
18
Electrochemical Investigation of the Corrosion Behavior of API 5L-X65 Carbon Steel in Carbon Dioxide Medium
... This behavior was in agreement with the imped- ance results obtained at the corrosion ...the corrosion processes were initially controlled by mass transport but they became under activation control ...
11
Effect of protein adsorption on the corrosion behavior of 70Cu-30Ni alloy in artificial seawater
... There are two opposite goals for the control of microbial adhesion and biofilm formation: one is the prevention of biofilms, and the other one is their promotion. Controlling the adsorption of biomolecules, which is the ...
31
Electrophoretic deposition of boehmite particles to improve the anti-corrosion behavior of anodized aluminum alloy 2024-T3
... after constant EPD (10 V, 15 min) Fig. 4. FEG-SEM cross-sectional views of the anodic film after constant EPD (10 V, 15 min) followed by the hydrothermal post-treatment (deionized water at 98 °C, 2 h) This result, i.e. ...
8
The Influence of Specimen Thickness on the High Temperature Corrosion Behavior of CMSX-4 during Thermal-Cycling Exposure
... The objective of the present study was to investigate the effect of the specimen’s thickness on the oxide scale spallation behavior during thermal-cycling exposure. It is expected, that the mechanical strength, ...
12
Effect of cerium on structure modifications of a hybrid sol–gel coating, its mechanical properties and anti-corrosion behavior
... This behavior can be associated [35,37,38] to a more important penetration of the electrolyte through the coating, which could be due, in our case to the partial destabilization of the hybrid network for high ...
8