• Aucun résultat trouvé

Microstructure and mechanical behavior of TIGbimetallic joints

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Microstructure and mechanical behavior of TIGbimetallic joints"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

2nd INTERNATIONAL CONFERENCE ON RHEOLOGY AND MODELING OF MATERIALS 2015

Microstructure and mechanical behavior of TIG bimetallic joints

M.F. Benlamnouar, M.Gousmine, N. Bensaid, A. Boutaghane

Abstract : Bimetallic weld techniques have progressed a great deal in the last decade. In this work, the effect of the filler metal composition on microstructure and mechanical behavior of dissimilar HSLA-X70/304L stainless steels weld joint is investigated.

The dissimilar weld joints are fabricated using austenitic, duplex and low Carbone filler metal. The mechanical behavior is investigated through microhardness, charpy impact and tensile test.The results show that, the weld metal composition has a great influence on mechanical properties and microstructure of weldments, in particular the grain size and phases nature, changes with filler metal composition. In addition presence of martensitic slats in the FZ when using the low Carbone filler metal, detailed microstructure examination is carried out and related to the mechanical behavior of the dissimilar joints.

Keywords : TIG welding, Bimetallic weld, HSLA, DSS, HAZ, microstructure, Microhardness

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.76 KB )

Documents relatifs

PARTICLE SHAPE DESCRIPTORS AND THEIR INFLUENCE ON THE MECHANICAL BEHAVIOR

Besides unilateral contact and Coulomb friction, other parameters relevant to the shape and contact anisotropy, which influence the anisotropy of stress

Characterization of local mechanical behavior ofTA6V weld sheet

The results highlight strong relationship between the hardness (HIT), Young’s modulus (EIT) values and the microstructure of each zone and phase present along the weld joint?. The

Characterization of local mechanical behavior of TA6V weld sheet L. Rabahi

Consequently, the main aim of this work is to use X-ray diffraction technique, together with the nano-indentation measurements in order to investigate the mechanical properties at

Effect of microstructure and precipitationphenomena on the mechanical behavior ofAA6061-T6 aluminum alloy weld.

Abstract: In the present study, the effect of microstructure and precipitation phenomena on the micro hardness, tensile strength, impacttoughness, and electrochemical behavior

Effect of microstructure and precipitation phenomena on the mechanical behaviour of AA6061-T6aluminumalloy weld

Abstract: In the present study, the effect of microstructure and precipitation phenomena on the micro hardness, tensile strength, impact toughness and electrochemical behavior

Microstructure and mechanical behavior indissimilar 13Cr/2205stainless steel welded pipes

The fatigue tests conducted on dissimilar weldedspecimens led us to conclude that the weld metal is considered as a weak link of the weld joint in the high cyclefatigue regime. This

Microstructure and Mechanical Behavior inDissimilar SAF2205/API X52 Welded Pipes

Abstract: The welding of a duplex stainless steel SAF 2205 DSS (UNS 31803) and high strength low alloy steel API X52by shielded metal arc welding process was conducted using

Impact resolution methods of contact on the mechanical behavior of structures

The contact constraints are considered in this formulation using penalizing coefficients and Lagrange multipliers, penalizing the non-penetration restrictions violations in