• Aucun résultat trouvé

Invariant shape features and Relevance Feedbackfor Weld Defect Image Retrieval

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Invariant shape features and Relevance Feedbackfor Weld Defect Image Retrieval"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

VIth International Workshop NDT in Progress 2011

Invariant shape features and Relevance Feedback for Weld Defect Image Retrieval

N. Nacereddine, D. Ziou

Abstract : Relevance feedback mechanism is used in Content-based Image Retrieval (CBIR) to attempt to minimize the amount of interaction between the user and the system required to improve the retrieval system performance. In this work, such system is proposed for weld radiograms in radiographic testing, with the aim of searching from the overall image database, interactively with the radiograph expert, discontinuities similar to some common weld defect types such as, crack, lack of penetration, porosity and solid inclusion. Similarity measures use feature vectors based on shape descriptors invariant to usual geometric transformations.

Experiments over the tested database demonstrate that the CBIR gives good results and is practical and promising for the future of welded joint radiographic examination.

Keywords : weld defect, Radiographic testing, shape descriptor, CBIR, relevance feedback

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.75 KB )

Documents relatifs

Fusion-based shape descriptor for weld defectradiographic image retrieval

In this paper, such a system is proposed for weld radiograms in radiographic testing, with the aim of searching from the overall image database, interactively with the

Hybrid Shape Descriptors for an Improved Weld Defect Retrieval in Radiographic Testing

The rectangularity and the roundness in the geometric descriptor (GEO) are used in order to propose an hybridization algorithm so that the hybrid descriptor issued from GEO and each

Hybrid Shape Descriptors for an Improved Weld Defect Retrieval in Radiographic Testing

The rectangularity and the roundness in the geometric descriptor (GEO) are used in order to propose an hybridization algorithm so that the hybrid descriptor issued

Automatic Detection and Features Computationof Weld Defects for Radiographic Inspection

Weld defect features are computed from the segmentation result (final binary level set).. We have computed several features; they are ranked in two categories: Geometric features

Automatic Detection and Features Computation of Weld Defects for Radiographic Inspection

Weld defect segmentation and restoration from rough radiographic image: (a) Defined ROI in rough weld radiographic image, (b) ROI image with initial contour (dashed green line)

Extraction of weld defect from radiographic images using the level set segmentation without reinitialization

Image and Signal Processing Laboratory Welding and Control Research Center Route Dely Brahim Bp.. 64

Hybrid Wavelet-Fractal Image Coder Applied to Radiographic Images of Weld Defects

A comparative study between the hybrid wavelet-fractal coder and pure fractal compression technique have been made in order to investigate the compression ratio

Parametric active contour for boundaryestimation of weld defects in radiographic testing

In this approach we exploit the performance of the GVF as external force and enhance it by joining to it external adaptive pressure forces which bring speed to the snake evolution