• Aucun résultat trouvé

Propagation of Lamb waves in an immersedperiodically grooved plate: Experimentaldetection of the scattered converted backwardwaves

N/A
N/A
Protected

Academic year: 2021

Partager "Propagation of Lamb waves in an immersedperiodically grooved plate: Experimentaldetection of the scattered converted backwardwaves"

Copied!
1
0
0

Texte intégral

(1)

Ultrasonics

Volume 54, 2014, Pages 860-866

Propagation of Lamb waves in an immersed periodically grooved plate: Experimental detection of the scattered converted backward

waves

Nadia Harhad, Mounsif Ech-Cherif El-Kettani, Hakim Djelouah, Jean-Louis Izbicki, Mihai Predoi

Abstract: Guided waves propagation in immersed plates with irregular surfaces has potential application to detection and assessment of the extent, depth and pattern of the irregularity. The complexity of the problem, due to the large number of involved parameters, has limited the number of existing studies. The simplest case of irregularities of practical interest is the two-dimensional corrosion profile. Even this case is in general so complex, that one can extract several amplitude dominant periodic surfaces only by using a Fourier spectrum of the surface. Guided waves in plates, with one or both free surfaces having periodic perturbations of different shapes, have been presented in specialized literature. In this paper is studied the propagation of Lamb waves in an aluminum plate with a periodic grooved surface on only one side and immersed in water. The interaction between an incident Lamb wave and the grating gives rise to retro-converted waves. Preliminary numerical simulation by the finite element method is performed in order to obtain key parameters for the experiments. It is shown that retroconverted waves radiating into the water are detectable although their amplitudes are small. The phonon relation is verified for the leaky Lamb modes. The damping coefficients of the leaky Lamb modes in the grooved immersed plate are evaluated.

Keywords : Liquid–solid interfaces, Rough plate, Periodic grating, Lamb waves, Converted modes

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

In the present study, an inversion procedure is proposed based on 3D compo- nent Lamb wave phase velocity matching to identify the stiffness parameters of orthotropic composite

The interaction between the incident Lamb wave and the grating gives rise to reflected converted waves.. This phenomenon is studied experimentally in the case of an immersed plate

Preliminary numerical simulation by using a finite elements method is performed in order to help

In this paper is studied the propagation of Lamb waves in an aluminum plate with a periodic grooved surface on only one side and immersed in water. The interaction

Preliminary numerical simulation by using a finite elements method is performed in order to help experiments. Keywords : Rough surface, Lamb waves, conversion modes,

These results are superimposed on the theoretical dispersion curves of an infinite plane plate, which allows to identify the Lamb waves: a part of S 0 incident mode at 320 kHz

u(r) is not restricted to the (( muffin-tin )> form, but obtaining solutions is difficult unless it is. The equation above is readily modified so as to describe the

En particulier, une étude a été menée pour comparer et mesurer la vitesse de groupe dans deux types de matériaux afin de mettre en évidence la faisabilité de