• Aucun résultat trouvé

Contribution à la modélisation de structures etdispositifs passifs microondes basée surl’utilisation de différentes techniquesd’optimisation : Application aux filtres en guidesd’ondes rectangulaires métalliques

N/A
N/A
Protected

Academic year: 2021

Partager "Contribution à la modélisation de structures etdispositifs passifs microondes basée surl’utilisation de différentes techniquesd’optimisation : Application aux filtres en guidesd’ondes rectangulaires métalliques"

Copied!
1
0
0

Texte intégral

(1)

Islem BOUCHACHI, 2017, «Contribution à la modélisation de structures et dispositifs passifs microondes basée sur l’utilisation de différentes techniques d’optimisation : Application aux filtres en guides d’ondes rectangulaires métalliques», Thèse de doctorat,

Université de Constantine 1

Contribution à la modélisation de structures et dispositifs passifs microondes basée sur

l’utilisation de différentes techniques

d’optimisation : Application aux filtres en guides d’ondes rectangulaires métalliques

Islem BOUCHACHI

Soutenue en: 2017

Abstract: In this work, we proposed a method for the synthesis of hollow waveguides filters. It consists of a combination of several calculations, simulations and optimizations techniques classified in a defined order to result in band-pass filters. It is a question of:

First, to generate the coupling matrix starting from the filter specifications. Deduce the equivalent circuit and then convert it into a microwave structure, which consists of replacing the resonators and inverters of the circuit by resonant cavities and couplers. Once the circuit has been converted to a microwave structure, we need an analysis method to ensure the right conversion. For this, we used the segmentation method, which consists in fragmenting the structure into several basic elements (junction, bend and T-junction). Each element is analyzed separately using the mode-matching method, and then the structure is assimilated to a network made up of these basic elements. Since the final result requires optimization because it does not correspond perfectly to the specifications of the structure to be synthesized, we have studied and used three optimization techniques: genetic algorithms, particle swarm optimization and neural networks. To validate our synthesis method, we have successfully applied it to the synthesis of the Tchebychev, Dual-mode, and generalized Tchebychev band-pass filters.

Keywords : filter, waveguide, Coupling matrix, Mode-matching, Segmentation method, Optimization techniques.

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Documents relatifs

Un filtre hybride à 10 GHz a récemment démontré le double accord de la fréquence centrale et de la bande passante [137] de manière discrète avec des diodes p-i-n. L’accord de

Ce comportement peut s’expliquer par le fait que les mailles sont plus ou moins toutes alignées ; si on observe une maille seule (figure 2.9), sous l’application d’un champ

De nombreuses méthodes existent aujourd'hui pour réaliser l'étape 1 décrite dans la figure 2.1-1, ce qui en rend le choix particulièrement difficile. Cependant, les

D'un autre côté, Les nouvelles techniques de fabrication SICs Substrate Integrated Circuits ont été proposées pour la réalisation de circuits en guide d'ondes NRD Non

The prerequisites are on the one hand the training of specialized nurses (14-15) and doctors and, on the other hand, the development of a pre-dialysis information program,

Mean of CoP surface (A), CoP length in the medial–lateral axis (B) and CoP speed (C) for five different conditions (OKN + SVV: 80° left and 80° right, respectively, no OKN + SVV,

Pour utiliser la terminologie de Partoune (2002), il apparaît clairement que notre proposition est bien une « tâche basée sur une fiction sous contrôle, adaptée aux élèves

likelihood that children enter into the dialogue, express their opinions and provide..