• Aucun résultat trouvé

Capillary infiltration of hexadecane in packed SiC powder and in SiC/SiC preforms: Pore description and calculation of molten Si infiltration

N/A
N/A
Protected

Academic year: 2021

Partager "Capillary infiltration of hexadecane in packed SiC powder and in SiC/SiC preforms: Pore description and calculation of molten Si infiltration"

Copied!
20
0
0

Texte intégral

Loading

Figure

Figure 3: Pore-size distribution of silicon carbide powder compacts samples A, B, C, D, and E
Figure 6: Experimental system of the capillary rise test with solvent
Figure 7: Time dependence of hexadecane capillary infiltration into powder compacts with:
Figure 10: Calculated curves of the front height and weight gain versus time  during silicon rise at 1420°C in an impregnated SiC preform with the d eff
+3

Références

Documents relatifs

In the proposed viscosity model for the particles with load-dependent friction coefficient, the effective friction coefficient µ ef f is specified by the effective normal contact

Paulo de Mello Tavares Lima, Pierre Crouzoulon, Geneviève Zabré, Adama Kaboré, Vincent Niderkorn, Herve Hoste, Adibe Luiz Abdalla,

The heptane pool fire, which could not be extinguished by water mist from a single 7G-5 nozzle located 3 m above the fire, was extinguished when a 0.3% Class A foam solution was

⁴Direct/inverse systems are oen illustrated with data om Algonquian languages, but they generally lack di- rect/inverse marking in the local domain, and are thus farther removed

Créer un ficher .m pour utiliser une fonction est comme avoir une boîte qu’il faut ouvrir à chaque fois que l’on veut utiliser cette fonction. Si l’on commence à créer trop

Référence article Désignation Référence article Code_Magasin Quantité en stock Code article N° Commande Nocli –Passer Nocli – Tiers Facture Date Cmde Date livraison

In addition to the above requirements, underlined by IChemE, 2017, it is expected that students learning and teaching Safety, Health and Environment will be undertaken in an

Compared to state of the art adaptive slicing (top left) which is limited to planar layers, our print (bottom left) has a smooth surface finish while using the same number of