• Aucun résultat trouvé

Inferring transit time distributions from atmospheric tracer data: Assessment of the predictive capacities of Lumped Parameter Models on a 3D crystalline aquifer model

N/A
N/A
Protected

Academic year: 2021

Partager "Inferring transit time distributions from atmospheric tracer data: Assessment of the predictive capacities of Lumped Parameter Models on a 3D crystalline aquifer model"

Copied!
49
0
0

Texte intégral

Références

Documents relatifs

In [9] we proposed a new simple lumped parameter model that uses a Fluid Structure Interaction (FSI) description to consistently model the in- teraction between the moving wall and

The de-convolved depth sec- tions have been then integrated with respect to depth to trans- form the amplitude block into a 3D pseudo-velocity block in depth, using velocity

The generation of fine scale ocean current information for an arbitrary position, depth and time using these netCDF data files in a multi-dimensional interpolation scheme is

Carbonated and magnesium co-doped amorphous calcium phosphate powders with different compositions were synthesized by an adapted precipitation method and then consolidated by

In particular, the convergent motion of the lower layer is well characterized although only very few observations are available. For comparison purpose we have run on this sequence

the mean values of the maximum force and dissipated energy are higher for both cases with the identified joint PDF than for the cases with the true joint PDF. However, this is not

In this work, the heat exchange service parameter data from the phosphoric acid concentration loop allows the predictive models of the specific exchange coefficient to

La comparaison des valeurs de la microdureté des quatre alliages étudiés suggère que l'addition du cuivre Cu en plus de Mn où de l’excès de Si (4) provoque une augmentation de la