- la délivrance d'une homologation

(1)

**Référence: E1310R0010R031036102 Annexes:** - Rapport Technique

- Fiche de Renseignements du constructeur Sandweiler, le 11 octobre 2012

Communication concernant:

⁽²⁾ -

la délivrance d'une homologation

Communication concerning:

approval granted

- l'extension d'homologation

approval extended

- le refus d'homologation

approval refused

- le retrait d'homologation

approval withdrawn

- l'arrêt définitif de la production

production definitely discontinued

d'un type de sous-ensemble électrique/électronique

⁽²⁾

en ce qui concerne le Règlement N° 10

of a type of electrical/electronic sub-assembly with regard to Regulation N° 10

**Numéro d'homologation par type: E1310R0010R031036102**

Approval number:

Marque d'homologation:

10R - 03 10361

Approval mark:

1. Fabricant (marque commerciale du constructeur):

Make (trade name of manufacturer):

HIRSCHMANN 2. Type:

Type:

SPIDER II 8TX PoE Dénomination(s) commerciale(s)

générale(s):

General commercial description(s):

Industrial ETHERNET Rail Switch with PoE converter Version(s)/Variante(s):

Version(s)/Variant(s):

Not applicable

3. Moyens d'identification du type, s'ils sont marqués sur le véhicule / composant / entité technique

⁽²⁾

:

Means of identification of type, if marked on the vehicle / component / separate technical unit:

SPIDER II 8TX PoE

3.1. Emplacement de ce marquage:

Location of that marking:

On the housing of the main unit

4. Catégorie du véhicule:

Category of vehicle:

Not applicable

(2)

D-72654 Neckartenzlingen 6. Dans le cas de composants ou d'entités

techniques, emplacement et procédé de fixation de la marque d’homologation CEE:

In the case of components and separate technical units, location and method of affixing of the ECE approval mark:

Label fixed on the housing of the main unit

7. Adresse(s) de l' (des) usine(s) d'assemblage:

Address(es) of assembly plant(s):

Advantech Co., Ltd.

3F, No. 5, 7 & 9, Lane 130, Ming-Chuan Rd, Shing-Tien City, Taipei Hsien, Taiwan, R.O.C.

or

Advantech Technology (China) Co., Ltd.

No. 600, Hanpu Road, Yu-Shan Town, Kunshan City, Jiangsu Province, P.R. China.

8. Informations supplémentaires (s'il y a lieu):

Additional informations (where applicable):

See appendix

9. Autorité déléguée:

Assigned authority:

Société Nationale de Certification et d'Homologation L-5230 Sandweiler

Service technique responsable de l’exécution des essais:

Technical service responsible for carrying out the tests:

TÜV Rheinland Luxemburg GmbH 2a, Kalchesbruck

L-1852 Luxembourg

10. Date du rapport d'essai:

Date of test report:

09.10.2012

11. Numéro du rapport d'essai:

Number of test report:

84-R10-01037/12

12. Remarques (s'il y a lieu):

Remarks (if any):

Not applicable

(3)

Date:

15. Signature:

Signature:

Pour le Département des Transports Pour la SNCH

Marco FELTES Claude LIESCH

Inspecteur principal 1

^er

en rang Directeur

16. L'index de l'ensemble des renseignements déposé chez l'autorité de réception, qui peut être obtenu sur demande, est joint.

The index to the information package lodged with the approval authority, which may be obtained on request, is attached.

See index to type-approval report

17. Raison(s) de l'extension:

Reason(s) for extension:

Refer to appendix 0 of test report

_________________

2 Biffer la mention inutile Strike out what does not apply

(4)

concernant l'homologation par type d'un sous ensemble électrique/électronique selon le Règlement N 10.

concerning the type-approval of an electrical/electronic sub-assembly under Regulation N 10.

1. Informations supplémentaires.

Additional information.

1.1. Tension nominale du système électrique [V]:

Electrical system rated voltage [V]:

18 to 32V DC Masse:

Ground:

Positive/Negative

⁽²⁾

1.2. Ce SEEE peut être utilisé sur n'importe

quel type de véhicule avec les restrictions suivantes:

This ESA can be used on any vehicle type with the following restrictions:

- Operating temperature: 0 to 60°C - Operating humidity: 10% to 95% RH 1.2.1. Conditions d'installation, s'il y a lieu:

Installation conditions, if any:

Not applicable 1.3. Ce SEEE peut seulement être utilisé sur les

types de véhicules suivants:

This ESA can be used only on the following vehicle types:

Not applicable 1.3.1. Conditions d'installation, s'il y a lieu:

Installation conditions, if any:

Not applicable 1.4. La (les) méthode(s) spécifique(s) d'essais

utilisée(s) et les bandes de fréquences couvertes pour déterminer l'immunité étai(ent): (indiquez s’il vous plaît à partir de l’annexe 9 la méthode précise utilisée).

The specific test method(s) used and the frequency ranges covered to determine immunity were: (Please specify precise method used from annex 9).

Not applicable

1.5. Laboratoire accrédité au titre de la norme ISO 17025 et reconnu par l’autorité

d’homologation chargé d’effectuer les essais:

Laboratory accredited to ISO 17025 and recognized by the Approval Authority responsible for carrying out the tests:

Not applicable

2. Commentaires:

Remarks:

The vehicle is not possible to be stopped or interrupted from the ESA or from the service center.

_________________

2 Biffer la mention inutile Strike out what does not apply

(5)

**Référence: E1310R0010R031036102 Annexes:** - Rapport Technique

- Fiche de Renseignements du constructeur Sandweiler, le 11 octobre 2012

Index du dossier d'homologation

Index to type-approval report

Numéro d'homologation:

Approval number:

E1310R0010R031036102 Révision:

Revision:

00 Marque de fabrique ou de commerce:

Trade name or mark:

HIRSCHMANN

Type:

Type:

SPIDER II 8TX PoE

1. Procès-verbal d'essai:

Test report:

N° 84-R10-01037/12 - Test report:

- Technical informations:

- List of modifications:

Page 1 to 7;

Appendix L - Page 8 & 9;

Appendix 0 - Page 10.

2. Dossier du constructeur:

Report of the manufacturer:

N° SPIDER II 8TX PoE-02 - Information Document:

- List of Annexes:

- Annexes:

Page 1;

Page 2;

Refer to List of Annexes.

3. Autres documents annexés:

Not applicable 4. Date de délivrance de l'homologation

initiale:

Date of issue of initial type approval:

08.10.2010 5. Date de la dernière délivrance de pages

révisées:

Date of last issue of revised pages:

Not applicable 6. Date de la dernière délivrance d'une

homologation révisée:

Date of last extension:

11.10.2012

(6)

T E S T R E P O R T

according to ECE-Regulation

Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

No.: ECE-R10 including

No.: 03 series of amendments, corrigendum 1

Previously granted

ECE-type approval : E1310R0010R031036101

Structure of report: 0. General information

1. Test object(s) and general test information 2. Test minutes

3. Remark concerning tested object(s) 4. Appendices

5. Statement of conformity

The Test Report shall be reproduced and published in full by the client only. It shall however be reproduced partially with the written permission of the Testing Laboratory only.

E13*10R00*10R03*10361*02

Société Nationale de Certification et d'Homologation L-5201 SANDWEILER (Luxembourg)

Organisme accrédité OLAS EN 45011 Accréditation N° 5/001 (Portée communiquée sur demande)

(7)

0. General information

0.1. Trade mark or trade name of type :

0.2. Manufacturer’s name for the type of the ESA

: SPIDER II 8TX PoE

0.3. Name and address of manufacturer : Hirschmann Automation and Control GmbH

Stuttgarterstr. 45-51, 72654 Neckartenzlingen Germany 0.4. Name and address of authorised

representative, if any

: Not applicable

0.5. No. of information document date of issue

date of last amendment

: : :

SPIDER II 8TX PoE-01 October 1, 2010

October 1, 2012

E13*10R00*10R03*10361*02

(8)

1. Test object(s) and general test information

1.1. Test object(s)

Identification no. : Not applicable

Model : SPIDER II 8TX PoE and SPIDER 5TX PD EEC

Remark : Industrial ethernet rail switch connected with PoE converter

1.2. General test information 1.2.1 Order issued by

(if different from manufacturer)

: -- 1.2.2 Test object received on : --

1.2.3 Test date : September 27, 2012

1.2.4 Test site : Compliance Certification Services Inc., Wugu, Taiwan 1.2.5 Remark : The results of the test refer exclusively to the objects

mentioned under point 1.1. of this report.

E13*10R00*10R03*10361*02

(9)

2. Test minutes

2.1. Test facilities : The measurement equipment used was in compliance with the test requirements.

2.2. Test data of the tested ESA : See Appendix L

2.3. Type approval tests conducted : Radiated narrowband electromagnetic emissions Radiated broadband electromagnetic emissions Immunity to electromagnetic radiation

Immunity to transient disturbances Emission of conducted disturbances

2.4. Test results The ESA type has been tested according to the amendments mentioned in appendix 0.

The performace of the ESA has been tested under 24V input mode.

2.4.1. Radiated narrowband electromagnetic emissions

: Antenna position horizontal and vertical

frequency measured data correction factor corrected data limit value

No. MHz dB(µV/m) dB(µV/m) dB(µV/m) dB(µV/m)

horiz. vertic. horiz. vertic. horiz. vertic. horiz. vertic. horiz. vertic.

1 71.5 43.8 55.6 60.6 -21.4 -18.8 34.2 41.8 42.5 47.9

2 100.0 58.7 64.2 58.9 -21.3 -20.6 42.9 38.3 43.9 44.7

3 150.2 72.3 60.9 62.1 -19.1 -21.5 41.8 40.6 46.6 42.4

4 249.6 98.5 58.2 59.8 -17.2 -21.4 41.0 38.4 49.9 43.8

5 -- 100.0 -- 63.0 -- -21.3 -- 41.7 -- 43.9

Except for the point(s) mentioned above, the radiated narrowband emissions according to Annex 8, in any of the 13 frequency bands identified in paragraph 4.3 were 10 dB below the reference limit.

2.4.2. Radiated broadband electromagnetic emissions

: Antenna position horizontal and vertical

frequency measured data correction factor corrected data limit value

No. MHz dB(µV/m) dB(µV/m) dB(µV/m) dB(µV/m)

horiz. vertic. horiz. vertic. horiz. vertic. horiz. vertic. horiz. vertic.

1 100.0 58.7 66.0 65.9 -21.3 -20.6 44.7 45.3 53.9 54.7

2 -- 71.5 -- 67.2 -- -21.4 -- 45.8 -- 52.5

3 -- 101.9 -- 67.3 -- -21.2 -- 46.1 -- 54.0

E13*10R00*10R03*10361*02

(10)

Except for the point(s) mentioned above, the radiated broadband emissions according to annex 7, in any of the 13 frequency bands identified in paragraph 4.3 were 10 dB below the reference limit.

2.4.3. Immunity Test : Not applicable. The ESA is not related to immunity- related functions (2.12); the vehicle is not possible to be stopped or interrupted from the ESA or from the service center.

Test method : Absorber chamber test

Specified frequency range : 20 - 2000 MHz

Tested frequency points : 27/45/65/90/120/150/190/230/280/380/450/600/750/9 00/1300/1800 MHz

Field strength : 30 V/m

At the above mentioned frequency points the ESA did not exhibit any malfunction which would cause any degradation of performance which could cause confusion to other road users or any degradation in the driver’s direct control of a vehicle fitted with the system which could be observed by the driver or other road user.

2.4.4. Immunity to transient disturbances

: The tests were conducted by the method according to ISO 7637-2: 2004 as described in Annex 10, and the functional status of the ESA after the tests complied with the levels shown in Table 1 of Paragraph 6.

Test pulse number

Immunity test level

Functional status for systems Related to

immunity-related functions

Not related to immunity-related

functions

Test results

1 III C D C

2a III B D A

2b III C D C

3a III A D A

3b III A D A

4 III C D A

E13*10R00*10R03*10361*02

(11)

2.4.5. Emission of conducted disturbances

: The tests were conducted by the method according to ISO 7637-2: 2004 as described in Annex 10, and the pulse amplitudes were within the limits specified in Table 2 of Paragraph 6.

Polarity of pulse amplitude

Maximum allowed pulse amplitude for vehicles

with 24V system

Test results

Slow pulses Fast pulses

Positive +150 0.0 0.0

Negative -450 -29.0 -29.0

2.4.6. Markings : The approval mark is marked clearly legible and indelible on the housing of the main unit.

2.5. Variants and components : Not applicable

E13*10R00*10R03*10361*02

(12)

3. Remark concerning tested object(s)

All versions of the ESA type as stated in the information document are covered with the tested version(s) and test object(s) respectively.

4. Appendices

L Technical information about the separate technical unit (ESA) according to Annex 3B of the communication concerning the ECE-type approval

0 List of modifications

1 Information folder No.

(excluding apps.)

: SPIDER II 8TX PoE-02 (2 pages)

5. Statement of conformity

The above mentioned information folder and the type described in that comply with the requirements mentioned on page 1.

Luxemburg, date see Appendix L KWU/JYW

M.S.M.E. K. Wu

E13*10R00*10R03*10361*02

(13)

Appendix L Technical information about the separate technical unit (ESA) according to Annex 3B of the communication concerning the ECE-type approval

1. Make (trade name of manufacturer)

:

2. Type and general commercial description(s)

: SPIDER II 8TX PoE

commercial description(s) : Industrial ethernet rail switch connected with PoE converter

version(s) : Not applicable

3. Means of identification of type, if marked on the compo-

nent/separate technical unit

: SPIDER II 8TX PoE

3.1. Location of that marking : On the housing of the main unit 4. Category of vehicle : Not applicable

5. Name and address of manufacturer

: Hirschmann Automation and Control GmbH Stuttgarterstr. 45-51, 72654 Neckartenzlingen Germany

Name and address of authorized representative, if any

: Not applicable

6. In the case of components and separate technical units, location and method of affixing of the ECE approval mark

: Label fixed on the housing of the main unit

7. Address(es) of the assembly plant(s)

: Advantech Co., Ltd.

3F, No. 5, 7 & 9, Lane 130, Ming-Chuan Rd, Shing-Tien City, Taipei Hsien, Taiwan, R.O.C.

or

Advantech Technology (China) Co., Ltd.

No. 600, Hanpu Road, Yu-Shan Town, Kunshan City, Jiangsu Province, P.R. China.

E13*10R00*10R03*10361*02

(14)

8. Additional information : See Information Folder No. SPIDER II 8TX PoE-02 10. Date of Report : October 9, 2012

12. Remarks (if any) : Not applicable 17. Reasons for extension : Not applicable Appendix

1. Additional information

1.1. Electrical system rated voltage : 18 ~ 32V DC

Ground : Negative

1.2. This ESA can be used on any vehicle type with the following restrictions

: - Operating temperature: 0 ~ 60 ° C - Operating humidity: 10% ~ 95% RH

- The vehicle is not possible to be stopped or interrupted from the ESA or from the service center.

1.2.1. Installation conditions, if any : Not applicable 1.3. This ESA can be used only on the

following vehicle types

: Not applicable

1.3.1. Installation conditions, if any : Not applicable 1.4. The specific test method(s) used

and the frequency ranges covered to determine immunity were (please specify precise method used from Annex 9)

: Free field, 20 ~ 1000 MHz Not applicable

1.5. Approved/recognised laboratory (for the purpose of this

Regulation) responsible for carrying out the test

: TÜV Rheinland Luxemburg GmbH

2. Remarks : Not applicable

E13*10R00*10R03*10361*02

(15)

List of modifications Appendix 0

Correction of : --

Modification of : --

Addition of : -PoE converter (SPIDER 5TX PD EEC)

Deletion of : --

E13*10R00*10R03*10361*02

(16)

2. Type : SPIDER II 8TX PoE

3. Means of identification of type, if marked on the component / separate technical unit

: SPIDER II 8TX PoE

3.1. Location of that marking : On the housing of the main unit

4. Name and address of manufacturer : Hirschmann Automation and Control GmbH Stuttgarterstr. 45-51, 72654 Neckartenzlingen Germany

Name and Address of authorized representative, if any

: Not applicable

5. In the case of components and separate

technical units, location and method of affixing of the ECE approval mark

: Label fixed on the housing of the main unit

6. Address(es) of the assembly plant(s) : Advantech Co., Ltd.

3F, No. 5, 7 & 9, Lane 130, Ming-Chuan Rd, Shing-Tien City, Taipei Hsien, Taiwan, R.O.C.

or

Advantech Technology (China) Co., Ltd.

No.600, Hanpu Road, Yushan Town, Kunshan City, Jiangsu Province, P.R. China.

7. This ESA shall be approved as a : Component/ STU 8. Any restrictions of use and conditions for

fitting

: The ESA is restricted to be installed in vehicle by power system only; the vehicle is not possible to be stopped or interrupted from the ESA or from the service center

9. Electrical system rated voltage : 18 ~ 32V DC, positive/ negative ground

E13*10R00*10R03*10361*02

(17)

List of Annexes

Annex Page

A Drawing or photo of the ESA A1~ A 7 #

B Specification B1 ~ B 3 #

C System layout and block diagram C1 ~ C 11 #

E13*10R00*10R03*10361*02

(18)

!"#

* on the housing of the main unit (SPIDER II 8TX PoE) $$

E13*10R00*10R03*10361*02

(19)

* on the housing

* on the housing of PoE converter (SPIDER 1TX/ 1FX PD)

E13*10R00*10R03*10361*02

(20)

ΎKŶƚŚĞŚŽƵƐŝŶŐŽĨƚŚĞŵĂŝŶƵŶŝƚ;^W/Z//ϴdyWŽͿ

E13*10R00*10R03*10361*02

(21)

ΎKŶƚŚĞŚŽƵƐŝŶŐŽĨWŽĐŽŶǀĞƌƚĞƌ;^W/Z//ϱdyWͿ

E13*10R00*10R03*10361*02

(22)

E13*10R00*10R03*10361*02

(23)

E13*10R00*10R03*10361*02

(24)

E13*10R00*10R03*10361*02

Société Nationale de Certification et d'Homologation

(25)

http:www.net-star.tw Ver.1.2 13-Sep-2010

Introduction

Communications !!

Standard: IEEE802.3ΕIEE802.3uΕIEEE802.3xΕIEEE802.3af

!

Interface

Connector RJ-45 × 8

LED Power, Link/Activity, Speed

PoE

Standard IEEE-802.3af with internal isolation Ports 5 ~ 8

Power Output 48VDC

Supply Watts 15.4 Watts max per port RJ-45 Pin Positive (Vcc+): 1, 2

Negative (Vcc-): 3, 6

Mechanism

Enclosure IP-30, metal with aluminum shell Dimensions 35mm(W) x 110mm(D) x 138mm(H) Mounting DIN-rail

Order information

!

Power

Connector 3-pole terminal block (Black) Power Input 24VDC (18 ~ 32VDC) Power consumption 74.9 Watts max @ 24VDC

Environment

Operating Temperature 0 ~ 60°C (32 ~ 140°F ) Storage Temperature -20 ~ 70°C (-4 ~ 185°F ) Operating Humidity 10 ~ 95% (non-condensing) Storage Humidity 10 ~ 95% (non-condensing)

MBTF 196,554 hrs

Certification

Standard ŶUL/cUL 508 ŶUL 1604 ŶC-Ticker Ŷ E13 CE Ŷ EN55022 Ŷ EN61000-3-2/3 Ŷ EN61131-2

Ŷ EN61000-6-2/4 Ŷ EN61000-4-2/3/4/5/6 FCC CFR47 :2005, Part 15 Class A Shock IEC60068-2-27

Freefall IEC60068-2-32 Vibration IEC60068-2-6

!

Features

z Store-and-Forward Switching Architecture z Supports PoE Function on port 5 ~ 8 z Supports 24VDC Power input z Provides 56Kbytes Packet Buffer z Provides 2K MAC Address Table z IP-30, metal with aluminum shell

z Installation in a Pollution Degree 2 environment

Ŷ SPIDER II 8TX PoE 8450-570RHIR 8 Port Switch with 8 x TX ports there from 4 x PoE ports

The SPIDER II 8TX PoE is unmanaged industrial switch supports PoE (Power over Ethernet) function on port 5~8, the switch can compliant IEEE 802.3af and provide up to 15.4 watts power output per port. The switch support IEEE802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-negotiation and provide a power fault relay warning function when power failures occur.

E13*10R00*10R03*10361*02

(26)

http://www.net-star.com.tw

$

;

Ethernet Communications

Standard IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3af

Port connector 10/100TX PoE(PD): RJ-45 * 1 100FX: SC type connector * 1 (support multimode/siglemode)

Features

Support multimode/singlemode SC fiber connector Support transparent packet size 64-1536 Bytes Support Link Fault Pass-Through

Support -40~70ɗ Operating Temperature

Support IEEE 802.3af compliant with isolation of 2,250 VDC UL508, E-mark, C-ticker safety approval

Specifications

Mechanism

Enclosure IP-30, Metal with Aluminum shell Dimensions (W*H*D) 100*25*70 mm

Installation DIN-Rail Design

Environment

Operating Temperature -40 ~ 70ɗ(0 ~ 167ə) Storage Temperature -40 ~ 85ɗ(-40 ~ 185ə) Operating Humidity 5 ~ 95%(non-condensing) Storage Humidity 5 ~ 95%(non-condensing)

MTBF TBD hrs

PoE

Input Voltage 48V DC (36 ~ 57V DC, phantom power) Classification Class 1

Introduction

The SPIDER 1TX/1FX PD EEC is Power-over-Ethernet-converter that transfer data from 10/100BaseTX copper to fiber interfaces. The POE Converter is designed to receive data and power from POE networks and then to refer data out through fiber connections thus eliminating extra power cables to extend the network flexibility.

The PoE(PD) receives its power from a network PoE PSE (Power Sourcing Equipment), allowing for a flexible and easy to install network switch for expanding the current LAN.

Certifications

Approval UL508, E13, C-Ticker

CE Basic standards

FCC CFR47 :2005, Part 15 Class A EMC EN55022, IEC/EN 61000-6-2,

EN61131-2 Class A Shock IEC60068-2-27 Freefall IEC60068-2-32 Vibration IEC60068-2-6

General

LED Indicators System: Power

10/100TX: Link Status/Data, Speed 100FX: Link Status/Data

E13*10R00*10R03*10361*02

(27)

http://www.net-star.com.tw

sϬ͘ϮϬ&ĞďͲϮϬϭϭ

;

Ethernet Communications Standard IEEE802.3

IEEE802.3u IEEE802.3x IEEE802.3af Port connector 10/100TX: RJ-45 * 4

10/100TX PoE (PD): RJ-45 * 1

Hardware

Switch Architecture Back-plane: 1Gbps Packet Buffer 448Kbits

Mac Address 2K

Features

Back-plane (Switching Fabric): 1Gbps Provide 448Kbits packet buffer Provide 2K MAC address table

Support transparent packet size 64-1536 Bytes Support -40~70ɗ Operating Temperature

Support IEEE 802.3af compliant with isolation of 2,250 VDC UL508, E-mark, C-ticker approval

Specifications

Mechanism

Enclosure IP-30, Metal with Aluminum shell Dimensions (WHD) 1002570 mm

Installation

DIN-Rail Design

Environment

Operating Temperature -40 ~ 70ɗ(0 ~ 167ə) Storage Temperature -40 ~ 85ɗ(-40 ~ 185ə)

Operating Humidity

5 ~ 95%(non-condensing) Storage Humidity 5 ~ 95%(non-condensing)

MTBF TBD hrs

PoE

Input Voltage

48V DC (36 ~ 57V DC, phantom power)

Classification

Class 1

Introduction

The SPIDER 5TX PD EEC is a compact 5-port Fast Ethernet Switch with a PD port that allows this switch to receive its power requirement from a PoE Switch or PoE Injector. It is a high-performance, cost-effective and easy to use network switch for expanding home and office networks.

The PoE (PD) receives its power from a network PoE PSE (Power Sourcing Equipment), allowing for a flexible and easy to install network switch for expanding the current LAN.

Certifications

Approval

UL508, E13, C-Ticker CE Basic standards

FCC CFR47 :2005, Part 15 Class A EMC EN55022, IEC/EN 61000-6-2,

EN61131-2 Class A Shock IEC60068-2-27 Freefall IEC60068-2-32 Vibration IEC60068-2-6 General

LED Indicators

System: Power

10/100TX: Link Status/Data, Speed

E13*10R00*10R03*10361*02

(28)

E13*10R00*10R03*10361*02

(29)

E13*10R00*10R03*10361*02

(30)

E13*10R00*10R03*10361*02

(31)

E13*10R00*10R03*10361*02

(32)

E13*10R00*10R03*10361*02

(33)

E13*10R00*10R03*10361*02

(34)

E13*10R00*10R03*10361*02

(35)

5 5

4 4

3 3

2 2

1 1

8 ports 10/100 POE Switch IP 178D x1 PD64004A x1 LT3837 x1 UC3843 x1

Transformer

POE Transform

er RJ45 PORT #1~#4#5~#8RJ45 PORT POE

48VPD64004A

LT3837 POE PORT5~824V -> 48V 48V

3.3V POWER 24V INPUT

SYSTEM POWER UC3843 1.8V POWER

IP178D

25MHz clockReset

System clock Reset Logic

48V

24VDC Input

S P I D E R I I 8 T X / 4 P o E DC/DC conver t e r

24V3.3V 8X TP Port

8 Port Switch Controller IP 178D 48V

Terminal Block 24VLED #1~#8

4 Port POE Circuit PD 64004A

DC/DC converter

LED indicator

isolation

isolation 01_Block.SCH8 PORTS POE SWITCH

NETSTAR TECHNOLOGY CORPORATION B Thursday, June 18, 2009 Title SizeDocument Number Date:Sheet

Block Diagram

E13*10R00*10R03*10361*02

(36)

5 5

4 4

3 3

2 2

Fible Transceiver

IP113A Tramsformer 5071to 3.3

O.S.C 25MHZ

AME8500

Total sheet

֮ٙټጠ ፹ࡳֲཚ

SPIDE 1TX/1F

ࠌشข঴

ሽʳ ሁʳ ቹʳ ᎁʳ ᢞʳ ।

ठڻ

֮ٙᒳᇆ

12~48V 3.3V RJ-45

LED

1/5

E13*10R00*10R03*10361*02

(37)

5 5

4 4

3 3

2 2

1 1

AP09N20 CLASS 3 54.9ohm CLASS 2 82.5ohmRCLASS_CLASS 0_OPEN CLASS 1 150ohm CLASS 4 38.3ohm A Vout = 1.24 [ 1+(R24+R6)/R25] CR

GNDլլլլ૞૞૞૞ࢮࢮࢮࢮၞၞၞၞIC R40---0805 T1----LAYOUT C55ᔾ२T1 Monday, November 08, 2010

SPIDER1TX/1S PD EPCB009580R

ข঴ټጠ PCB NO Date:

TPTX- TPTX+ PWR48VPW_P PW_N

TPRX+

TPTX- TPTX+

2.5VCC

PW_P PW_N PC817_2

PC817_2

3.3V

CT CT CT 2.5VCC

2.5VCC TPRX- TPRX+

TPRX- 2163GNDGND TPRX+TPRX+TPRX-TPRX-

TPTX+TPTX+

TPTX-TPTX-

LED_TP_LINK LED_TP_SPD LED_FX_LINK/FX_FULL

2.5VCC

TPTX+ TPTX-

TPRX+ TPRX- 3.3V

3.3V3.3VCC

2.5AVCC R47 1K

C72 1uF/100V (1812) R3875 VP8019LF

U5 VP 8019LF

123 67891011141516TD+TCTTD- RD+ RCTRD-RX-RXCTRX+TX-TXCTTX+ C65 1000P R62 1K

L5

Commion choke 330uH 4Pin DIP C66 330P

ISO1 HCPL-817-06CE 5V 5mA 1-Ch

21

43 R581K R6010K

R3975 D11 SMAJ75CA12

C33

0.01U/200V(1808)C32

0.01U/200V(1808) R4349.9(1206) R523.3 R54 1K

C53 1U C58 0.047uF/100V(0805)

D6

Zener Diode 68V/1W ZS68 SMA

1 2

R64 14.7K R63 24.3K R61 330

C340.1U C45 1uF/100V (1812)

C48 NC C64 0.1U

C60

0.047uF/100V(0805)

R57 30K(1206)

-+

D2 HD_06

4

1

3

2 C350.1U R53 4.7,NC

T1CK6188-BL 48 51 2

6

9 7

D4

GBLC03C-LF-T7 SOD-323

1 2

Q1 AP09N20H N-Ch 200V 8.6A SOT-252 1

2 3

R56 33,NC D12 SP432A

3 2

1

R5910

C44 1000P/4KV(1808) C63 0.047uF/100V(0805)

C59 0.047uF/100V(0805)

C41 390P

R36 49.9

R37 49.9

R34 49.9 C40 390P L60.33U R55 0

C70 10U/10V(1206),NC C7110U/10V(1206),NC

R51 0.3(1206)

R50 0.3(1206)

R45 26.1K C57 1000P

R49 100

D5

GBLC03C-LF-T7 SOD-323

1 2

C360.1U C380.1U U6 LM5071

10 812

43 16

13

9 71514652

1 11

VCC RTN

COMP

AUXRCLASS ARTN

CS

OUT VEESSRTUVLORTNUVLORSIGVIN FB

R31 R41 10

C47 680P +C49

220U/10V(TC) D TYPE

C554700P/2KV(Y-CAP)

R32

SEMTEC H

U555 2510P81 23456789

10 C62 0.1U

L8BEAD(1206) C61 0.1U

R42 L7BEAD(1206)

D8

SU14 1 2

R35 49.9 D10SU14,NC 12

D9SU14 12

R40 1K,NC C50 0.1U

C46

47 00 pF

/2

00 V(1 20 6), NC

D7SU54 12

-+

D3 HD_06

4

1

3

2 C52 10U/10V(1206)

+C51

220U/10V(TC) D TYPE

C42

0.01U/200V(1808)

C39

0.01U/200V(1808) C431000P/4KV(1808) R46 33.2KR44 590K C54

0.047uF/100V(0805)

E13*10R00*10R03*10361*02

(38)

5 5

4 4

3 3

2 2

1 1

48V isolation

S P I D E R P D 5 T X

1XTPPort

p o r t s 1 0 / 1 0 0 P D S w i t c h

5Port SwitchController IP178D

P D 4 8 V I N

4XTPPort

D C / D C c o n v e r t e r M - 5 0 7 1 x 1 P 1 7 8 D x 1 L E D # 4

3.3V

I P 1 7 8 D

LED indicator

# 4

Reset SYSTEMPOWER LM-5071

R J 4 5 P O R T

Transformer 48V INPUT

1.8V POWER

S y s t e m c l o c k R e s e t L o g i c

3.3V POWER

# 1

Transformers

R J 4 5 P O R T

25MHz clock *4 Title SizeDocument Number Date:Sheet

01_Block.SCH

5 PORTS PD SWITCH

NETSTAR TECHNOLOGY CORPORATION Custom Tuesday, September 04, 2012 Title SizeDocument Number Date:Sheet

01_Block.SCH

5 PORTS PD SWITCH

NETSTAR TECHNOLOGY CORPORATION Custom Tuesday, September 04, 2012 Title SizeDocument Number Date:Sheet

01_Block.SCH

5 PORTS PD SWITCH

NETSTAR TECHNOLOGY CORPORATION Custom Tuesday, September 04, 2012

E13*10R00*10R03*10361*02

- la délivrance d'une homologation

Référence: E13*10R00*10R03*10361*02 Annexes: - Rapport Technique

- Fiche de Renseignements du constructeur Sandweiler, le 11 octobre 2012

Communication concernant:

la délivrance d'une homologation

- l'extension d'homologation

- le refus d'homologation

- le retrait d'homologation

- l'arrêt définitif de la production

d'un type de sous-ensemble électrique/électronique

en ce qui concerne le Règlement N° 10

Numéro d'homologation par type: E13*10R00*10R03*10361*02

Marque d'homologation:

10R - 03 10361

1. Fabricant (marque commerciale du constructeur):

HIRSCHMANN 2. Type:

SPIDER II 8TX PoE Dénomination(s) commerciale(s)

générale(s):

Industrial ETHERNET Rail Switch with PoE converter Version(s)/Variante(s):

Not applicable

3. Moyens d'identification du type, s'ils sont marqués sur le véhicule / composant / entité technique

:

SPIDER II 8TX PoE

3.1. Emplacement de ce marquage:

On the housing of the main unit

4. Catégorie du véhicule:

Not applicable

D-72654 Neckartenzlingen 6. Dans le cas de composants ou d'entités

techniques, emplacement et procédé de fixation de la marque d’homologation CEE:

Label fixed on the housing of the main unit

7. Adresse(s) de l' (des) usine(s) d'assemblage:

Advantech Co., Ltd.

3F, No. 5, 7 & 9, Lane 130, Ming-Chuan Rd, Shing-Tien City, Taipei Hsien, Taiwan, R.O.C.

or

Advantech Technology (China) Co., Ltd.

No. 600, Hanpu Road, Yu-Shan Town, Kunshan City, Jiangsu Province, P.R. China.

8. Informations supplémentaires (s'il y a lieu):

See appendix

9. Autorité déléguée:

Société Nationale de Certification et d'Homologation L-5230 Sandweiler

Service technique responsable de l’exécution des essais:

TÜV Rheinland Luxemburg GmbH 2a, Kalchesbruck

L-1852 Luxembourg

10. Date du rapport d'essai:

09.10.2012

11. Numéro du rapport d'essai:

84-R10-01037/12

12. Remarques (s'il y a lieu):

Not applicable

15. Signature:

Pour le Département des Transports Pour la SNCH

Marco FELTES Claude LIESCH

Inspecteur principal 1

en rang Directeur

16. L'index de l'ensemble des renseignements déposé chez l'autorité de réception, qui peut être obtenu sur demande, est joint.

See index to type-approval report

17. Raison(s) de l'extension:

Refer to appendix 0 of test report

_________________

concernant l'homologation par type d'un sous ensemble électrique/électronique selon le Règlement N 10.

1. Informations supplémentaires.

1.1. Tension nominale du système électrique [V]:

18 to 32V DC Masse:

Positive/Negative

1.2. Ce SEEE peut être utilisé sur n'importe

quel type de véhicule avec les restrictions suivantes:

- Operating temperature: 0 to 60°C - Operating humidity: 10% to 95% RH 1.2.1. Conditions d'installation, s'il y a lieu:

Not applicable 1.3. Ce SEEE peut seulement être utilisé sur les

types de véhicules suivants:

Not applicable 1.3.1. Conditions d'installation, s'il y a lieu:

Not applicable 1.4. La (les) méthode(s) spécifique(s) d'essais

utilisée(s) et les bandes de fréquences couvertes pour déterminer l'immunité étai(ent): (indiquez s’il vous plaît à partir de l’annexe 9 la méthode précise utilisée).

Not applicable

1.5. Laboratoire accrédité au titre de la norme ISO 17025 et reconnu par l’autorité

d’homologation chargé d’effectuer les essais:

Not applicable

2. Commentaires:

The vehicle is not possible to be stopped or interrupted from the ESA or from the service center.

_________________

Référence: E13*10R00*10R03*10361*02 Annexes: - Rapport Technique

**Référence: E1310R0010R031036102 Annexes:** - Rapport Technique

**Numéro d'homologation par type: E1310R0010R031036102**

**Référence: E1310R0010R031036102 Annexes:** - Rapport Technique

E1310R0010R031036102 Révision:

ECE-type approval : E1310R0010R031036101