js"l :{t lj

However, Mostek recommends that a separate active device (such as a 7400 series TTL gate) be used to oscillate the crystal and the waveform from that oscillator be

The connectors are designed to fit in standard Digital Equipment Corporation 2x3 cutouts (used on most of the newer systems). Each bulkhead connector will accept

o No. Turn the terminal off. Unscrew the four Phillips screws on the bottom of the keyboard. Remove the bottom cover.. Turn it over. Disconnect the keyboard cable

Lagragian Interpolation lends itself nicely to machine calculation, but when the indices are equal the missing terms of the products require special treatmento

1. Please specify the type number and serial number of the basic unit as well as the EAI part number and de- scription of the part when inquiring about replacement items

This is similar to the read head test, and again the system addresses the tracks in turn I checking the results for proper response from the tape system.. Page

Adams's first adventures used an interpreter program, written in BASIC, that would read a data file and spin out the adventure in accordance with the data in that file and the

After you type this in, you assemble it by turning control over to the LADS assembler after naming this as the source code. The result of the assembly is the object code. These