• Aucun résultat trouvé

Electrostatic Precipitator: Technological Development and Applications to Thermal Incineration Processes in CEA

N/A
N/A
Protected

Academic year: 2021

Partager "Electrostatic Precipitator: Technological Development and Applications to Thermal Incineration Processes in CEA"

Copied!
5
0
0

Texte intégral

Figure

Fig. 1. CEA’s IRIS process with its electrostatic precipitator.
Fig. 2. View of the five central filtration electrode geometries tested in the IRIS process electrostatic precipitator.
Fig. 4. Change in dust collection efficiency as function of time using the 25 mm steel tube.
Fig. 7. Comparison of filtration efficiency as a factor of time for two electrodes (shaped rod and multi-point rod) using direct or direct/alternating power supply.

Références

Documents relatifs

Dif- ferent steady state flows that cover a variety of orientation states are used to generate the approximations (i.e., iORT orthotropic fitted closure, CO4P2 and CO4P3

The aim of this controller is to combine the estimation (based on the current DNI value) of the water mass flow rate to impose at the inlet of the system in order to

New multi-rod linear actuator for direct-drive, wide mechanical band pass applications.. Pierre-Emmanuel Cavarec, Hamid Ben Ahmed,

“A new Poisson-type deviation inequality for Markov jump processes with positive Wasserstein curvature”. “Exponential Contraction in Wasserstein Distances for Diffu- sion

Another approach keeps the original dynamics, except that the fast dynamics are now slowed down by a certain factor which is such that the dynamics of the slow variables remains

Using Clustering and Controlled Regression to Analyze the Orientation of Rod-Like Objects.. Roberto Marazzato, Amelia

bending rigidity ~c, the spontaneous curvature co and the osmotic pressure AP control the vesicle shapes such as discocyte, stomatocyte, dumbbell and so on [6].. In LSF model

In this context, this paper proposes to design desktop level EDM machine to consider the basic principle of EDM where the pulse spark generates between the tool and work