• Aucun résultat trouvé

Premières Journées Internationales de Physique JIPC1 Eddy current characterization of nanomaterials

N/A
N/A
Protected

Academic year: 2021

Partager "Premières Journées Internationales de Physique JIPC1 Eddy current characterization of nanomaterials"

Copied!
1
0
0

Texte intégral

(1)

Premières Journées Internationales de Physique JIPC1

Eddy current characterization of nanomaterials

A.YOUNES, H.OUBOUCHOU and M.ZERGOUG Welding and NDT Research Center, Algiers (Chéraga)‐ Algeria

Abstract.

NDT Magnetic measurements as impedance in Eddy currents, remanence and corecitif in hysteresis loop are used to study the different stages of mechanical alloying in the Fe‐Co system. In this paper, we want to change the electromagnetic properties of Fe‐Co, by developing their metallurgical parameters such as grain size. For this we are used a planetary ball mill, we are milled the Fe‐Co alloy for different milling times until to obtain nanostructure, the lamellar structure with some small particles embedded in them was observed during the first stage of mechanical alloying. The characterization by X‐

ray diffraction shows after 10 h of milling the formation of a disordered solid solution having a body‐

centered cubic (bcc) structure. After 40h of milling, morphological studies indicated that the average crystallites size is around 15 nm.

Keywords: nanostructure materials, powder metallurgy, NDT, Eddy current, Magnetic measurement.

Références

Documents relatifs

Atlantic Provinces Library Association Lisa Goddard.. Memorial University Libraries

read all the information under the video and then do the 3 exercises and check your answers.. And you, what are you doing now apart from

Nous avons obtenu un niveau exemplaire dans notre démarche de management de l’éco-conception labellisée par l’Afnor certification sur l’ensemble du groupe MEDIA6...

The coercivity of FeCo alloy depends strongly on the microstructure, the residual field and the coercivity shows a maximum and minimum value respectively at 5 hours

The coercivity of FeCo alloy depends strongly on the microstructure, the residual field and the coercivity shows a maximum and minimum value respectively at 5 hours of milling,

Cette phase est essentielle est projet, elle est celle qui va mettre en place l’amélioration de l’infrastructure Club Tour grâce à l’école de Design auxquels nous avons

Among these models, intestinal perfusion is the most common experiment used to study the in vivo drug permeability and intestinal metabolism in different regions of the

Nous avons obtenu un niveau exemplaire dans notre démarche de management de l’éco-conception labellisée par l’Afnor certification sur l’ensemble du groupe MEDIA6...