•
Burrough s
B 1 000 Series
SMCS
Reference Card
(Relative to SMCS 10.0.007)
ATTACH
Attaches a station to a program or remote file.
Controller and system DDT syntax:
ATTACH-,---~---~~
TOIF'LE
T<
remote file nurnber><
remote file name>PROG RAM
L
< program name><
job number>~>-~----.--~L--,r- <
Isn~
1LSTATlON~ L:'::ationname>~
BROADCAST
Sends a message to all logged-on stations.
Syntax:
BROADCAST - ,- ---,--- -- < message string> ---1
L . ----.J
BYE
Logs the user off the SMCS program.
Workstation, remote DDT, and controller syntax:
~YE---1
CHANGE
Changes various station attributes.
Controlier and system ODT s:'ntax:
ADDR ESS ---.-~---__,_-< value> - ---,---1
ADDRESS (RECEIVE) ADDRESS (TRANSMIT) FREQUENCY (RECEIVE) FREQUENCY (TRANSMIT) PHONE---~
RETRIES ---1
TERMINALTYPE TRAN (RECEIVE) TRAN (TRANSMIT)
DIAGNOSTIC - - - - ---,---,--- -- -- --,---__,_- ON - -- ---.----'
GOODRESULTS OFF
LOGICALACK TRUE
READY FALSE
Copyright © 1983 Burroughs Corporation, Detroit., Michigan 48232
Printed in U.S.A. (2-83) _ 1 . 1151875
CLEAR
Clears a remote file.
Controller and system DDT syntax'
CLEAR F1LE - - - - r - < remote file number ~ L - -< remote file name>
CLOSE Command Closes the JOBS file.
Controller and system DDT syntax:
CLOSE---~
CONTiNUE Command
Causes a step macro procedure to resume.
Workstation, remote DDT, and controller syntax:
CONTINUE - --- --- -____1
DETACH
Detaches a station from a program or remote file.
Controller and system DDT syntax:
DETACH~---_.---~
FROMTPROGRAM L<program name>
L
< job number> -FILE L < remote file number>
< remote file name>
~..- ___ ____ -,----J I _ C~<
Isn > ________~-'---__I
LSTATIONJ L<stationname>
_-I
DUMP
Causes an SMCS program dump to be created_
Controller and system DDT syntax:
DUMP- - - -- -- - - -- -- -- ---!
DYNAMIC
Controls the method by which stations are marked off-line.
System ODT syntax:
DYNAMIC --,-E---~-~-F-~---,---1
FILE
Provides information on a file.
Syntax:
FILE
L
~-< file-identifier>----1
- L <
family name>/J
< multi-file id >...-JHARDWARE
Specifies the recordsize of the TRACE file.
System ODT syntax:
HARDWARELP---,~--'-3-2-~-,---~
C:'
20----.l
-2-
HELP
Provides a list of all valid commands for the sta ton.
Syntax:
ljELP
ID
Assigns an identifier to the station.
Workstation, remote OOT, and controller syntax:
10 < identifier> - r
t --- . -.
- - - ---rl- - - - ----j< command stong >---1
! < macro procedure> I--.---J
INITIATE
Initiates a program in the JOBS file at the system DDT.
System DDT syntax:
INITIATE <program-id>---- - ---j JOBS
Returns information on jobs in the mix. Workstation, remote DDT, and controller syntax:
,OBS---~
LOGON
Adds, changes, deletes, or lists the default log-on command.
Workstation, remote DDT, and controller syntax:
LOGON ADD - - - - -~--<: logon command> - - - - r= - - - j
1 CHANGE ~
L ! <macroprocedure» DELETE---- - - -- - -- ---j LlST---~MACRO
Adds, changes, deletes or lists macro procedures.
Controller syntax:
< macro text >- , -- - - 1 MACRO T A D D ---,--< macm name>
CHANG E---.J
DE LETE < macro name > ---~
LIST - - - , - -- - - -- ----r- - ----1
< macro name>
ON-~~~~~~~~~~~~~
Workstation and remote DDT syntax:
MACR0
1
ADD ~<macroname> < macro text>CHANGE~
DELETE <macroname>---~
LlST- - - r -- - - . -- - ---'
< macro name>
System DDT syntax:
MACROON---_~
MAll
Writes messages to the MAIL file.
Syntax:
MAIL--,- -- - ---,--,---__________ _
L
< identifier>-.J L<
message string> _J
-3-
MAKE
Changes certain station attributes.
Workstation and remote OOT syntax:
MAKE
- ' 1 -'-
I--No-T-~--'--SCROLL REVERSEL
SIGNAL < character> - - - ' Controller syntax:STATION <station name>J
LNOT~
LCON---lMAKE
_~ <Isn>
-I T READY-,---j- - SIGNAL <character> 0.- - - - - -
1
--1SCROLLREVERSE---~
NOT System OOT syntax:
MAKE
~~---'-r- LSTATlON ~
L<station < Isn >name >~ - ,-,---,-'C-
L NOTJREAD~
CONDDT
MOVE
Reroutes messages from one station to another station.
Controller and system OOT syntax:
MOVE1<num~be,> L
J
<Isn> >-ALL FROM LSTATIONJ
L-< station name >~
ONE
>--~TO - , - - - ,, - < dest lsn > - - - - ,- - -_
L STATION
=-oJ
L<dest name>==:]NEWS
Displays or changes the news message.
Workstation and controller syntax:
~EWS---~
Remote DDT and system DDT syntax:
~EWS--,c=---r---~
C;
news message>=J
PASS
Requests a function of a program without signing on to the program.
Workstation, remote DDT, and controller syntax:
PASS < program·id > < data string> - - - -- -
PASSWORD
Sets or resets the COBOL 74 password.
System ODT syntax:
pAS~O RD
----c
~ password>=y-
READY
Makes a station ready.
Syntax:
READY ---,,--< Isn > - - - , - -- - - 1 L < station name
>~
-4-
~J...r(
•
REMOVE
Removes messages from a station.
Controller and system DDT syntax:
A EMOVE
t <
number>-
ALL~
ONE
>>---~--< Isn > ,
L <
station name> ~
REPORT
Displays information on the status of a station or stations.
Syntax:
~EPORT----,---~---~
- -- - ALL ---1
SEND
Sends a message to the specified stations.
Syntax:
SEND-r---.-,-,---,~r_
< usercode >- - -- - - -- - - --1
<
identifier>-_____ ____
~>>-- - T - - - ' - - < message. string > - - -- - - -- - ---i L .-.-J
SIGN OFF
Detaches a user from a program.
Workstation, remote DDT, and controller syntax:
< signal character> - - T -- --,----OFF---,- - -- - - , - -- - - - -
L SIGN
-.J
L CLEAR-.-JSIGN ON
Attaches a user to the specified program.
Workstation, remote DDT, amd controller syntax:
SIGNAL
< program-id > ~
L<jOb nUmber > ~
L<string>JChanges the SMCS signal character for all stations.
Controller and system DDT syntax:
SIGNAL < signal character >-- -______ ___ -1
·5·
STATUS
Displays the current status of a station. program, or remote file.
Syntax:
STATUS-.---r-r---,-~--~
STOP
STATION < usercode > - - ----I
< identifier> - - - --
< station name>
<Isn >---~
PROGAAM~<program name>
--T-
L < job number>
F I LE~' --- - - , -< remote file name>
L<
remote file number>Terminates the SMC$ program in an orderly manner.
System DDT syntax:
STOP'- -- - - -- -- - - -- - - -
SYSTEM
Displays information on the SMCS version, translate option, and system Hostname.
and changes the translate option.
Workstation syntax:
SYSTEM - TC- - - --- - - r - -- -- - - -- ---t TRANSLATE
-~
VERSION~
Remote DDT and system DDT syntax:
SYSTEM--T---r---~
t TRANSLATEt~~F ~
VERSION- - - - -- -- ---'
TABS
Sets the tab stops on a terminal.
Syntax:
< start col> +
<
increment> - - -- ----' TERMINATETerminates a step macro procedure.
Workstation, remote DDT, and controller syntax:
TERMINATE--- - - -- - -- - ---j
·6·
TRACE
Invokes the SMCS tracing facilitie.;.
Controller and system COT syntax:
TRACE
---,---ON~-,---
DISK OFF MARK LIST
TRANSLATE
Sets or resets the translate option for a station.
Workstation, remote GOT, and controller syntax:
TRANSLATE---,c==---~---,---4
L~~F~
USER
Logs a user on to the SMCS program.
Workstation, remote DDT, and controller syntax:
~E R < usercode!password >--,---,---_4
L<
command string>- - - JL ( <
macro procedure> I~
ZIP
Spawns an unsecured Mep control string.
Remote DDT syntax:
liP
Y L <
MC=;:ntrO[ instruction>~---,--L---_4
I < macro procedure> 1 ~
? < Mep control instruction>
Spawns a secured Mep control string.
Workstation, remote DDT, and controller syntax:
- - - ---,----rL--
rL - <
MCP control instruction>---,
1--L---_4?
~
[<
macro procedure> I---.J-7-
NOTES
-8-