Local Nuclear Magnetic Resonance Spectroscopy with Giant Magnetoresistive Sensors

This method significantly improves the detection of cracks of two different kind of material (non magnetic conductive material and ferromagnetic material). The magnetic flux

We have used a 2D numerical model based on the Finite Element Method (FEM) to simulate the NDT inspection process and to predict the corresponding signal sensed by the GMR

Hence, the purpose of the study is to develop an equivalent set up associated to a matched resonant loop dedicated to magnetic field measurements, where a Ti:LiNbO 3 waveguide

Of the three steps in the outline, the Enumerating and Evaluating steps can be realized as mechanical operations, so they are done automatically by the OPN kernel. The

The complexes of NF-␬B p50 with NF1, NF2, and NF3 nucleosomes and NF1, NF2, and NF3 naked DNA were irradiated with a single high intensity (H) UV laser pulse or multiple low

Classically, a Poisson process with drift was used to model the value of an insurance company and in that case, under some assumptions on the parameters of the process, the

2, but we now train the classifiers with the feature value approximations obtained from one sampling strategy, and we track the classification accuracy when tested with feature

L’accès à ce site Web et l’utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D’UTILISER CE SITE WEB.