• Aucun résultat trouvé

The Super Separator Spectrometer (S$^3$) for the SPIRAL2 facility

N/A
N/A
Protected

Academic year: 2021

Partager "The Super Separator Spectrometer (S$^3$) for the SPIRAL2 facility"

Copied!
7
0
0

Texte intégral

Loading

Figure

Table 1. Main characteristics of the S 3  line. (*)Mass resolution is given for  an initial distribution of σ θ =20mrad, σ p =3.4%
Figure 3: Photograph of the S 3  experimental area

Références

Documents relatifs

arbitrarily sensitive to a uniform magnetic field by simply increasing the area of the superconducting ring.. PRINCIPLE OF THE

Dans le cadre de réunions avec l’équipe de l’urgence, plusieurs problèmes ont été soulevés par le personnel soignant, notamment la rédaction en langue française du

x Activates a fast beam cut through the use of the low energy beam line slow chopper. It receives the alarms from all the beam diagnostics, like loss rings and sleets, beam

The ACCT chain is faster with a response time less than 1 µS (bandwidth more than 300 kHz) and an intensity accuracy better than 10 µA but it needs a chopped beam..

SPIRAL2 is major expansion of the SPIRAL facility at GANIL, which will help maintain European leadership in ISOL (Isotope separation on line) development, aiming at two orders

Decay spectroscopy after separation will be performed at the focal plane using an array known as SIRIUS (Spec- troscopy and Identification of Rare Ions Using S 3 ). The first

Dans la première étude (A), composée de trois expérimentations, nous présentons l’influence de la texture, en l’absence de contact tactile, sur l’attitude

It can be observed from Figure 7 that more than 98% of soluble Cu can be selectively precipitated at a copper sulfide molar ratio 1:3 (100 ppm ferric sulfate leachate).. But, a