• Aucun résultat trouvé

Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples

N/A
N/A
Protected

Academic year: 2021

Partager "Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples"

Copied!
8
0
0

Texte intégral

Loading

Références

Documents relatifs

General Conclusions and Perspectives .... Principle of molecular imprinting via covalent interactions, as shown by Wulff and Sarhan, 1972. Reproduced from Andersson

Except the leak of the template molecule (NOR) from the MIP (3 ng) observed in the elution fraction, no targeted compounds were detected in non-spiked Evian water. The

The polymerization route specificities for the production of miniaturized molecularly imprinted polymers in capillaries or chip channels such as open tubular, packed

recoveries of 100% with a SD of 8% on the MIP and of 64% with a SD of 11% on the NIP. To 

Selective tools for the solid-phase extraction of Ochratoxin A from various complex samples: immunosorbents, oligosorbents, and molecularly imprinted polymers... Analytical

Therefore, in this paper we show that the combination of the amperometric biosensor and extraction step using molecularly imprinted polymer allows the selective detection

Figures 3.1 (a-d) show the results of uploading to the MIPs and NIPs thin films expressed in terms of the peak area of analyte normalized to the peak area of internal

samples were analyzed by EPA Method 525, with some adaptations. Initially, because the concentration of hydrocarbons in the sample was unknown, a full-scale experiment was