• Aucun résultat trouvé

Monitoring wear with integrated ultrasonic transducers for predictive maintenance in mining

N/A
N/A
Protected

Academic year: 2021

Partager "Monitoring wear with integrated ultrasonic transducers for predictive maintenance in mining"

Copied!
2
0
0

Texte intégral

Loading

Références

Documents relatifs

A double stub matching network with electronically controlled tuning stubs is under development for the lower hybrid current drive (LHCD) system on Alcator C-Mod [3, 4]..

Several studies have investigated different techniques for assessing workflow similarity using this structure [7], [8], [6], [9], [10], [11], [12], but initial results indicate

De la même façon dans le recueil de Léo Lamarche Sale temps pour vivre, précédé d’un avertissement soulignant la dureté de certaines scènes dans le livre et incitant

This paper presents a critical review on the machining of TiMMCs with focus on tool wear mechanisms, material removal and chip formation mechanisms, and machined surface quality

University of Alberta, Edmonton, Alberta, Canada, Simon Fraser University, Burnaby, British Columbia, Canada, York University, Toronto, Ontario, Canada, and McGill University,

Trends in intercepted PAR radiation by the crop and thermal comfort indices were interpreted for the different agricultural systems and climate scenarios, taking into account

after 60 min. The heat flux values measured by the heat flux meters installed on the mast are shown in Figure 11.. Average Room and Window Opening Temperatures... Temperatures

A Maxwell’s fisheye lens, 30 on the other hand, is a kind of GRIN lens that can focus the wave from a point source on the edge of the lens to another point on the opposite edge of