• Aucun résultat trouvé

Sliding Mode Control Based Bacterial Foraging Optimization of Wind Energy Conversion Systems

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "Sliding Mode Control Based Bacterial Foraging Optimization of Wind Energy Conversion Systems"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

The 4

th

International Conference on Welding, Non Destructive Testing, Materials and Alloys Industry (IC-WNDT-MI’14)

Sliding Mode Control Based Bacterial Foraging Optimization of Wind Energy Conversion Systems

Sami Kahla1, 3, Youcef Soufi2, Moussa Sedraoui3, Boutaghane Amar1,Boubakr Boussiala1, Thelaidjia Tawfik1

1Welding and NDT Research Center (CSC), BP. 64, Cheraga, Algiers, Algeria

2Labget Laboratory, Department of Electrical Engineering, University of Tebessa, Algeria

3Laboratory of Electrical Engineering University 08 Mai 1945, Guelma

[email protected],[email protected],[email protected],[email protected],

[email protected],t[email protected].

Abstract— in recent years, the energy production by wind turbines has been increasing, because its production is environmentally friendly. In this paper, Bacterial Foraging Optimization (BFO) is proposed to generate a Sliding Mode Controller. The Sliding Mode Control (SMC) is proposed to control a squirrel-cage induction generator (SCIG) in order to maximize power captured by wind energy conversion system applied to the welding system. Simulation studies are made with Matlab / Simulink to verify the effectiveness of the purposed method.

Keywords

—

Squirrel Cage Induction Generator (SCIG), Wind Energy Conversion System (WECS), Sliding Mode Control (SMC), Bacterial Foraging Optimization (BFO), Welding System.

Références

Télécharger maintenant ( PDF - 1 Page - 143.54 KB )

Documents relatifs

Second-Order Sliding Mode Control of a Doubly Fed Induction Generator Driven Wind Turbine

Therefore, using robust control, such as the second-order sliding mode, will allow one to directly track the DFIG torque leading to maximum power extraction.. Moreover, the

Sliding Mode Power Control of Variable-Speed Wind Energy Conversion Systems

The main advantages of the proposed sliding mode power control strategy, according to the available literature [7], [8], [12], [15], [17] are: simplicity and robustness

High-Order Sliding-Mode Control of Variable-Speed Wind Turbines

Indeed, the proposed solution to the problem of wind turbine maximum power point tracking (MPPT) control strat- egy relies on the estimation of the aerodynamic torque using a

High-Order Sliding Mode Control for DFIG-Based Wind Turbine Fault Ride-Through

Simulations using the NREL FAST code on a 1.5-MW wind turbine are carried-out to evaluate ride-through performance of the proposed HOSM control strategy in case of grid frequency

High-Order Sliding Mode Control of a Marine Current Turbine Driven Doubly-Fed Induction Generator

Index Terms—Doubly-fed induction generator (DFIG), high-order sliding mode (HOSM), marine current turbine (MCT), modeling, nonlinear controlM.

Sensorless Control of Doubly-Fed Induction Generator-Based Wind urbines using a High-Order Sliding Mode Observer

Sensorless Control of Doubly-Fed Induction Generator-Based Wind urbines using a High-Order Sliding Mode Observer... Sensorless Control of Doubly-Fed Induction Generator-Based Wind

Wind Sensorless Control of Wind Energy Conversion System with PMS Generator

‘MPPT for PM wind generator using gradient approximation’, Energy Conversion and Management 50 (1), pp. ‘Maximum power point tracker of wind energy conversion system’,

Adaptive Nonlinear Control of Wind Energy Conversion System with PMS Generator

The nonlinear multi-loop (speed, current, voltage) controller thus obtained is formally shown, using Lyapunov stability, to meet its control objectives. Several