• Aucun résultat trouvé

FAULT DETECTION AND DIAGNOSIS IN ROTATING MACHINERY BY VIBRATION MONITORING USING FFT AND WAVELET TECHNIQUES

N/A
N/A
Info
Télécharger
Protected

Academic year: 2021

Partager "FAULT DETECTION AND DIAGNOSIS IN ROTATING MACHINERY BY VIBRATION MONITORING USING FFT AND WAVELET TECHNIQUES"

Copied!
1
0
0

Chargement.... (Voir le texte intégral maintenant)

Texte intégral

(1)

2013 8th International Workshop on Systems, Signal Processing and their Applications (WoSSPA) 2013

FAULT DETECTION AND DIAGNOSIS IN ROTATING MACHINERY BY VIBRATION MONITORING USING FFT AND WAVELET

TECHNIQUES

Issam ATOUI, Hazem MERADI, Ramzi Boulkroune, Riad Saidi, Azzeddine GRID

Abstract : Rotor unbalance is the most cause of machine vibration that reduces the life of the rotating machine. On the other hand, vibration monitoring is reported as an interesting technique for the rotating machinery condition diagnosis.This paper considers the Wavelet Transform (WT) and FFT of vibration signals for detect and diagnose of unbalance faults in rotating machinery. The fault condition and location of faults are success fully detected by WT-FFT for non-stationary vibration measurements obtained from accelerometer sensors. Experimental studies on the rotating machine include faulty rotor with different rotational speeds has been carried out in this paper. These experimental results confirm that WT-FFT serves as a good tool to online faults detection and diagnosis of rotating machines.

Keywords : Rotor unbalance, fault detection and diagnosis, Rotating machinery, WAVELET TECHNIQUES

Centre de Recherche en Technologies Industrielles - CRTI - www.crti.dz

Powered by TCPDF (www.tcpdf.org)

Références

Télécharger maintenant ( PDF - 1 Page - 7.86 KB )

Documents relatifs

FAULT DIAGNOSIS OF ROTATINGMACHINERY USING WAVELETTRANSFORM AND PRINCIPALCOMPONENT ANALYSIS

In this paper, fault diagnosis of rotating machinery is performed using a combination between Wavelet Transform (WT) and Principal Component Analysis (PCA) methods.. The WT is

Hocine Bendjama

In this paper, fault diagnosis of rotating machinery is performed using a combination between Wavelet Transform (WT) and Principal Component Analysis (PCA) methods. The

VIBRATION MONITORING FOR FAULTDIAGNOSIS IN ROTATING MACHINERYUSING WAVELET TRANSFORM

Abstract: Vibration analysis is essential in improving condition monitoring and fault diagnostics of rotating machinery.. Many signal analysis methods are able to extract

VIBRATION MONITORING FOR FAULT DIAGNOSIS IN ROTATING MACHINERY USING WAVELET TRANSFORM

Vibration analysis is essential in improving condition monitoring and fault diagnostics of rotating machinery.. Many signal analysis methods are able to extract useful information

Application of Wavelet Transform for Fault Diagnosis in Rotating Machinery

The measurement of vibration applied to condition monitoring and fault diagnosis requires different types of equipment and techniques. These depend on the investment and

VIBRATION SIGNAL ANALYSIS USING WAVELET-PCA-NN TECHNIQUE FOR FAULT DIAGNOSIS IN ROTATING MACHINERY

In this paper, a new combined fault diagnosis method that uses Wavelet Transform (WT), Principal Component Analysis (PCA) and Neural Networks (NN) is proposed

Combination between STFT and DWT for FaultDetection and Diagnosis in Rotating Machineryby Vibration Monitoring

Abstract : Signal analysis with fixed time-frequency resolution, such as the Short-Time Fourier Transform(STFT), is a common tool for many industrial applications in rotating

R Combination between STFT and DWT for Fault Detection and Diagnosis in Rotating Machinery by Vibration Monitoring

The physical motion of rotating machines generates vibration and with the advances in digital signal processing research, there has been an increasingly strong