IBM System/360 Operating System Master Index

(1)

Systems Reference Library

IBM System/360 Operating System Master Index

This publication consolidates the indexes of publications in the IBM systems Reference Library for the system/360 Operating System. It also pro- vides a reading plan for these publications.

The master index lists topics alphabetically, and refers to publications where these topics are discussed. The indexes of these publications list the same topics and refer to specific pages .•

File No. S360-20

OS

Form C28-6644-2

(2)

Third Edition <October 1968)

This publication corresponds to Release 15/16. It is a major revision of Form C28-6644-1, which is now obsolete.

The contents of this publication are subject to change from time to time. Changes will be reflected in periodically updated editions. Before using this publication, consult the latest IBM 360 SRL Newsletter, Form N20-0360, for the editions that are applicable and current.

Requests for copies of IBM publications should be made to your IBM representative or to the IBM branch office serving your locality_

A form is provided at the back of this publication for reader's comments. If the form has been removed, comments may be addressed to IBM Corporation, Programming Systems Pub- lications, Department D58" PO Box 390, Poughkeepsie,

N. Y. 12602

(3)

READING PLAN FOR THE SYSTEMS REFERENCE LIBRARY IBM SYSTEM/360 OPERATING SYSTEM

(4)

I ntro- d uction

• • _•

• •

o

• •

Concepts •

and •

Facilities •

o •

REA::J:::XG P:::"A~~ FOR :'HE SYS7EHS REFERE~~CE LIBRARY 13J:v1 SYSJ:'EM/36 C OPERN':'ING SYSTEM

Report

Pr~ram

Generator

• •

Principles •

of •

Operation •

• o

• •

• BTAM a;1d

(5)

This master index is provided to help you loc- ate information in the Systems Reference Library for the System/360 Operating System. It lists topics alphabetically, and refers you to publications where these topics are discussed. The indexes of these publications refer you to the appro- pl7iate pages.

TOpics are from indexes of publications listed on the following page. Entries in the master index refer to these publications by title, subject code, and form number. For example:

Access techniques

in CONCEPTS AND FACILITIES 20 C28-6535

TitleJ

I ^r

Subject code - - - ' Form number---~-

A form number identifies a specific publication; a subject code indicates general subject matter.

Subject codes in the master index are as follows:

Subject Code 01 20 21 24 25 26 28 29 30 31 32 33 36 37

Subject

Machine System

Programming Systems -- General Assembler

COBOL FORTRAN ALGOL

Report Program Generator PL/I

Input/Output Control System, Data Management

System Service programs utility Programs

Sort/Merge Control Program

Automatic Testing Programs Each subject code is part of a file number, which identifies the system to which a publication ap- plies. For exatmple:

File Number S360-36 S360/1130-36

System

IBM System/360 IBM System/3 60,

IBM 1130 System

Subject

Control Program control Program

Libraries usually file publications by file number, that is, by system and subject code; publications for the Bame system and subject are filed by form number.

If an index entry appears in several publications, the mas1:er index refers to each publication and lists subentries separately for each:

Access techniques

in CONCEPTS AND FACILITIES

in SUPERVISOR & DATA MGT. SERVICES basic

queued

PREFACE

20 C28-6535 36 C28-6646

The subentries "basic" and "queued" appear under

"Access techniques" in Supervisor and Data Manage- ment Services; no subentries appear in Concepts and Facilities.

The master index includes index entries from many publications, and therefore includes many entries that are similar. To reduce redundancy, entries beginning with the same word are grouped, as in the following example:

Hyphen

in COBOL (E) PROGRAMMER'S GUIDE Hyphens

in COBOL LANGUAGE Hyphens, use of

in UTILITIES

24 C24-5029 24 C28-6516 32 C28-6586 Each entry begins with a form of the word hyphen, which is underscored the first time i t appears. A blank line separates each group of similar

entries.

Note that index entries may be either singular (Hyphen) or plural (Hyphens). Singular and plural entries for the same topic do not always appear close together. For example, "Call" and "Calls"

are separated by "Called" and "Calling." You should therefore look for topics in both singular and plural form, and should note that verb forms

<Called, Calling) may differ in entries taken from different publications.

As in a dictionary, each page of the master index is tabbed with the first letter of entries appearing on the page. The first and last entries on each page are indicated in a heading, where each is represented by its first word. The first word of the first entry appears on the left, and the first word of the last entry appears on the right. These two words are underscored in the entries where they first appear.

Note: A reader's survey form is attached to the back cover. Please use this form for comments regarding the content, arrangement, and tabbing of this publication.

(6)

REFERENCES - - - - -

The master index refers to most of the publications in the Systems Reference Library for the system/360 Operating System. For a list of all operating system publications, refer to the IBM System/360 Bibliography, Form A22-6822. ---

Entries in the master index refer to publications by title, partial file number (subject code), and form number. Long titles are shortened to save space, and form numbers are shortened to eliminate suffixes (revision numbers). Complete titles, file numbers, and form numbers are as follows:

IBM 8ystem/360 Principles of

Operation •••••••••••••••••••• S360-01, A22-6821-6

IBM 8ystem/360 Operating System and 1130 Disk Monitor System:

FORTRAN IV Subroutines for Data Transmission Between a 8ystem/360 and an 1130 System--Preliminary

Specifications •••••••••••• S360/1130-36, C27-3937-0 User's Guide for Job Control

from an IBM 2250 Display unit Attached to an IBM 1130 System--Preliminary

specifications •••••••••••• S360/1130-36, C27-6938-0 IBM System/360 operating System:

ALGOL Language ••••••••••••• S360-26, C28-6615-1 ALGOL Programmer's Guide ••• 8360-26, C33-4000-0 Assembler (E) Programmer's

Guide ••••••••••••••••••••• S360-21, C28-6595-1 Assembler (F) Programmer's

Guide ••••••••••••••••••••• S360-21, C26-3756-2 Assembler Language ••••••••• S360-21, C28-6514-5 Basic FORTRAN IV Language •• S360-25, C28-6629-1 Basic Telecommunications

Access Method ••••••••••••• 8360-30, C30-2004-1 Checkpoint/Restart ••••••••• S360-31, C28-6656-2 COBOL (E) Programmer's

Guide ••••••••••••••••••••• S360-24, C2~-5029-2

COBOL (F) Programmer's

Guide ••••••••••••••••••••• S360-24, C28-6380-2 COBOL Language ••••••••••••• S360-24, C28-6516-7 concepts and Facilities .•• , •• S360-20, C28-6535-2 FORTRAN IV (E) Programmer's

Guide ••••••••••••••••••••• S360-25, C28-6603-2 FORTRAN IV (G) Programmer's

Guide .•••••••••••••••••••• S360-25, C28-6639-1 FORTRAN IV (H) Programmer's

Guide ••••••••••••••••••••• S360-25, C28-6602-2 FORTRAN IV Language •••••••• S360-25, C28-6515-6 FORTRAN IV Library

Subprograms •••••• , •••••••• ~ S360-25, C28-6596-3

Graphic Programming Services For:

FORTRAN IV •••••••••••••• S360-25, C27-6932-2 IBM 2250 Display Unit ••• S360-30, C27-6909-4 IBM 2260 Display Station

(Local Attachment) ••••• S360-30, C27-6912-5 IBM 2280 and 2282 Film

Units •••••••••••••••••• S360-30, C27-6927-1 Guide to Model 91 Support •• S360-32, C28-6666-0 Introduction ••••••••••••••• S360-20, C28-6534-1 Job Control Language ••••••• S360- 36, C28-6539-7 Linkage Editor ••••••••••••• S360-31, C28-6538-5 Maintenance Program

360-UT-506 •••••••••••••••• S360-31, C27-6918-0 Messages and Codes ••• a • • • • • S360-20, C28-6631-5 Model 65 Shared Main

Storage Multiprocessing--

Preliminary Description ••• S360-20, C28-6671-0 On-Line Test Executive

Program ••••••••••••••••••• S360-37, C28-6650-0 Operator's Guide ••••••••••• S360-20, C28-6540-7 PL/I Programmer's Guide •••• S360-29, C28-6594-3 PL/I Reference Manual •••••• S360-29, C28-8201-1 PL/I Subroutine Library

Computational Subroutines. S360-29, C28-6590-1 Planning for Multiprogram-

ming With A Fixed Number of

Tasks, Version II (MFT II) S360-36, C27-6939-3 Planning for Remote Job

Entry (MFT Version II) •••• S360-36, C30-200S-0 Programmer's Guide to De-

bugging ••••••••••••••••••• S360-20, C28-6670-0 Queued 'Telecommunications

Access Method:

Message Control program. S360-30, C30-2005-1 Message Processing Pro-

gram Services •••••••••• S360-30, C30-2003-1 Remote Job Entry •.• , ••.••••••• S360-36, C30-2006-1 Report Program Generator

Language •••••••••••••••••• S360-2S, C24-3337-1 Sort/Merge Program ••••••••• S360-33, C28-6543-4 Sort/Merge Timing Estimates S360-33, C28-6662-0 Sort/Merge Timing Estimates for

the 2420 Model 7 Magnetic

Tape Unit--Planning Guide. S360-33, C2S-6668-0 Storage Estimates •••••••••• S360-20, C28-6551-6 Supervisor and Data Man-

agement Macro Instructions S360-36, C28-6647-2 Supervisor and Data Man-

agement Services •••••••••• S360-36, C2S-6646-1 System Control Blocks •••••• S360-36, C2S'-662S-2 System Generation •••••••••• S360-31, C2S-6554-4 System Programmer's Guide .•• S360-20, C28·-6550-4 Tape Labels •••••••••••••••• S360-30, C28-6680-0 TESTRAN •••••••••••••••••••• S360-37, C28-6648-0 User's Guide for Job Control From

the IBM 2250 Display Unit. S360-36, C27-6933-1 Utilities •••••••••••••••••• S360-32, C2S-·6586-S

(7)

(Special Characters)

in ALGOL LANGUAGE in ALGOL LANGUAGE

. ,

in ALGOL LANGUAGE in ALGOL LANGUAGE

( )

in ALGOL LANGUAGE (/ /)

in ALGOL LANGUAGE +

in ALGOL LANGUAGE

&

in JOB CONTROL LANGUAGE

&&name

&END statement

in FORTRAN IV LANGUAGE

&SYS, restrictions on use in ASSEMBLER LANGUAGE

&SYSECT

in ASSEMBLER LANGUAGE

&SYSLIST

&SYSNDX

*

in ALGOL LANGUAGE

* parameter in the DD statement in JOB CONTROL LANGUAGE

***,identifying characters in JOB CONTROL LANGUAGE in ALGOL LANGUAGE / ' / '

in ALGOL LANGUAGE /*,identifying characters

in JOB CONTROL LANGUAGE //*,identifying characters

in JOB CONTROL LANGUAGE //,identifying characters

in JOB CONTROL LANGUAGE in ALGOL LANGUAGE in ALGOL LANGUAGE

,

( ' ' ) '

in ALGOL LANGUAGE 'AND'

in ALGOL LANGUAGE 'and' operator

in PL/I SUBROUTINE LIBRARY 'ARRAY'

in ALGOL LANGUAGE 'BEGIN'

in ALGOL LANGUAGE 'BOOLEAN'

in ALGOL LANGUAGE 'CODE'

in ALGOL LANGUAGE 'COMMENT'

in ALGOL LANGUAGE 'DO'

in ALGOL LANGUAGE 'ELSE'

in ALGOL LANGUAGE 'END'

in ALGOL LANGUAGE 'EQUAL'

in ALGOL LANGUAGE

1

26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 36 C28-6539 36 C28-6539 25 C28-6515 21 C28-6514 21 C28-6514 21 C28-6514 21 C28-6514 26 C28-6615 36 C28-6539 36 C28-6539 26 C28-6615 26 C28-6615 36 C28-6539 36 C28-6539 36 C28-6539 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 29 C28-6590 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615

'EQUIV'

in ALGOL LANGUAGE 'FALSE'

in ALGOL LANGUAGE 'FOR'

in ALGOL LANGUAGE 'GOTO'

in ALGOL LANGUAGE 'GREATER'

in ALGOL LANGUAGE 'IF'

in ALGOL LANGUAGE 'IMPL'

in ALGOL LANGUAGE 'INTEGER'

in ALGOL LANGUAGE 'LABEL'

in ALGOL LANGUAGE 'LESS'

in ALGOL LANGUAGE 'NOT'

in ALGOL LANGUAGE 'not' operator

in PL/I SUBROUTINE LIBRARY 'NOTEQUAL'

in ALGOL LANGUAGE 'NOTGREATER'

in ALGOL LANGUAGE 'NOTLESS'

in ALGOL 'LANGUAGE 'OR'

in ALGOL LANGUAGE 'or' operator

in PL/I SUBROUTINE LIBRARY 'POWER'

in ALGOL LANGUAGE 'PROCEDURE'

in ALGOL LANGUAGE 'REAL'

in ALGOL LANGUAGE 'STEP'

in ALGOL LANGUAGE 'STRING'

in ALGOL LANGUAGE 'SWITCH'

in ALGOL LANGUAGE 'TRUE'

in ALGOL LANGUAGE 'UNTIL'

in ALGOL LANGUAGE 'VALUE'

in ALGOL LANGUAGE

"not" operation

in PL/I REFERENCE MANUAL

"not" symbol

"or" operation

"or" symbol

"Popped-up" environment in PL/I REFERENCE MANUAL

"Popped-up" stack

·Popped-up" storage

"Pushed-down" environment in PL/I REFERENCE MANUAL

"Pushed-down" stack

"Pushed-down" storage in PL/I REFERENCE MANUAL

(Special Characters)

26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28- 66¹.5 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 29 C28-6590 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 29 C28-6590 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 26 C28-6615 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201 29 C28-8201

(8)

A

m

~, device class

in .FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in .FORTRAN IV (H) PROG. GUIDE A (device class name)

in COBOL (F) PROGRAMMER'S GUIDE A (Device Type)

in COBOL (E) PROGRAMMER'S GUIDE A (PICTURE character) 50

in COBOL LANGUAGE A format code

in BASIC FORTRAN IV LANGUAGE in FOR~~N IV LANGUAGE a specification

in BASIC FORTRAN IV LANGUAGE A-type address constant

in LINKAGE EDITOR

Abbreviated names of compiler options in PL/I PROGRAMMER'S GUIDE

Abbreviations, command in OPERATOR'S GUIDE

MFT MVT PCP

Abbreviations, list of

in PROGRAMMER'S GUIDE TO DEBUGGING Abbreviations for ON conditions

in PL/I PROGRAMMER'S GUIDE ABEND dump

in FORTRAN IV (E) PROG. GUIDE in FOR'I'RAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE ABEND dumps

in PROGRAMMER'S GUIDE TO DEBUGGING contents of (MVT)

contents of (PCP,MFT) guide to using (MVT) guide to using (PCP,MFT) how to invoke (MVT) how to invoke (PCP,MFT) introduction to

samples of (MVT) samples of (PCP) ABEND macro instruction

in PROGRAMMER'S GUIDE TO DEBUGGING in SUPERVISOR'& DATA MGT. MACROS in SUPERVISOR & DATA MGT. SERVICES ABNORMAL attribute

in PL/I PROGRAMMER'S GUIDE Abnormal conditions

in SUPERVISOR & DATA MGT. SERVICES detection and "processing

Abnormal end

in SYSTEM PROGRAMMER'S GUIDE Abnormal end (ABEND)

in GRAPHIC PROG. SERVICES (2250) Abnormal end appendage

in SYSTEM PROGRAMMER'S GUIDE Abnormal t.ask termination

in MODEL 65 MULTIPROCESSING Abnormal termination

in GRAPHIC PROG. SERVICES (FORTRAN) effect of null variable

with CANCEL key attention in SUPERVISOR & DATA MGT. MACROS in SUPERVISOR & DATA MGT. SERVICES

25 C28-6603 25 C28-6639 25 C28-6602 24 C28-6380 24 C24~5029

24 C28-6516 25 C28-6629 25 C28-6515 25 C28-6629 31 C28-6538

29 C28-6594 20 C28-6540

20 C28-6670 29 C28-6594

25 C28-6603 25 C28-6639 25 C28-6602 36 C28-6539 20 C28-6670

20 C28-6670 36 C28-6647 36 C28-6646

29 C28-6594 36 C28-6646 20 C28-6550 30 C27-6909 20 C28-6550 20 C28-6671 25 C27-6932 36 C28-6647 36 C28-6646

2 __________________________________ __

detection

from DEQ macro instruction from ENQ macro instruction from program interruption routine

ABSTR

in USER'S GUIDE: JOB CTRL 2250 36 C27-6933 definition of

messages describing Abnormal termination, cause of

in PROGRAMMER'S GUIDE TO DEBUGGING 20 C28-6670 in an ABEND/SNAP dump (MVT)

in an ABEND/SNAP dump (PCP,MFT) Abnormal termination, definition of

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 Abnormal termination, incomplete

in COBOL (F) PROGRAMMER'S GUIDE 24 C28-6380 Abnormal termination dump

in COBOL (F) PROGRAMMER'S GUIDE 24 C28-6380 discussion

errors that can cause job control statement for use of

in SUPERVISOR & DATA MGT. MACROS in SUPERVISOR & DATA MGT. SERVICES Abnormal Termination Dumps

in COBOL (E) PROGRAMMER'S GUIDE Abnormal termination dumps

in GRAPHIC PROG. SERVICES (FORTRAN) in PROGRAMMER'S GUIDE TO DEBUGGING Abnormal termination with SMC

ABS

in SYSTEM PROGRAMMER'S GUIDE

in ALGOL LANGUAGE

in PL/I SUBROUTINE LIBRARY complex fixed-point complex floating-point

Absent parameters and subparameters in JOB CONTROL LANGUAGE

Absolute compare routine

36 C28-6647 36 C28-6646 24 C24-5029 25 C27-6932 20 C28-6670 20 C28-6550

26 C28-6615 29 C28-6590

36 C28-6539

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337 Absolute data

in GRAPHIC PROG. SERVICES (FORTRAN) 25 C27-6932 definition of

setting input mode setting output mode Absolute error

in FORTRAN IV LIBRARY SUBPROGRAMS Absolute expressions

in ASSEMBLER LANGUAGE Absolute format

in GRAPHIC PROG. SERVICES (2280-82) Absolute generation names

in SUPERVISOR & DATA MGT. SERVICES Absolute mode

in GRAPHIC PROG. SERVICES (2250) in GRAPHIC PRO G.. SERVICES (2280-82) Absolute terms

in ASSEMBLER LANGUAGE Absolute track address

in SYSTEM PROGRAMMER'S GUIDE Absolute value

in FORTRAN IV LIBRARY SUBPROGRAMS Absolute vectors

in GRAPHIC FROG. SERVICES (2250) ABSTR

in COBCL (F) PROGRAMMER'S GUIDE ABSTR subparameter

in FOR 'IRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE

25 C28-6596 21 C28-6514 30 C27-6927 36 C28-6646 30 C27-6909 30 C27-6927 21 C28-6514 20 C28-6550 25 C28-6596 30 C27-6909

24 C28-6380 25 C28-6603 25 C28-6639 25 C28-6602 ABSTR subparameter in the SPACE parameter

in JOB CONTROL LANGUAGE 36 C28-6539

(9)

ACCEPT ACCEPT

---rn-COBOL (E) PROGRAMMER'S GUIDE in COBOL LANGUAGE

ACCEPT option on the RECALL frame in USER'S GUIDE: JOB CTRL 2250 in USER'S GUIDE: JOB CTRL 2250-1130 ACCEPT statement

in COBOL (F) PROGRAMMER'S GUIDE Accepting a BEGIN JOB operation

24 C24-5029 24 C28- 6516 36 C27-6933 36 C27-6938 24 C28-6380

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 ACCESS

---rn-COBOL LANGUAGE Access language

in ALGOL PROGRAMMER'S GUIDE Access line

in QTAM MESSAGE CONTROL PROGRAM Access line, defined

in BASIC TELECOMM. ACCESS METHOD Access lines

24 C28-6516 26 C33-4000 30 C30-2005 30 C30-2004 in PLANNING MFT II REMOTE JOB ENTRY 36 C30-2008 in REMOTE JOB ENTRY 36 C30-2006 Access method

in ALGOL PROGRili~ER'S GUIDE in QTAM MESSAGE CONTROL PROGRAM in QTAM MESSAGE PROCESSING SERVICES in SUPERVISOR & DATA MGT. MACROS

macro instructions for

26 C33-4000 30 C30-2005 30 C30-2003 36 C28-6647 in SUPERVISOR & DATA MGT. SERVICES 36 C28-6646

choosing an definition of

in SYSTEM PROGRAMMER'S GUIDE how to request

method option

routines, fUnctions of

Access Method, Basic Telecommunications

20 C28-6550

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 Access method blocks and segments

in SYSTEM CONTROL BLOCKS data control block data event control block data extent block

input/output block Access methods

36 C28-6628

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 BPAM (basic partitioned)

BSAM (basic sequential) QSAH (queued sequential) in CHECKPOINT/RESTART in COBOL LANGUAGE in PLANNING FOR MFT II

QSAM

in STORAGE ESTIMATES

dynamic main storage requirements general

fixed main storage requirements options

in SYSTEM GENERATION generation of

graphics programming services resident

Access techniques

31 C28-6656 24 C28-6516 36 C27-6939 20 C28-6551

31 C28-6554

in CONCEPTS AND FACILITIES 20 C28-6535 in SUPERVISOR & DATA MGT. SERVICES 36 C28-6646

basic queued

Access to main storage, right of in PRINCIPLES OF OPERATION Accessibility of secondary storage

in MODEL 65 MULTIPROCESSING Accessing data

01 A22-6821 devices

in CONCEPTS AND FACILITIES Accessing data sets

in PL/I PROGRAMMER'S GUIDE RECORD data sets

20 C28-6671 20 C28-6535 29 C28-6594

3 ACCT

STREAM data sets

Accessing Direct or Relative Organization in COBOL (E) PROGRAMMER'S GUIDE 24 C24-5029

E

, Additions

Differences

Accessing Indexed Sequential Data Sets in COBOL (E) PROGRAMMER'S GUIDE

Additions Differences

Accessing Information Not Directly in COBOL (E) PROGRAMMER'S GUIDE Accessing unused space

in FOR'IRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Account Number

in COBQL (E) PROGRAMMER'S GUIDE Account number

in COBOL (F) PROGRAMMER'S GUIDE for JOB statement

for EXEC statement

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Account number in the JOB statement

in JOB CONTROL LANGUAGE ACCOUNT parameter on the LOG ON

in USER'S GUIDE: JOB CTRL 2250 ACCOUNT parameter on the LOG ON frame

in USER'S GUIDE: JOB CTRL 2250-1130 Accounting .data set writer

in SYS~EM PROGRAMMER'S GUIDE output from

Accounting Information

in COBOL (E) PROGRAMMER'S GUIDE Accounting information

in FOR~RAN IV (E) PROG. GUIDE in the EXEC statement in the JOB statement

in FORTRAN IV (G) PROG. GUIDE in the EXEC statement in the JOB statement

in FORTRAN IV (H) PROG. GUIDE in the EXEC statement in the JOB statement in JOB CONTROL LANGUAGE

in the EXEC statement in the JOB statement in SYSTEM PROGRAMMER'S GUIDE Accounting routine

in USER'S GUIDE: JOB CTRL 2250 use of

writing an Accounting routines

in SYSTEM GENERATION example

in SYSTEM PROGRAMMER'S GUIDE attributes

ACCT

conventions for CSECT name entrances entry points exits

format input to

insertion after system generation insertion at system generation insertion into control program output

preparing for

register conventions sample

in ALGOL PROGRAMMER'S GUIDE

24 C24-5029

24 C24-5029 25 C28-6603 25 C28-6639 25 C28-6602

24 C24-5029 24 C28- 6380

25 C28- 6603 25 C28-6639 25 C28-6602 36 C28-6539 36 C27-6933 36 C27-6938 20 C28-6550 24 C24-5029 25 C28-6603 25 C28-6639

25 C28- 6602 36 C28-6539 20 C28-6550 36 C27-6933

31 C28-6554 20 C28-6550

26 C33-4000

(10)

ACCT (continu~e~d~) __________ _

in COBOL CE) PROGRAMMER'S GUIDE ACCT parameter

in FORTRAN IV CE) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV CH) PROG. GUIDE ACCT parameter in the EXEC statement

in JOB CONTROL LANGUAGE ACCT. procstep

in COBOL eE) PROGRAMMER'S GUIDE ACCT.procsteQ parameter

in FORTRAN IV CE} PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Accumulated data set

~-UTILITIES

Accumulators, error threshold ---rn-BASIC TELECOMM. ACCESS METHOD

Accur~~, timing

in SUPERVISOR & DATA MGT. SERVICES Accuracy statistics

in FORTRAN IV LIBRARY SUBPROGRAMS ACK-O, ACK-1

in BASIC TELECOMM. ACCESS METHOD

Ackno~ledqements

in BASIC TELECOMM. ACCESS METHOD ACSMETl! operand

in BASIC TELECOMM. ACCESS METHOD Action in error condition

---rn-LINKAGE EDITOR Action indicator

in OPERATOR'S GUIDE Action on return codes

in UTILITIES Action operand

in BASIC TELECOMM. ACCESS METHOD Activating communication lines

in QTAM MESSAGE CONTROL PROGRAM Activating terminal list entries

in BASIC TELECOMM. ACCESS METHOD bctive attention

24 C24-5029 25 C28-6603 25 C28-6639 25 C28-6602 36 C28-6539

24 C24-5029

25 C28-6603 25 C28-6639 25 C28-6602

32 C28-6586

30 C30-2004

36 C28-6646 25 C28-6596

30 C30-2004 30 C30-2004

30 C30-2004 31 C28-6538 20 C28-6540 32 C28-6586 30 C30-2004 30 C30-2005 30 C30- 2004 in GRAPHIC PROG. SERVICES (FORTRAN) 25 C27-6932

level Active RB queue

in PROGRAMMER'S GUIDE TO DEBUGGING 20 C28-6670 description of

instructions for using in a stand-alone dump (MFT) in a stand-alone dump (MVT) in a stand-alone dump (PCP) in an ABEND/SNAP dump (MVT) in an ABEND/SNAP dump (PCP,MFT) in an indicative dump

Active routine

in GRAPHIC PROG. SERVICES (2250) Active state

30 C27-6909 in CONCEPTS AND FACILITIES 20 C28-6535 in PLANNING MFT II REMOTE JOB ENTRY 36 C30-2008 in REMOTE JOB ENTRY 36 c30-2006 Active volumes, where to mount

in OPERATOR'S GUIDE MFT

MVT

ACTR instruction

----in ASSEMBLER LANGUAGE

20 C28-6540

21 c28-6514

4 _____________________________________________ . format of

inside macro definitions outside macro definitions use of

Actual address

in CONCEPTS AND FACILITIES Actual arguments

in FORTRAN IV LANGUAGE Actual decimal point (PICTURE)

in COBOL LANGUAGE Actual key

in COBOL LANGUAGE ACTUAL KEY clause

in COEOL (F) PROGRAMMER'S GUIDE in COBOL LANGUAGE

Actual parameter in ALGOL LANGUAGE

20 25 2KJ 2lJ 24

2l~

26

Addition

C28-6535 C28-6515 C28-6516 C28-6516 C28-6380 C28-6516 C28-6615 Adaptability of the operating system

in INTRODUCTION 20 C28-6534

Adapter, channel-to-channel in PRINCIPLES OF OPERATION ADAPTER operand

in BASIC TELECOMM. ACCESS METHOD ADD

01 A22-6821 30 C30-2004

in COEOL LANGUAGE 24 C28-6516

in PL/I SUBROUTINE LIBRARY 29 C28-6590 complex arguments

real arguments

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337

in UTILITIES 32 C28-6586

Add, operation

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337 ADD DECIMAL instruction CAP)

in PRINCIPLES OF OPERATION 01 A22-6821 description

example of use

ADD HALFWORD instruction (AB)

example of use ADD instruction CAR, A)

in PRINCIPLES OF OPERATION 01 A22-6821 ADD LOGICAL instruction CALR, AL)

in PRINCIPLES OF OPERATION 01 A22-6821 ADD NORMALIZED instruction (ADR,AD,AER,AE)

example of use

ADD NORMALIZED instruction (AXR)

in PRINCIPLES OF OPERATION 01 A22-6821 Add to iteration counter

in GRAPHIC PROG. SERVICES (2280-82) 30 C27-6927 ADD UNNORMALIZED instruction

example of use Adding DD Statements

in COBOL (E) PROGRAMMER'S GUIDE 24 C24-5029 Adding new member to a symbolic library

in UTILITIES 32 C28-6586

Adding records to a data set

in PL/I PROGRAMMER'S GUIDE 29 C28-6594 INDEXED data set

REGIONAL data set Addition

in COBOL LANGUAGE 24 C28-6516

Arithmetic operator Addition (change type)

in MAINTENANCE PROGRAM 360S-UT-506 31 C27-6918 Addition and Subtraction

(11)

Addition (continued)

in REPORT PROGRAM GENERATOR LANG.

Additional

in LINKAGE EDITOR Additional entry points

28 C24-3337 31 C28-6538 in SUPERVISOR 6 DATA MGT. MACROS 36 C28-6647 in SUPERVISOR 6 DATA MGT. SERVICES 36 C28-6646 Additional information to define a data

in USER'S GUIDE: JOB CTRL 2250 36 C27-6933 Additional information to define a data set

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 Additional input

in COBOL (F) PROGRAMMER'S GUIDE Additional input to the linkage editor

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Additional transient areas option

in STORAGE ESTIMATES ADDR (PMAP)

---rn COBOL (E) PROGRAMMER'S GUIDE Address

in LINKAGE EDITOR

assembled, of a control section relative

as main entry point in END statement in module map

symbolic, specification of in PRINCIPLES OF OPERATION

generation

of channel address word (CAW) of channel status word (CSW) of diagnostic scan-out area of initial program loading CCWl of initial program loading CCW2

24 c28-6380 25 C28-6603 25 C28-6639 25 C28-6602 20 c28-6551 24 C24-5029

31 C28-6538

01 A22-6821

of old and new program status words of timer

switches

in TESTRAN 37 C28-6648

as an external reference assembled as a constant declared in a USING statement explicit

indexed test point

Address, direct-access

in SUPERVISOR 6 DATA MGT. SERVICES 36 c28-6646 absolute (actual)

relative Address, unit

in JOB CONTROL LANGUAGE 36 C28-6539 Address-compare switch on system control

in PRINCIPLES OF OPERATION 01 A22-6821 Address constants

in ASSEMBLER LANGUAGE A-type

complex relocatable expressions literlas not allowed

Q-type s-type V-type y-type

in LINKAGE EDITOR Address list

in SORT/MERGE ADDRESS operand

in BASIC TELECOMM. ACCESS METHOD Address specification

Address subparameter in the SPACE in JOB CONTROL LANGUAGE

Addressing

in ASSEMBLER LANGUAGE dummy sections

21 C28-6514

31 C28-6538 33 C28-6543 30 C30-2004 21 C28-6514 36 C28-6539 21 C28-6514

5

explicit

external control sections implied

relative

AGO

in BASIC TELECOMM. ACCESS METHOD 30 C3O-2004 definition of

lists

in MODEL 65 MULTIPROCESSING 20 C28-6671 secondary storage devi.ces

unit record devices

in PRINCIPLES OF OPERATION 01 A22-6821 channels

control units exception I/O devices limitations nonexistent areas

of locations in main and shared storage of registers

of subchannels and shared subchannels wraparound feature with maximum storage in QTAM MESSAGE CONTROL PROGRAM 30 C30-2005

characters terminals Addressing exception

in FORTRAN IV (H) PROG. GUIDE 25 C28-6602 Addressing schemes

in COBOL LANGUAGE 24 C28-6516

Relative record Relative track Addressing the CRT

in GRAPHIC PROG. SERVICES (2250) 30 C27-6909 Addressing the 2280/82 CRT

in GRAPHIC PROG. SERVICES (2280-82) 30 C27-6927 ADJUST compiler option

---rn-FORTRAN IV (E) PROG. GUIDE Adjustable dimensions

in FORTRAN IV LANGUAGE ADVANCE key

25 C28-6603 25 C28-6515

in USER'S GUIDE: JOE CTRL 2250 36 C27-6933 in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 Advanced overlay supervisor with check

in STORAGE ESTIMATES 20 c28-6551 Advantages of the M65 multiprocessing

in MODEL 65 MULTIPROCESSING 20 C28-6671 AFF

in ALGOL PROGRAMMER'S GUIDE in COBOL (F) PROGRAMMER'S GUIDE

parameter subparameter

AFF parameter in the DD statement in JOB CONTROL LANGUAGE

AFF subparameter

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE AFF subparameter in the UNIT parameter

in JOB CONTROL LANGUAGE Affinity

in JOB CONTROL LANGUAGE channel

unit

Affinity for devices

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE AGO instruction

---in ASSEMBLER LANGUAGE

26 C33-4000 24 C28-6380

36 C28-6539 25 C28-6603 25 C28-6639 25 C28-6602 36 C28-6539

36 C28-6539

25 C28-6603 25 C28-6639 25 C28-6602 21 C28-6514

(12)

__ ~6~ ___________________________________________ Allocation example of

format of

inside macro definitions operand field of

outside macro definitions sequence symbol in

use of AIF instruction

---in ASSEMBLER LANGUAGE example of

AINT in Alarm

format of

inside macro definitions invalid operand fields of logical expression in operand field of

outside macro definitions sequence symbols in use of

valid operand fields of

FORTRAN IV LIBRARY SUBPROGRAMS

in GRAPHIC PROG. SERVICES (FORTRAN) ALERT

in PLANNING MFT II REMOTE JOB ENTRY in REMOTE JOB ENTRY

ALGAMA

---rn-FORTRAN IV LIBRARY SUBPROGRAMS ALGLDD02-15

in ALGOL PROGRAMMER'S GUIDE ALGLIB macro instruction ---rn-SYS,]?EM GENERATION ALGOFC

---rn-ALGOL PROGRAMMER'S GUIDE ALGOFCL

in ALGOL PROGRAMMER'S GUIDE ALGOFCLG

in ALGOL PROGRAMMER'S GUIDE ALGOL

in CONCEPTS AND FACILITIES in STORAGE ESTIMATES

for

21 C28-6514

25 C28-6596 25 C27-6932

36 C30-2008 36 C30-2006 25 C28-6596

26 c33-4000 31 C28-6554

26 C33-4000 26 C33-4000

26 C33-4000

20 C28-6535 20 C28-6551 a uxiliary storage requirements

auxiliary storage requirements minimum dynamic main storage region size

for work in TAPE LABELS

ALGOL compiler

in ALGOL PROGRAMMER'S GUIDE description

listings in INTRODUCTION ALGOL library

in ALGOL PROGRAMMER'S GUIDE

~ in SYSTEM GENERATION ALGOL macro instruction

in SYSTEM GENERATION ALGOL messages

in MESS,A.GES AND CODES ALGOL object program messages

in MESSAGES AND CODES ALGOL processor

in SYSTEM GENERATION generation of sample program

30 C28-6680 26 C33-4000 20 C28-6534 26 C33-4000 31 c28-6554 31 C28-6554 20 C28-6631 20 C28-6631 31 C28-6554

Algorithms

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 ALIAS

Alias

in SYSTEM PROGRAMMER'S GUIDE 20 C28-6550 assigning

deleting entry

specifying a name using ALIAS card

in MAINTENANCE PROGRA.M 360S-UT-506 ALIAS linkage editor control statement

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Alias names

in LINKAGE EDITOR

in SUPERVISOR & DATA MGT. MACROS in ATTACH

in BLDL in LINK in LOAD in XCTL

in SUPERVISOR & DATA MGT. SERVICES ALIAS statement

in LINKAGE EDITOR Aliases

in CONCEPTS AND FACILITIES Alignment, boundary

in ASSEMBLER LANGUAGE CNOP instruction for machine instruction Alignment, buffer

in SUPERVISOR & DATA MGT. SERVICES Alignment and Slack Bytes

in COBOL (E) PROGRAMMER'S GUIDE

~ in PL/I SUBROUTINE LIBRARY ALL (Figurative constant)

in COBOL LANGUAGE Allocate I/O devices

in CONCEPTS AND FACILITIES

ALLOCATE module, changing or replacing in UTILITIES

Allocating main storage

31 C27-6918 25 C28-6603 25 C28-6639 25 C28-6602 31. C28-6538 36 C28-6647

36 C28-6646 31 C28-6538 20 C28-6535 21 C28-6514

36 C28-6646 24 C24-5029 29 C28-6590 24 C28-6516

20 C28- 6535 32 C28-6586 in CONCEPTS AND FACILITIES 20 C28-6535

explicit requests implicit requests

Allocating main storage for buffers

in CONCEPTS AND FACILITIES 20 C28-6535 Allocating space for a data

in USER'S GUIDE: JOB CTRL 2250 36 C27-6933 Allocating space for a data set

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 Allocating Space for Indexed Sequential

in COBOL (E) PROGRAMMER'S GUIDE 24 C24-5029 Allocating space with the IEHMOVE program

Allocation

in SUPERVISOR & DATA MGT. SERVICES 36 C28-6646 Allocation, default

Allocation, device

in OPERATOR'S GUIDE 20 C28-6540 MFT

MVT PCP

in PLANNING FOR MFT II 36 C27-6939 Allocation, of main storage

(13)

~Al==l~o~c~a~t~i~o~n~(~c~o~n~t~in~u~e~d~) ______________________________ ~7~_______________________________________________ AMOn in SUPERVISOR & DATA MGT. MACROS

dynamically through GETMAIN Allocation characteristic

in SYSTEM PROGRAMMER'S GUIDE Allocation messages

in COBOL (F) PROGRAMMER'S GUIDE Allocation of Utility Work Space

in COBOL (E) PROGRAMMER'S GUIDE Allocations of AUTOMATIC storage

in PL/I PROGRAMMER'S GUIDE ALOG

in FORTRAN IV LIBRARY SUBPROGRAMS ALOG10

in FORTRAN IV LIBRARY SUBPROGRAMS Alpha-form (PICTURE)

in COBOL LANGUAGE Alphabet

in ALGOL LANGUAGE ALPHABETIC

in COBOL LANGUAGE Class test

Alphabetic characters in RPG

Alphabetic item in COBOL LANGUAGE

Format PICTURE

Alphameric character display routine in GRAPHIC PROG. SERVICES (2250) Alphameric character set

in JOB CONTROL LANGUAGE Alphameric data

36 C28-6647

20 C28-6550 24 C28-6380 24 C24-5029 29 C28-6594 25 C28-6596 25 C28-6596

24 C28-6516 26 C28-6615 24 C28-6516 28 C24-3337 24 C28-6516

30 C27-6909 36 C28-6539 in FORTRAN IV: DATA TMN. S360-1130 36 C27-6937

in a System/360 half-word integer array in a System/360 standard-length real in an 1130 integer array

in an 1130 standard-precision real array Alphameric field length

Alphameric information

in USER'S GUIDE: JOB CTRL 2250 definition of

entering at display unit .

28 C24-3337 36 C27-6933 in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938

definition of

entering at display unit Alphameric keyboard

in GRAPHIC PROG. SERVICES (FORTRAN) 25 C27-6932 CANCEL key

END key

entering information from JUMP key

in GRAPHIC PROG. SERVICES (2250) in GRAPHIC PROG. SERVICES (2260) in USER'S GUIDE: JOB CTRL 2250

definition of

entering information through keys on

photograph of

30 C27-6909 30 C27-6912 36 C27-6933

in USER'S GUIDE: JOB CTRL 2250-1130 36 C27-6938 definition of

entering information through keys on

p~rforming END and CANCEL functions from positioning the cursor with

selecting operations with selecting options with Alpham,eric literals, forming

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337 Alphameric literals, output

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337 Alphameric tape labeling

in UTILITIES Alphanumeric item

in COBOL LANGUAGE Format

PICTURE ALTER

---rn

COBOL LANGUAGE (See GO TO)

Alterations of channel command words in SYSTEM PROGRAMMER'S GUIDE Altering an option

32 C28-6586 24 C28-6516

0

24 C28- 6516

20 C28-6550 in OPERATOR'S GUIDE 20 C28-6540 Altering main storage

in OPERATOR'S GUIDE 20 C28-6540 Model 30

Model 40 Model 50 Model 65 Model 75

Altering of an instruction by EXECUTE

in PRINCIPLES OF OPERATION 01 A22-6821 Alternate collating sequence

in REPORT PROGRAM GENERATOR LANG. 28 C24-3337 Alternate console option

in STORAGE ESTIMATES 20 C28-6551 Alternate console shift

in OPERATOR'S GUIDE 20 C28-6540 Alternate DD names, specifying

Alternate destination

in QTAM MESSAGE CONTROL PROGRAM 30 C3Q-2005 Alternate-patch I/O control

in MODEL 65 MULTIPROCESSING 20 C28-6671 Alternate-prefix light on system control

in PRINCIPLES OF OPERATION 01 A22-6821 Alternate tracks, assigning

Alternating arguments and functions in REPORT PROGRAM GENERATOR LANG.

Alternative channel addressing in SYSTEM GENERATION

Alternative characters, printing in UTILITIES

Alternatives, notation for showing in UTILITIES

Alternatives to basic move and coPy in UTILITIES

ALX subparameter

28 C24- 3337

31 C28-6554 32 C28-6586 32 C28-6586 32 C28-6586 in COBOL (F) PROGRAMMER'S GUIDE 24 C28-6380 in FORTRAN IV (E) PROG. GUIDE 25 C28-6603 in FOR~RAN IV (G) PROG. GUIDE 25 C28-6639 in FORTRAN IV (H) PROG. GUIDE 25 C28-6602 ALX subparameter in the SPACE parameter

in JOB CONTROL LANGUAGE 36 C28-6539 AMAXll

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 AMAXO

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 AMINO (xxxFMAXn

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 AMINl

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 AMOD

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596

(14)

Ampersand Ampersand

in TESTRAN Ampersand, &

Ampersand, edit word

Ampersands in

in ASSEMBLER LANGUAGE character expressions macro instruction operands MNOTE instruction

symbolic parameters variable symbols AMWP bits

----rn PROGRAMMER'S GUIDE TO DEBUGGING in an indicative dump

meaning of An-form (PICTURE) - in COBOL LANGUAGE Analysis check

____ 8~ _______________________________ _ Analyzing malfunctions

37 C28-6648 in MODEL 65 MULTIPROCESSING 28 C24-3337 AND (LOGICAL OPERATOR)

- - i n COBOL LANGUAGE

28 C24-3337 AND instruction (NR,N,NI,NC) in PRINCIPLES OF OPERATION 21 C28-6514 description

example of use AND relationship

ANOP instruction

- - i n ASSEMBLER LANGUAGE example of

20 C28-6670 format of

sequence symbol in use of

ANSRING operand

24 C28-6516 in BASIC TELECOMM. ACCESS METHOD Answering

Appendix 20 C28-6671

24 C28-6516 01 A22-6821

28 C24-3337

21 C28-6514

30 C30-2004 in MAINTENANCE PROGRP~ 360S-UT-506 31 C27-6918

Analysis log

in BASIC TELECOMM. ACCESS METHOD 30 C30-2004 in MAINTENANCE PROGRAM 360S-UT-506 31 C27-6918

change SSI

deletion-item log entries disposition

ETF

header lines library SSI log messages member name

member-status lines operation

special action special flag Analysis logic

in MAINTENANCE PROGRAM 360S-UT-506 Analysis offline

in UTILITIES

Analysis processing and control in MAINTENANCE PROGRAM 360S-UT-506 Analysis routine

in QTAM MESSAGE PROCESSING SERVICES ANALY.E. -.- graphic attention analysis

in GRAPHIC PROG. SERVICES (2250) ANALYZ macro instruction

in GRAPHIC PROG. SERVICES (2260) ANALYZ pointer table

in GRAPHIC PROG. SERVICES (2260) ANALYZE

in UTILITIES Analyzer

31 C27-6918 32 C28-6586 31 C27-6918 30 C30-2003 30 C27-6909 30 C27-6912 30 C27-6912 32 C28-6586

in MAINTENANCE PROGRAM 360S-UT-506 31 C27-6918 DD cards for

EXEC card for input sources job stream for machine requirements output

processing options provisions

purposes

Analyzer control cards

in MA:INTENANCE PROGRAM 360S-UT-506 31 C27-6918 format

Analyzer job stream

in MAINTENANCE PROGRAM 360S-UT-506 31 C27-6918 Analyzer messages

in MAINTENANCE PROGRAM 360S-UT-506 31 C27-6918

defined lists

in QTAM MESSAGE CONTROL PROGRAM 30 C30-2005 Anticipatory buffering

in SUPERVISOR & DATA MGT. SERVICES 36 C28-6646 ANY

in PL/I SUBROUTINE LIBRARY AORP -- address of overflow routine ----rn GRAPHIC PROG. SERVICES (2250) Apostrophe

in COBOL (E) PROGRAMMER'S GUIDE in TESTRAN

Apostrophe symbol

Apostrophes

in JOB CONTROL LANGUAGE inclusion in variables use of as delimiters

Appendage exits for rollout/rollin in SYSTEM PROGRAMMER'S GUIDE Appendage identification

in SYSTEM PROGRAMMER'S GUIDE Appendage table block segment

in SYSTEM CONTROL BLOCKS data extent block Appendages

in SYSTEM PROGRAMMEH'S GUIDE characteristics of

entering into SVC library Appendages, rollout/rollin

in SYSTEM PROGRAMMER'S GUIDE Appendages to EXCP routines

in SYSTEM PROGRAMMEU'S GUIDE Appendix

in ON-LINE TEST EXECUTIVE PROGRAM Appendix A.

in COBOL (E) PROGRAMMER'S GUIDE Appendix B.

in COBOL (E) PROGRAMMER'S GUIDE Appendix C.

in COBOL (E) PROGRAMMER'S GUIDE Appendix D.

in COBOL (E) PROGRM1MER' S GUIDE Appendix E.

in COBOL (E) PROGRAMMER'S GUIDE Appendix F.

29 C28-6590

30 C27-6909 24 C24-5029 37 C28-6648 28 C24-3337 36 C28-6539

20 C28-6550 20 C28-6550 36 C28-6628

20 C28-6550

20 C28-6550 20 C28-6550 37 C28-6650 24 C24-5029 24 C24-5029 24 C24-5029 24 C24-5029 24 C24-5029

(15)

Applications

in COBOL (E) PROGRAMMER'S GUIDE Applications

in QTAM MESSAGE CONTROL PROGRAM APPLY

in COBOL LANGUAGE APPLY WRITE ONLY

24 C24-5029 30 C30-2005 24 C28-6516 24 C24-5029 APSW field, in an ABEND/SNAP dump (MVT)

---rn PROGRAMMER'S GUIDE TO DEBUGGING 20 C28-6670 Arc generation

in GRAPHIC PROG. SERVICES (2250) Arccosine subprograms

in FORTRAN IV LIBRARY SUBPROGRAMS ARCOS

in FORTRAN IV LIBRARY SUBPROGRAMS Arcsin subprograms

in FORTRAN IV LIBRARY SUBPROGRAMS ARCTAN

---rn-ALGOL LANGUAGE Arctangent subprograms

in FORTRAN IV LIBRARY SUBPROGRAMS Area

in TESTRAN

Area arrangement for ISAM data sets in JOB CONTROL LANGUAGE

AREA condition

in PL/I PROGRAMMER'S GUIDE Area length

in PL/I PROGRAMMER'S GUIDE AREA ON-unit

in PL/I PROGRAMMER'S GUIDE Area operand

in BASIC TELECOMM. ACCESS METHOD Area size

in PL/I PROGRAMMER'S GUIDE Area variable

in PL/I PROGRAMMER'S GUIDE

allocation and release of storage Areas of ISAM data sets

in JOB CONTROL LANGUAGE Argument

Argument (USING) in COBOL LANGUAGE Argument List

in COBOL (E) PROGRAMMER'S GUIDE Argument list

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Arguments

in BASIC FORTRAN IV LANGUAGE actual

dummy in COMMON

in COBOL (F) PROGRAMMER'S GUIDE in FORTRAN IV LIBRARY SUBPROGRAMS Arguments, in function or subroutine

Arguments in a function reference in PL/I PROGRAMMER'S GUIDE Arguments used by many GSP

in GRAPHIC PROG. SERVICES (FORTRAN) subroutines

30 C27-6909 25 C28-6596 25 C28-6596

25 C28-6596 26 C28-6615 25 C28-6596

37 C28-6648 36 C28-6539 29 C28-6594 29 C28-6594 29 C28-6594 30 C30-2004 29 C28- 6594 29 C28- 6594

36 C28-6539

28 C24-3337 24 C28-6516 24 C24-5029 25 C28- 6603 25 C28-6639 25 C28-6602 25 C28-6629

24 C28-6380 25 C28-6596 25 C28-6515 29 C28-6594 25 C27-6932

9

Arithmetic

in PRINCIPLES OF OPERATION decimal

fixed-point floating-point

Arithmetic and logical unit in PRINCIPLES OF OPERATION Arithmetic assignment statement

in BASIC FORTRAN IV LANGUAGE Arithmetic assignment statements

in FORTRAN IV LANGUAGE Arithmetic data types

in PL/I PROGRAMMER'S GUIDE Arithmetic expression

in ALGOL LANGUAGE in COBOL LANGUAGE

COMPUTE

Arithmetic expressions in ASSEMBLER LANGUAGE

arithmetic relations evaluation procedure invalid examples of operands sublists operators allowed parenthesized terms in

evaluation of examples of SETA instruction SETB instruction substring notation terms allowed valid examples of

in BASIC FORTRAN IV LANGUAGE definition of

order of evaluation use of

in FORTRAN IV LANGUAGE defined

order of computation Arithmetic IF

in FORTRAN IV LANGUAGE Arithmetic IF statement

in BASIC FORTRAN IV LANGUAGE Arithmetic Operations

Arithmetic operations

in PL/I PROGRAMMER'S GUIDE Arithmetic operator

in ALGOL LANGUAGE Arithmetic operators

in BASIC FORTRAN IV LANGUAGE in COBOL LANGUAGE

Arithmeti~ relations in ASSEMBLER LANGUAGE Arithmetic statements

in COEOL LANGUAGE Arithmetic Suggestions

01 A22-6821

01 A22-6821 25 C28-6629 25 C28-6515 29 C28-6594 26 C28-6615 24 C28-6516

21 C28-6514

25 C28-6629

25 C28-6515

25 C28-6515 25 C28-6629 28 C24-3337 29 C28- 6594 26 C28- 6615 25 C28-6629 24 C28-6516 25 C28-6515 21 C28-6514 24 C28-6516 in COBOL (E) PROGRAMMER'S GUIDE 24 C24-5029 Arithmetic to character-string conversion

in PL/I REFERENCE MANUAL 29 C28-8201 examples of

length of result

Arithmetic value of numeric character data

in PL/I REFERENCE MANUAL 29 C28-8201 Arithmetic variable

in ASSEMBLER LANGUAGE Arithmetics

Ar~

in ALGOL LANGUAGE

in PL/I REFERENCE MANUAL cross sections of dimensions of of structures

21 C28-6514 24 C24-5029 26 C28-6615 29 C28-8201

(16)

Array_ (contin=u=e=d~)_. _ _ _ _ Array ar9uments

in PL/I REFERENCE MANUAL Array arithmetic

in PL/I PROGRAMMER'S GUIDE Array assignment

in PL/I PROGRAMMER'S GUIDE in PL/I REFERENCE MANUAL Arrc;y bounds

1n PL/I REFERENCE MANUAL asterisks for

expressions for based variables Array declaration

in ALGOL LANGUAGE Array expressions

in PL/I REFERENCE MANUAL in array assignment data conversion in operands of

with element operands with infix operators with prefix operators Array format

in PL/I PROGRAMMER'S GUIDE Array handling

in ALGOL PROGRAMMER'S GUIDE Array indexers

in PL/I SUBROUTINE LIBRARY

intE~rleaved arrays simple arrays Array initialization

in PL/I PROGRAMMER'S GUIDE

Array manipulation built-in functions in PL/I REFERENCE MANUAL

values returned by Array multiplication

in PL/I PROGRAMMER'S GUIDE Array operations, results of

in PL/I REFERENCE MANUAL Array or structure name

in PL/I PROGRAMMER'S GUIDE Array parameters

in PL/I REFERENCE MANUAL Array transmission

in PL/I PROGRAMMER'S GUIDE in row major order Array variables

in PL/I REFERENCE MANUAL Arrays

in BASIC FORTRAN IV LANGUAGE arrangement in storage array names

declaring the size of

tyP(~

subscripts

in FORTRAN IV LANGUAGE arrangement of

dimension information general

tYPE! specification

29 C28-8201 29 C28-6594 29 C28-6594 29 C28-8201 29 C28-8201

26 C28-6615 29 C28-82.01

29 C28-6594 26 C33-4000 29 C28-6590

29 C28-6594 29 C28-8201 29 C28-6594 29 C28-8201 29 C28-6594 29 C28-8201 29 C28-6594 29 C28-8201 25 c28-6629

25 C28-6515

in FORTRAN IV: DATA TMN. S360-1130 36 C27-6937 arrangement in storage

coinciding in System/360 in 1130 dimE!Dsioning of

examples of

table summarizing requirements for System/360 temporary array for input System/360 temporary array for output system/360 user array for input System/360 user array for output 1130 user array for input

1130 user array for output Arrow (pointer-qualifier)

10 Assembler

in PL/I REFERENCE M1\NUAL 29 C28-8201 ARSIN

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 ASA carriage control character

in PL/I PROGRAMMER'S GUIDE 29 C28-6594 ASA control characters in output data sets

in SYS!EM PROGRAMMER'S GUIDE 20 C28-6550 ASCENDING

in COBOL LANGUAGE

ASC~I (A) bit (in PSW)

1n PRINCIPLES OF OPERATION ASCII-8

in PRINCIPLES OF OPERATION ASGNBFR

24 C28-6516 01 A22-6821 01 A22-6821 in GRAPHIC PROG. SERVICES (2280-82) 30 C27-6927 ASGNBFR macro instruction

in GRAPHIC PROG. SERVICES (2250) 30 C27-6909 ASM (job step)

in TESTRAN ASMBLR steps

in SYSTEM GENERATION restart

37 C28-6648

31 C28-6554

ASMEC and ASMFC (cataloged procedures)

---rn

^TESTRAN 37 C28-6648

definition use

ASMFC, cataloged procedure for assembly

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 ASMFCL, cataloged procedure for assembly

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 ASMFCLG, cataloged procedure for assembly,

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 ASMTRTAB macro

in BASIC TELECOMM. ACCESS METHOD 30 C3D-2004 Assembler

in LINKAGE EDITOR 31 C28-6538

in SYS!EM GENERATION 31 C28-6554 generation of

sample program

in TAPE LABELS 30 C28-6680

E- or F-level assembler program listing

options

processing of TESTRAN symbol tables

use with TESTRAN

Assembler cataloged procedures

in ASSEMBLER (E) PROGRAMMER'S GUIDE 21 C28-6595 for assembling

for assembling and linkage editing for assembling, linkage editing and input stream statements

overriding

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 Assembler data sets

in ASSEMBLER (E) PROGRAMMER'S GUIDE 21 C28-6595 ddname SYSIN

ddname SYSLIB ddname SYSPRINT ddname SYSPUNCH ddname SYSUTl

(17)

Assembler (continued) ddname SYSUT2 ddname SYSUT3

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 Assembler E

in STORAGE ESTIMATES 20 C28-6551 auxiliary storage requirement for system auxiliary storage requirement for work minimum dynamic main storage

Assembler E messages

in MESSAGES AND CODES 20 C28-6631 numbered messages

unnumbered messages Assembler F

in STORAGE ESTIMATES 20 C28-6551 auxiliary storage requirement system

auxiliary storage requirement for work minimum dynamic main storage

region size Assembler F messages

in MESSAGES AND CODES 20 C28-6631 Assembler instructions

in ASSEMBLER LANGUAGE 21 C28-6514 statement

table

Assembler language

in ALGOL PROGRAMMER'S GUIDE in ASSEMBLER LANGUAGE

basic programming support comparison chart

macro language, relation to statement format

structure

26 C33-4000 21 C28-6514

in CONCEPTS AND FACILITIES 20 C28-6535 Assembler language (use of GSP in)

in GRAPHIC PROG. SERVICES (FORTRAN) 25 C27-6932 Assembler language calling sequence

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 Assembler-language programs

in COBOL (F) PROGRAMMER'S GUIDE 24 C28-6380 Assembler language subprograms

in FORTRAN IV (E) PROG. GUIDE 25 C28-6603 addresses of arguments

argument list calling sequence COMMON area, use of linkage conventions register use

save area

subroutine references in FORTRAN IV (G) PROG. GUIDE

addresses of arguments argument list

calling sequence COMMON area, use of linkage conventions register use

RETURN save area

subroutine references

25 C28-6639

in FORTRAN IV (H) PROG. GUIDE 25 C28-6602 addresses of arguments

argument list calling sequence COMMON area, use of linkage conventions register use

save area

subroutine references Assembler listing

in ASSEMBLER (E) PROGRAMMER'S GUIDE 21 C28-6595 cross-reference

diagriostics

external symbol dictionary relocation dictionary source and object program statistical messages

11 ASSIGN

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756

cross reference

E

diagnostics ,

external symbol dictionary relocation dictionary source and object program statistical messages Assembler options

in ASSEMBLER (E) PROGRAMMER'S GUIDE 21 C28-6595 default entry

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 default entry

Assembler portion limitations

in ASSEMBLER (F) PROGRAMMER'S GUIDE 21 C26-3756 Asserr.bler program

in ASSEMBLER LANGUAGE 21 C28-6514 basic functions

output

Assembler requirements

in FORTRAN IV LIBRARY SUBPROGRAMS 25 C28-6596 Assembler Subprograms

in COBOL (E) PROGRAMMER'S GUIDE 24 C24-5029 Assemblers

in INTRODUCTION 20 C28-6534

ASSEMBLR macro instruction

in SYSTEM GENERATION 31 C28-6554 Assembly

job control statements for listing

of address operands

of problem program and TEST RAN Assembly, definition of

in USER'S GUIDE: JOB CTRL 2250-1130 Assembly, terminating an

in ASSEMBLER LANGUAGE Asserobly initialization

in GRAPHIC PROG. SERVICES (2280-82) Assembly initialization (GINIT)

in GRAPHIC PROG. SERVICES (2250) Assembly initialization and assembly

in GRAPHIC PROG. SERVICES (2280-82) Asserr.bly intialization macro

in GRAPHIC PROG. SERVICES (2250) Assembly language, symbolic operand

in PRINCIPLES OF OPERATION Assembly language program

in GUIDE TO MODEL 91 SUPPORT Asserobly no operation

in ASSEMBLER LANGUAGE Assembly service macro

in GRAPHIC PROG. SERVICES (2250) Assembly service macro-instructions

in GRAPHIC PROG. SERVICES (2280-82) Assembly-time counters and

in GRAPHIC PROG. SERVICES (2250) ASSIGN

---rn-COBOL LANGUAGE ASSIGN and Assigned GO TO

in FOR 'IRAN IV LANGUAGE Assign buffer (ASGNBFR)

in GRAPHIC PROG. SERVICES (2250) ASSIGN clause

in COBOL (F) PROGRAMMER'S GUIDE Assigning an alias

in SYS'rEM PROGRAMMER'S GUIDE Assigning job priority

in FORTRAN IV (H) PROG. GUIDE Assigning names to temporary data

in FORTRAN IV (G) PROG. GUIDE Assigning Names To Temporary Data Sets

in COBOL (E) PROGRAMMER'S GUIDE Assigning names to temporary data sets

36 C27-6938 21 C28-6514 30 C27-6927 30 C27-6909 30 C27-6927 30 C27-6909 01 A22-6821 32 C28-6666 21 C28-6514 30 C27-6909 30 C27-6927 30 C27-6909 24 C28-6516 25 C28-6515 30 C27-6909 24 C28- 6380 20 C28-6550 25 C28-6602 25 C28- 6639 24 C24-5029

(18)

ASSIGN (continued)

in FORTRAN IV (E) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Assigning sequence numbers

in UTILITIES

Assigning serial numbers (IEHDASDR) in UTILITIES

Assignment

in PL/I REFERENCE MANUAL area

array bi t-· str ing

by assignment statement by input-output

BY NAME

by STRING option character-string

CHECK condition raised for conversion by

element

labE~l mult~iple

pointer structure Assignment component

in SORT/MERGE

exit~s for Assignment functions

in TESTRAN

Assignment of arrays

in PL/I PROGRAl"..MER' S GUIDE Assignment of variables

in PL/I PROGRAMMER'S GUIDE Assignment operations

in PL/I SUBROUTINE LIBRARY bit string

character string Assignment statement

in ALGOL LANGUAGE

in GRAPHIC PROG. SERVICES in PLI'I REFERENCE MANUAL

eval.uation of

(FORTRAN)

for computation and assignment for conversion and editing for internal data movement preprocessor

t~ypes of

Assignment statements in FORTRAN IV LANGUAGE

Assignments made to a VARYING string in PL/I PROGRAMMER'S GUIDE

Assistance to managers in IN'TRODUCTION Assistance to operators

in INTRODUCTION

Assistance to programmers in INTRODUCTION

Associated Variable in FORTRAN IV LANGUAGE Associated variable

in BASIC FORTRAN IV LANGUAGE

Associati~ load modules in CONCEPTS AND FACILITIES Assumed decimal point (PICTURE)

in COBOL LANGUAGE Asterisk

in COBOL (E) PROGRAMMER'S GUIDE Asterisk (PICTURE Character)

in COBOL LANGUAGE Asterisk notation

in PL/I REFERENCE MANUAL for bounds specifications

12 ATAND

25 C28-6603 for controlled parameters 25 C28-6602 for length specifications

for simple parameters 32 C28-6586 for subscripts

in ALLOCATE statement 32 C28-6586 in INITIAL attributes

Asterisk parameter (*)

29 C28-8201 in FORTRAN IV (E) PROG. GUIDE

33 C28-6543

37 C28-6648 29 C28-6594 29 c28-6594 29 C28-6590

26 C28-6615 25 C27-6932 29 C28-8201

25 C28-6515 29 C28-6594

20 C28-6534 20 C28-6534 20 C28-6534

25 c28-6515 25 C28-6629

20 C28-6535

24 C28-6516

24 C24-5029 24 C28-6516 29 C28-8201

in FORTRAN IV (G) PROG. GUIDE in FORTRAN IV (H) PROG. GUIDE Asterisk picture characters (*)

in PL/I REFERENCE MANUAL Asterisk protection

in REPORT PROGRA~ GENERATOR LANG.

Asynchronous

in SUPERVISOR & DATA MGT. MACROS Asynchronous error

in GRAPHIC PROG. SERVICES (2250) Asynchronous errors

in GUIDE TO MODEL 91 SUPPORT light pen detect

Asynchronous exit processing, creating in SYSTEM PROGRAMMER'S GUIDE

Asynchronous exit routines in TESTRAN

Asynchronous exits

in SYSTEM PROGRAMMER'S GUIDE ASYNCHRONOUS files

in COBOL LANGUAGE Asynchronous operation

in PL/I REFERENCE MANUAL Asynchronous overlay supervisor

in STORAGE ESTIMATES Asynchronous processing

in COBOL LANGUAGE

Asynchronous processing declarative in COBOL LANGUAGE

sections

Asynchronous processing sample program in COBOL LANGUAGE

142-145

Asynchronous routine, in System/360 in FORTRAN IV: DATA TMN. S360-1130

definition of termination of

Asynchronous routine, in 1130

in FORTRAN IV: DATA TMN. S360-1130 definition of

termination of

At debug packet identification in FORTRAN IV LANGUAGE AT END

in COBOL LANGUAGE READ

RETURN At sign, @

AT&T Model 33/35 TWX Terminals ----in BASIC TELECOMM. ACCESS METHOD AT&T 83B3 Selective Calling stations

in BASIC TELECOMM. ACCESS METHOD ATAN

in FORTRAN IV LIBRARY SUBPROGRAMS in PL/I SUBROUTINE LIBRARY

complex arguments real arguments ATAN built-in function

in PL/I REFERENCE MANUAL ATAND (real arguments)

in PL/I SUBROUTINE LIBRARY ATAND built-in function

25 C28-6603 2'') C28-6639 25 C28-6602 29 C28- 8201 28 C24-3337

36 C28-6647 30 C27-6909 32 C28- 6666 IHB

20 C28- 6550 37 C28-6648 20 C28-6550 21·1 C28-6516 29 C28-8201 20 C28-6551 21".1 C28-6516 24 C28-6516

21~ C28- 6516

36 C27-6937

25 C28-6515 211 C28-6516

28 C24-3337

30 C30-2004 30 C30-2004

25 C28-6596 29 C28-6590

29 C28-8201

29 C28-6590

IBM System/360 Operating System Master Index

Systems Reference Library