• Aucun résultat trouvé

Tribological properties of amorphous carbon films obtained by electrodeposition from DMF using 2HEAL protic ionic liquid as dopant

N/A
N/A
Protected

Academic year: 2021

Partager "Tribological properties of amorphous carbon films obtained by electrodeposition from DMF using 2HEAL protic ionic liquid as dopant"

Copied!
10
0
0

Texte intégral

Loading

Figure

Fig. 1. AFM image of the polished substrate before deposition.
Fig. 4. Average local roughness of the studied systems obtained by AFM measurements. Fig
Fig. 6. Scratch tracks of the films obtained from: (a) DMF; (b) DMF30LI; (c) DMF50LI; (d) DMF100LI.
Fig. 8. Influence of the dopant in the Coefficient Of Friction (COF) for the film compared to the uncoated substrate.
+3

Références

Documents relatifs

Platinum‐based BMNPs containing a p block metal were prepared by Dietrich et al. Pt‐Sn alloys  were synthesized by the co‐reduction of PdCl 2  and SnCl

Finally, results show a relation at interannual time scales between the thermocline structure and the mixed layer depth south of the equator that may have consequences on

Verbal feedback: positioning and acoustics of French “ouais” and “oui”.. Proceedings of the 14th Laboratory Phonology Conference, 2014,

Figure 6: TNBS induced colitis leads to small bowel inflammation in Nod2 deficient or mutated mice. 3 days after induction, the colitis was monitored with the

between different wavelengths, since their optical absorption band is wide and difficult to manipulate. Organic active materials and devices have shown great potential in the

Considering a NUMA configuration, we first choose to load (resp. store) and keep the entire input (resp. output) image on node 0, and use an internal storage for all intermediate

Thus, by sensing different cell lines, including non-cancerous (HUVEC and Ref52) and cancerous (HeLa), measurable changes in their extracellular metabolites profiles was

In reference to the subscaled helicopter's rotor blade Fortin and Perron, 2009, Figure 3.13 illustrates the required duration for ice accretion on wind turbines to match the same or