)
File No. S360-20
Order No. GC28-6631-12
OS
Systems Reference Library
IBM System/360 Operating System:
Messages and Codes
OS Release 21
This publication lists, explains, and suggests appropriate responses to the system completion codes, wait state codes, and messages produced by IBM-supplied components of the IBM System/360 Operating system. The codes and messages are presented in alphameric order.
I
Twelfth Edition (March, 1972)I
This is a major revision of, and obsoletes, GC28-6631-11 and Technical Newsletter GN28-2501. Major changes to the text are listed in the "Summary of Amendments." All changes to the text are indicated by a vertical line to the left of thec~n~.
I
This edition applies to release 21, of IBM System/360 Operating System, and to all subsequent releases untilotherwise indicated in new editions or Technical Newsletters.
C~nges are continually made to the information herein;
before using this publication in connection with the
operation of IBM systems, consult the latest IBM System/360 and System/370 SRL Newsletter, Order No. GN20-0360, for the editions that are applicable and current.
Requests for copies of IBM publications should be made to your IBM representative or to the IBM branch office serving your locality.
A form for readers' comments is provided at the back of
this publication. If the form has been removed, comments may be addressed to IBM Corporation, Programming systems
Publications, Department D58, PO Box 390, Poughkeepsie, N. Y.
12602. Comments become the property of IBM.
© International Business "Machines Corporation 1966;1967,1968,1969,197Q,1971,1972
(
(
)
!
This publication lists the system completion codes, wait state codes, and messages produced by' IBM-supplied
components of the operating system. The causes of the codes and messages are explained, the accompanying actions by the operating system are described, and
appropriate responses are suggested. The codes and messages are presented in alphameric order.
ASSOCIATED PUBLICATIONS
This publication contains some messages that appear in other publications and are duplicated in this publication, and some messages that appear in this publication only. Those publications that contain messages or that serve as references to specific messages are listed at the beginning of their appropriate message sections in this publication.
Preface
Those publications that introduce concepts and terminology relevant to all messages are:
IBM Systern/360 Operating system:
Data Management services, GC26-3746 Job Control Language Reference, GC28-6704
Operator's Procedures, GC28-6692 Operator's Reference, GC28-6691 Programmer's Guide to Debugging, GC28-6670
Supervisor and Data Management services, GC28-6646
r
I\
/
\
4 Messages' Codes (Release 21)
/
)
)
Summary of Amendments ••••••••••••••••••••••••••••••••••••••••••••••••• 7 Release 21 ••••••••••••••••••••••••••••••••••••••••••••••••••• 9 Release 20.6 ••••.••••••••••••••••••••••••••••••••••••••••• , •••• 9
Re lease 20. 1 •••••••• '. • • • • • • • • • • • .. • • • • • • • • • • • • • • •• • • • •• • • • • •• 10
Release 20 . . . ~ • •• 11
Introduction. • • • • • • .. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• • • • • •• 13
Part I: System Comp leti on Codes.... • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •.• 1 5 Part II: Wait State Codes .•••••••••••••••••••••••••••••• ' ••••••••••• '.. 63
Uncoded Wait state . . . 73
Loops . . . 75
Part III: Numbered Messages... 77
mc (Independent Utility Messages) •••••• ,. ... •• •• •• • ••••••••• •• • •• 79
Error Messages for IBCDASDI (DASDI) and IBCDMPRS (DUMP/RESTORE) •• , •• , ••••• , •••••••••••••••••••••• 79 Diagnostic Messages for Independent Utilities ••••••••••••.••• 82 Error Messages for IBCRCVRP (RECOVER/REPLACE) ••••••••••••••• 85 lEA (supervisor Messages) ••••••••••••••••• '.' ••••••••••••••••••••• 4O. '89 Input/Output supervisor Messages (1) ••••••••••••••• ' ••••••••• 89 Supervisor Messages., ••••••••••••••••••••.•••••• '... ••••• •••• •• 92
ABEND Messaqes . . . ~ •• ' ••••••••• '.. • • • • • • • • • • • •• • • •.• •• 92
NUCLEUS Initialization-program (NIP) Messages ••••••••••••••• 94 Rollout/Rollin Messages... .••• • •••• • •• •• 105
Input/Output supervisor Messages (2) ••••.••••••••••••••••••• 106 IEB (Data Set Utility Messages) •••••••.••••••.••••••••••••••••••••• 111 IEBEDIT Program Messages ••••••••••• '. • • • • •.• • • • • • • • • • • •• • •• •• 111 IEBCOPY Program Messages ••••••••••••••••••••••••••••••••••• 114 IEBCOMPR Program Messages •••••••••.••.•••••••••.•• ' •••••••••••• 124 IEBGENER Program Messages ••••••••••.••••••••••••••••••••.•••• 130 IEC lED lEE IEF IEH lEI IEK IEM IEP IEBPTPCH Program Messages ... '.. • ... • •• •• 136
IEBUPDAT Program Messages •••••••••••••••••••••••••••••••••• 140 IEBISAM Program Messages •••.•••••••••••••••••••••••• '. •.••.•••• 142 IEBDG Program Messages... • • • • • • • • • ••• • • • • • • • • • • • .• • •• • • • •• 143
IEBUPDTE Program Messages •••••••••••••••••••••••••••••••••• 148 IEBTCRIN Program Messages. • • • • • • • • • • •.•• • • • • •• • • •• ••• •• • •• •• 154 (Data Management Messages) ••••••••••••••••••••••••••••••••••• 159 End-of-volume Messages ••••••••••••••••••••••••••••••••••••• 159 open Messages ••••••• ~ •••••••••••••••••••••••••••••••••••••• 168 Close Messages... •.••••• •.• • •••• •••• • •• •• 182
Catalog Management Messages •••••••••••••••••••••••••••••••• 190 Checkpoint/Restart Messages •••••••••••• '.... •• ••••• •••• • •••• 190
Direct Access Device Space Management (DADSM) Messages.;... 190
Tape Label Creation Messages... 191
BTAM/QTAM Message s ••••••••••••••••••••••••••••••••• '. •• • • • •• 191 (Telecommunications Access Method (TCAM) Messages)... 197
(Master SCheduler Messages)... 219
(Job SCheduler Messages)... •.•••• •.•• •••• 265
(System Utility Messages) •••••••••••••••••••••••••••••••••••• 327 IEHLIST Program Messages ... '. •• 327
IEHPROGM Program Messages •••••••••••• '... • ••••••••• •• •• 329
IEHMOVE Program Messages •••••••••••••••.•• ' . . . 333
IEHINITT Program Messages.. • • ... • • ••••• •• •• • • • • • •••• • •• •• 342
IEHIOSUP Program Messages.. • •••• •••• ••• •• ••••• ••••••••••••• 343
IEHDASDR Program Messages •••• ' •••• '.. • ••• •• • •• • • • •• ••••• • •••• 344
IEHATLAS Program Messages ••••••••••• ' ... '. '. • •• • •• •• 352
(System Generation Messages) ••••••••••••••••••••••••••••••••• 357 (FORTRAN IV H Messages) ... ' •• ' •••.• ' •••.•• '... ••••• 359
(PL/I F Messages) ••••••••••••.••••.•••••••••••••••.••• '. • • •• .. • • •• . 361
<COBOL E Messages) ... '.... •• ••••• ... 363
Contents
IER IES lEU lEW lEX lEY IFA IFB IFC IFD IFF IGF IHB IHC IHD IHE IHG IHI IHJ IHK
IHL IIx IKA IKD IKF IKJ IKM IMx
IPD
(Sort/Merge Messages) •••.•.••••• · . . . 365
(Report Program Generator (RPG) Messages) ••••••••••••••••••• 367 (Assembler F Messages) . . .
o...
369(Loader and Linkage Editor Messages) ... ~ ••• • • • • • •• • •• • • • •• 371
Linkage Editor Program Messages •••••••• ' ... 371
Loader Program Me ssages ... '. • • • • • • •• • • • •• 383
(ALGOL Messag.es)... 389
(FORTRAN IV G Compiler Messages)... 391
(SMF Dump Program Messages)... • • ••.•••.• ... • ••••• ••• • •••• 393
(Environment Recording Messages)... 395
(Services Aids Messages) ••••••••••••••••••••••••••••••••••••• 399 IFCDIPOO Program Messages.. • ••.• • •• •• ... ••••••••• •••• 399
IFCEREPO Program Messages.. ... • •.• •••• •••• ••••• • ••• •••••.•.•••• 400
(Online Test Executive Program Messages)... 405
(Graphic Programming Services Messages) •••••••••••••••• ' •••••• 421 (Machine-Check Handler and Dynamic Device Reconfiguration Messages) • • •• .• • • • • • • • • • • .• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• 423 (SUpervisor and Data Management Assembler Macro Expansion Messages) •• , ••••••••• '. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •• .. • • •• 435
(FORTRAN IV Object Program Messages). o. . .. .. ..• . . . . . . . • . ••.. 457
(COBOL E Object Program Messages)... 459
(PL/I Object Program Messages) • o • • • • • • • ' . . . • • • • • • • • • • • • • • • • • • • • • 461
(Maintenance Program - Analyzer Messages) ••••••••••• , ••••••••• 463 (ALGOL Object Program Messag~s) ••••••••.•••••••••••••••••••••• 469 (Checkpoint/Restart Messages) ••••••••••••••• :... ~_71 (Remote Job Entry Messages and Conversational Remote Job Entry Messages) ~. •.• • • • • .• •.•• • • • • • • • • • • • • • • • •.• • • • • • • • • •• • •• •• 477 Remote Job Entry Messages Sent to the Central Operator ••••• 478 Conversational Remote Job Entry Messages Sent to the Central Opera tor. • • • .. • • • • • .• • • • • • • • • • • • • • • • • .• • • • • • • • • • .• • • • • • • • • • •• 485
(Generalized Trace Facility Messages) •••••••••••••••••••••••• 495 (Emulator Messages) ••••••.•••• ' ••.•••••••••••.••••••••••••••••••• 0 503 (Graphic Job Processor and Satellite Graphic Job Processor Messages) •••••••••••••••••••••••••••••••••••••••••••••••••• (Satellite Graphic Job Processor Messages) ••••••••••••••••••• (American National Standard COBOL Messages) •• ' . . . ' ••• (Time Sharing Option Messages) •••••••••••••.•••• ' •••••••••••••• (PL/I Syntax Checker Messages) ••••••••••••••••••••••••••••••• (service Aids Messages) •••••••••••••••••••••••••• !' • • • • • • • • • • • IMAPTFLE Messages •••••••••••••••••••••••••••••••••••••••••• IMASPZAP Messages ... . IMBMDMAP Messages •.•••••••••••.••.•••.••••••••••••••••••••••••• IMBLIST Messaqes ••••••••••••••••••••••••••••••••••••••••••• IMCJQDMP Messages •••••••••••••••••.••••• ~ •• ' ••••••••••••••••• IMDSADMP Messages .•••.•••••.••••••.•.•••••••.•••••••••••••••••••• IMDPRDMP Me ssages ••• ' . . . . (FORTRAN Syntax Checker Messages) •••••• ' ••.••.•••• o • • • • • • • • • • • • • • 5005 523 525 527 553 565 565 567 571 573 576 579 579 595 Part IV: Unnumbered Messages... •.••••••• •.•••••••••••••••••••• 605
Part V: Routing and Descriptor Codes... . . . 623
Part VI: Problem Determination ••••••••••••••••••••••••••••••••••••• 701 Index ... '. ,. • •••• •• •• • • •.••.•• • ... • • • •••• • • .... • • • • ••• • •••• ••• • ... 703
6 Messages & Codes (Release 21)
(
(
)
)
)
Figure
Figure 1. Routing and Descriptor Codes of supervisor Messages ••••••
2. Routing and Descriptor Codes of Data Set Utility
Messages •••••••••••••••••••••••••••••••••••••••••••••••
Figure 3. Routing and Descriptor Codes of Data Management
Messages •••••••••••••••••••••••••••••••••••••••••••••••
Figure Figure
4. Routing and Descriptor Codes of TCAM Messages ••••••••••••
5. Routing and Descriptor Codes of Master Scheduler Figure
Figure Figure Figure Figure Figure Figure Figure F;i.gure Figure
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Figure 16,.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
Figure 32.
Figure 33.
Figure 34.
Figure 35.
Figure 36.
Figure 37.
Figure 38.
Messages •••••••••••••••••••• ; ••••••••••••••••••••••••••
Routing and Descriptor Codes of Job Scheduler Messages •••
Routing and Descriptor Codes of System Utility Mnssages ••
Routing and Descriptor Codes of FORTRAN IV E Messages ••••
Routing and Descriptor Codes of FORTRAN IV H Messages •• ;.;.
Routing and Descriptor Codes of PL/I Messages ••••••••••••
Routing and Descriptor Codes of COBOL E Messages ... . Routing and Descriptor Codes of COBOL F Messages •••••••••
Routing and Descriptor Codes of Sort/Merge Messages ••• ~ ••
Routing and Descriptor Codes of Assembler F Messages •••••
Routing and Descriptor Codes for Linkage Editor-Loader Messages ••••••••••••••••••••••••• ',' •••• ~ •••••••••••••••
Routing and Descriptor Codes of ALGOL Messages •••••••••••
Routing and Descriptor Codes of FORTRAN IV G Messages ••••
Routing and Descriptor Codes of SMF Dump Messages ••••••••
Routing and Descriptor Codes of Environment Recording' Messages ••••••••••••••••••••••••••••••••••••••••• ~ •••••
Routing and Descriptor Codes of IFCDIPOO and IFCEREPO Messages •••••••••••••••••••••••••••••••••••••••••••••••
Routing and Descriptor Codes of OLTEP Messages •••••••••••
Routing and Descriptor Codes of Graphic Programming services Messages ••••••••••••••••• ' . . . . Routing and Descriptor Codes of Machine-Check Handler,
and Dynamic Device Reconfiguration Messages ••••••••••••
Routing and Descriptor Codes of FORTRAN IV Object Program Messages •••••••••••••••••••••••••••••••••••••••••••••••
Routine and Descriptor Codes of COBOL E Object Program' Messages . . . . Routing and Descriptor Codes of PL/I Object Program
Messages •••• , ••••••••• ' ••••••••••••••••••••••••• ' •••••••• '.
Routing and Descriptor Codes of Maintenance Program Analyzer Messages ••••••••••••••••••••• ' •••••••••••••••••
Routing and Descriptor Codes of ALGOL Object Program Messages •••••••••••••••••••••••••••••••••••••••••••••••
Routing and Descriptor Codes of Checkpoint/Restart
Messages •••••••••••••••••••••••••••••••••••••••••••••••
Routing and Descriptor Codes of Remote Job Entry and Conversational Remote Job Entry Messages •••••••••••••••
Generalized Trace Facility Messages ••••••••••••••••••••• '.
Routing and Descriptor Codes of Graphic Job Processor and Satellite Graphic Job Processor Messages •••••••••••
Routing and Descriptor Codes of Satellite Graphic Job Processor Messages •••••••••••• ' ... ' •••••••••••••••
Routing and Descriptor Codes of American National
Standard COBOL Messages ... ;. ••• ' ... ' •••
Routing and Descriptor Codes of TSO Messages •••••••••••••
Routing and Descriptor Codes of Service Aids Messages.~ ••
Routing and Descriptor Codes of Unnumbered Messages ••••••
Problem Determination ••••••••••••••••••••••• ~ •••••••••••
'630 633 634 638 643 652 658 658 658 659 659 659 660 663 663 663 664 664 665 665 666 669 670 673 673 674 680 681 681 682 687 689 691 691 692 697 700 701
Figures
8 Messages & Codes (Release 21)
(
(
\
'I
)
)
)
3410 Tape Subsystem - 3420/3803 Tape SUbsystem Input/Output Supervisor message lEAOOOI now contains information for these new tape subsystems.
3505/3525 Card Reader/Punch
Two new system completion codes and four new data management (IEC) messages provide support from the 3505/3525 card reader/punch.
Model 65 - MP Shared DASD (lEE)
The Master Scheduler (lEE) messages contain support for Model 65 Multiprocessing shared direct access files.
Open" Close End-of-Volume Repack
system completion codes for the open, close, end-of-volume Data Management routines will
no~ be accompanied by messages that indicate the associated return code, jobname, stepname, ddname-concatenation number, dsname, and volUme serial number.
Password Protect
The Syst~m Utility (IEH) section now includes the IEHPROGM Password Protect function
messages.
nlQ This technical newsletter includes messages of the TSO START/STOP/MODIFY function.
PCP Removal
Summary of Amendments for GC28-6631-12 OS Release 21
The Primary Control Program (formerly known as the Unit Control Program) is not supported for this release.
Problem Determination
Messages and codes throughout the book contain additional problem determination information.
A new section has been added to consolidate common problem determination actions (Part VI). Messages will now indicate problem determination actions under the heading
"Problem Determination" and refer the user to the tables in Part VI.
Service Aids
Three new Service Aid programs have messages for this release: IHLGTF (the Generalized Trace Facility), IMCOSJQD (the OS jobqueue dump service aid), and IMBLIST (the module list service aid). The IMDPRDMP service aid message now include the GTF EDIT messages.
status Display
Master Scheduler (lEE) section now includes messages for Status Display support.
RMS for system 370/135
The Machine Check Handler and Dynamic Device Reconfiguration (IGF) section contains RMS/135 messages.
IMDPRDMP
Summary of Amefldments for GC28-6631-11 as up-dated by GN28-2501 OS Release 20.6
This technical newsletter includes messages of the IMDPRDMP - PRINT SWAP function.
'Summary of Amendments for GC28-6631-10 OS Release 20
r---~---,
I Item Supported by the Change IMessages. Completion Codes, and wait State Codes Added, I
I IChanged or Deleted in This Edition I
~---+---,
SVC Dump IIEA021 - lEA0231
MFT ATTACH ASCII Support Time-of-Day Clock IFCEREPO
OS OLTEP Deletion of Service Class C Components
from Type I Documents
Eliminate Duplication of Compiler Messages in Programmer's Guides and Messages and Codes SRL
I Iscc 62A
I I IEC017I,IEC018D,IECl14E,IEC133I.IEC134D,IEF243E.
IIEF510D,IHJ'0071
I IIEEl121 - IEEl14A.IEEl16A.IEEl17A.IEE3061 I IIFC0101 - IFC01CI
I IEntire IFD section
I IEntire IEJ (FORTRAN IV E) Section IEntire lET (Assembler E) section
Some portions of IHC (FORTRAN IV Object Program) Section
IEK IEM IEP IEQ IER IES lEU lEX lEY IHC IHD IHE IHI IIKF I
(FORTRAN IV H) section.
(PLlI) section.
(COBOL E) Section.
(COBOL F) Section.
(Sort/Merge) section.
(Report Program Generator (RPG» section.
(Assembler F) Section.
(ALGOL) section.
(FORTRAN IV G) section.
(FORTRAN IV Object Program) section.
(COBOL E Object Program) Section.
(PLII Object Program) section.
(ALGOL Object Program) section.
(American National Standard COBOL) section.
I.indicates that the messages have been removed from this I publication. but that the explanatory table at the
I beginning of each section, along with the appropriate index I I tab. has been retained to permit easy insertion of messages I I taken from the Programmer's Guides. The tables showing thel I routing and descriptor codes for these messages have also I
I been retained. I
L ________________________________________ L-__________________________________________________________ -J
10 Messages & Codes (Release 21)
.'
I,
I
\
(
)
)
)
Summary of Amendments for GC28-6631-10 OS Release 20.1
r---~---,
I Item Supported by the Change I Messages, Completion Codes, and Wait State Codes Added, I
I IChanged, or Deleted in This Edition I
~---+---~---f TCAM IEntire lED Section; scc 040 - 046; messages IHB066 - IIHB070B, IHB300 - IHB320, IHB342, IHB345, IHB346
TSO I IEntire IKJ section; messages IEE102I,IEE324I, IEE325I,
IIEE237I, IEE359I, IEF110I, IEF125I, IEF126I, IEF279I, IIEF450I, IEF6191
SMF Dump I IEntire IFA Section
3330/2305 Models A & B I IIBC messages, IEAOOOI
3211 Printer I ISystem completion code B13; wait state codes B01-B1D;
Imessages IEC122D, IEC124I, IEC125I, IEC127D, IEC129D, IIEF311I, IEF3221 - IEF329I, IEF3311
Remote Analysis OLTEP Retain/370 I IIFD1251
lMAPTFLE I IIMA0005 - lMA007
L __________________________________ .L-__________________________________________________________ - l
12 Messages & Codes (Release 21)
~
I \
(
(
)
)
)
This publication lists, explains, and suggests appropriate responses to the system completion codes, wait state codes, and messages produced by most of the IBM-supplied components of the IBM System/360 Operating System.
Note: Numbered messages for certain programs, such as the compilers, assemblers, and other special application programs (if not listed in this publication) are contained in the associated System Reference Library publication. Where desired, the messages may be moved from their associated programmer's guide and placed behind the appropriate section title page provided in this publication.
Part I contains the system completion codes.
These 3-digit hexadecimal codes designate
conditions causing abnormal termination of a task or a job step.
Completion codes are intended to be interpreted after. execution by the operator, programmer, system programmer, or installation manager. Where possible, action required for resolution of the abnormal termination is indicated in the
associated operator or programmer response.
During execution, a completion code may be interpreted and/or handled by the (1) COND
parameter of the EXEC or JOB statement, or by (2) an appropriate user-written routine specified in the STAE macro instruction or the ETXR operand of the ATTACH macro instruction.
Introduction
Part II lists all the system wait state codes.
A wait state code is the last 12 bits of the current program status word (expressed in
hexadecimal), indicating the reason for the wait state. Unless otherwise specified, the wait state is to be interpreted by the operator and handled according to the operator response given for the code.
Part II also contains diagnostics and corrective actions for uncoded wait states and loops.
Part III contains numbered messages produced by IBM-supplied components of the system/360
Operating system. Numbered messages are grouped by component name and listed in numeric order.
Part IV contains the unnumbered messages produced by IBM-supplied components. They are grouped alphabetically according to issuing component name and are listed alphabetically within their respective groups.
Part V contains the routing and descriptor codes for applicable messages. Messages and their routing and descriptor codes are tabularized and grouped by component name; and within each table, they are listed in alphameric order.
Part VI contains problem determination
information. Where applicable, the documentation for messages and codes will identify common problem determination actions by referring to the action lists in Part VI, or by identifying unique actions.
14 Messages & Codes (Release 21)
(
)
PART I: SYSTEM COMPLETION CODES
'\
)
)
16 Messages & Codes (Release 21)
i
\
(
)
)
)
Completion Code summary (Part 1 of 10)
r---T---~---T---,
I IComple-1 I I
I I tion 10peration or I I
I Group I Code IMacro Instruction I Explanation I
~---+----t---+---~
IBISAM/ 1001 ICHECK~ GET, PUT I I/O error; terminate specified or no SYNAD specified I
I BSAM/ I I I I
I QSAM/ I I I I
I BDAM I 1 I I
,~---+---+---+---~
BSAM/ 002 I Record is greater than 32,768 bytes, exceeds maximum track ' QSAM/ I length or stated blocksize; could not be contained in one BDAM/ I extent; too many tracks specified for cylinder overflow;
ISAM 1 or BDW or RDW (SDW) invalid.
003 004
I IEOB I I OPEN
1 I I
3525 associated data set I/O sequence error.
Invalid FORMAT card or invalid device specified with OMR.
Conflicting or invalid DCB parameter.
I Data protection image not present in SYS1.IMAGELIB.
008 ICHECK while creating SYNAD returned to CHECK routine, but save area was I Idirect data set destroyed
~---+---+---+---~
IBDAM 1020 I OPEN I Invalid DCBMACRF field I
I I I I 1
I 1025 I I Address in DCBSQND field outside task I
I I I I I
1 1026 IProcessing with I Invalid DCBXARG field or exclusive control status not I
I I lexclusive control I indicated I
~---+---t_---+---~
BISAM/ 030 1 OPEN Invalid DCBMACRF field
QISAM 1
031 I 032 I I OPEN 033 I I OPEN
I I 034 I I OPEN
I 035 1 I OPEN
I I 036 I OPEN 037 I I OPEN 038 1 I OPEN 039 I I Scanning 03A I I CLOSE 03B I I OPEN
I I
I/O error; no SYNAD specified Invalid DCBMACRF field
I/O error in reading volume index or in validating last record pOinters, or address in DCBMSHI field outside task or under incorrect protection key
DCBMSHI and DCBSMSI fields specify area too small for vol ume index
DCBMSWA and DCBSMSW fields specify area too small for one track
No prime area specified Invalid buffer specification
Index area too small or crosses volumes End of data set; no address in DCBEODAD field I/O error in writing updated format 2 DSCB
ISAM data set to be processed, but not created or its DCB not closed after creation
03E I OPEN Records to be loaded, but data set previously loaded;
I attempt to add records with resume load to variable length
I I data set
~---+---t_---+---~
I BISAM/ 103D I OPEN I No DSORG=IS or ISU in DD or serial numbers in SER iri DD not I
I QISAM/ I I I in order or not all present I
I BDAM I I I I
L _ _ _ ----L _____ ~ ______________ .1. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ -.1
Completion Code Summary (Part 2 of 10)
r---T---T---T---,
I IComple-1 1 1
1 I tion 10peration or I 1
I Group I Code IMacro Instruction I Explanation 1
~---+---t---+__---~---_f TCAM 040 I OPEN Error in opening a TCAM line group data set.
041 042 043 044 045 046
1 OPEN I 1 1 Processing I I
I OPEN 1 I Processing 1 IMessage Control I Program (MCP) I. ,
Error in opening a TCAM message queues data set.
Error in running a TCAM MCP with the telecommunication on-line test executive.
Error in opening a TCAM application program data set.
Error in processing the FE common write subtask.
I/O error or logical read error.
I CLOSE TCAM MCP is scheduled to be terminated. application program I data set is active. Completion code is for the application
" program data set.
~---+---+_---+---_f Graphics 056 IGraphic attention ANALYZ or GSERV specified DCB. which pointed to DEB, which
access Iservice routine pointed to invalid UCB
method I
. (GAM) 057 IGraphic attention ANALYZ or GSERV specified DCB, which pointed to DEB. which pointed to UCB for other than graphic device
061 062
063
1 service routine I ,CLOSE
I I
IGraphic SUbroutine I Package (GSP) , for IFORTRAN IV, COBOL, land PL/I
I I
CLOSE issued DAR for GACB,that was not specified (via SPAR) by the closing task
Return code equal to or greater than value of null argument produced
2250 operator depressed alphameric keyboard CANCEL key and
I used, light pen to terminate program
~---+---t---+---_f
BTAM 1090 I OPEN UCB for other than communications device I
I I I
1091 I OPEN UCB specified invalid or unsupported transmission control I
1 I uni~ 1
I I 1
1092 I OPEN UCB specified invalid or unsupported terminal control or I
1 1 adapter 1
1 1 1
093 I OPEN UCB specified invalid or unsupported terminal 1
094 095
097 098
1 J
I OPEN
1 I 1 OPEN I 1 I OPEN
1 1
I OPEN I
UCB specified invalid or unsupported optional feature or mode of operation
Line group did not have identical terminal types and/or optional features
DCBBFTEK field specified dynamic buffer allocation, but DCBBUFCB, DCBBUFNO, and DCBBUFL fields not specified Device I/O directory full
1 OPEN Transmission control unit not a 2701 or the Dual
I Communication Interface, or Dual Code Feature not specified
I in UCB
~---+---t__---+__---_f
1 QTAM 10AO 1 OPEN 1 DCBTRMAD field not filled 1
I 1 I I I
I 10Al I OPEN I DCBSOWA field not filled 1
I I 1 1 I
1 IOA2 I OPEN I ddname, in DD or terminal table, not name of process entry 1
1 1 1 1 in terminal table 1
L ______ ~ ______ ~ ___________________ ~ __________________________________________________________ -J
18 M~ssages & Codes (Release 21)
r
I
\.
(
(
)
)
Completion Code Summary (Part 3 of 10)
r---y---T---T---~--___,
1 I . 1 1 I
I I Comple- 1 1 I
1 I tion 10peration or 1 I
1 Group I Code I Macro Instruction 1 Explanation I
~---+---t---+---~---~---~
QTAM OA3 IMessage control All available space ·used in message queues data set (Cont. ) 1 program
OA4 OA-S OA6 OA7
I 1 Checkpoint Idata set I I OPEN I 1
1 OPEN, CLOSE 1
I
Insufficient space allocated when opening data set~ I/O error when setting up format of or closing data set DCB for main storage process or main storage destination queue previously opened
DCB for direct access message queue not opened first or not closed last
1 OPEN DCB for checkpoint data set opened before DCB for direct I access message qllp.ues data set opened, or uncorrectable
I disk error
~---+---t---+---~
1 Job lOBO I 1 I/O error in reading or writing SYS1. SYSJOBQE 1
1 sched- I I 1 I
I uler 11BO I 1 Invalid TTR for SYS1.SYSJOBQE found by system conversion I
1 1 I I routine I
~---+~---t---+---~---~
PROLOGUE 10Cx Program interruption, not in I/O interruption. handler or
1 type 1 SVC routine~ no program routine to handle
1 interruption~ x
=
program interruption code . I 10FlI IOF2 I IOF3 I I
Program interruption in ~/O interruption handler.
Program interruption in type 1 SVC routine
Machine-check interruption~ MCH or SERl able to abnormally terminate job step to continue operating system
IOF5 Program inter~uption occurred while loading transient area
1 I for type 3 or 4 SVC
~---+---t---+__---~---~
IEXCP 1100 II/O operati~n 1 Device not operational I
1 (SVC 00) I I I I
1 I I 1 I'
1 1 200 1 I/O operation 1 Invalid SCB" lOB, DCB protect key I
I I I I I
1 1300 1 I/O operation 1 Invalid DEB protect key 1
1 1 400 I I/O operation 1 "Invalid DCB pOinters I
I I I 1 I
1 1500 II/O operation I Invalid UCB address I
~---+---t---+__---~
1 WAIT 1101 I WAIT I More events .than ECBs 1
I (SVC 01) 1 1 1 I
I 1201 1 WAIT I Invalid ECB address I
1 1 1 I I
1 1301 I WAIT I ECB wait flag already on I
1 I I I I
1 I I I I
~---+---_t---+__---.---~
1 POST 1102 1 POST 1 Invalid ECB address I
I (SVC 02) I 1 I I
I 1202 IPOST I Invalid RB address in ECB I
~---_+---t---+---~~~---~---~
1 Task 1103 IRETURN or branch ~o I ECB already posted or RB address in ECB invalid I
1 termina-I I return address in I
r
1 tion I 1 register 14 I I
1 (SVC 03) 1 1 I I
I IA03 IRETURN or branch to I Subtasks not yet terminated I
I I I return address in I I
I I Iregister 14 1 I
L _________ ..L... ______ ..1-____________________ J. ________________________________________________ --'
COmpletion Code Summary (Part 4 of 10)
r---r---T---T---,
I I Comple-I I I \I I tion IOperation or I I
I Group. I Code IMacro Instruction I Explanation I
~---+---t---+---_i I Task I C03 IRETURN or branch to I TCBDEB points to DEB that is ass'ociated with an invalid DCB I I termina-I Ireturn address in I Warning: Not all data sets closed I
I tion I Iregister 14 I I
I (SVC 03)1 I I I
I (COnt.) 1003 IRETURN or branch to I ENQ resources not yet released I
I I I return address in I I
I I Iregister 14 I I
~---+---t---+---~---_i IGETMAIN 104 IGETMAIN for'program Not enough available storage in local system queue area.
I (SVC 04) lin supervisor mode
I 504 IGETMAIN with LA and Length and address lists overlap
I IA operands
I I
I 604 IGETMAIN Invalid address or length in free area queue element, or
I I inactive program specification; address in A or LA operand
I I is outside task or is not multiple of 4; address of
1 I parameter list erroneous
704 I I GETMAIN List request; MVT not in system
804 I IGETMAIN or language Request for zero bytes of main storage or not enough main I processor storage available
B04 I IGETMAIN Subpool number greater than 127
C04 I IGETMAIN Invalid storage hierarchy specification E04 I I GETMAIN for program Not enough main storage available I lin supervisor mode
~---+---t---t__---~---_i FREEMAIN 305 I FREEMAIN Area to be released not within correct subpool or not I
(SVC 05) I described by DQE I
505 I FREEMAIN with LA Length and address lists overlap I /
land A operands I
I I
605 I FREEMAIN Invalid address or length in free area queue element; I I address in A or LA operand is outside task or is not I I multiple of 4; address of parameter list erroneous I
I I
705 I FREEMAIN List request; MVT not in system I
I I
905 I FREEMAIN Address of area to be released not multiple of 8 I
I I
AOS IFREEMAIN Area to be released overlaps an existing free area I
I I
BOS I FREEMAIN Subpool number greater than 127 I
I I
DOS I FR EEMA IN Attempt to free system queue space storage not owned by I
I task I
~---+---t---+__---~
I FETCH 1106 ILINK, LOAD, ATTACH, I Error while loading module into main storage: scatter data I I (SVC 06) I IXCTL I invalid (MVT), invalid record type (MFT), invalid address I
I I I I (MFT. or MVT), I/O error (MFT or MVT) I
L ________ --L _______ ..I.--___________________ l. ________________________________________________________ ~
20 Messages & Codes (Release 21)
)
)
)
COmpletion Code Summary (Part 5 of 10)
r---T---T---T---,
I I I I I
I I Comple-I I I
I I tion 10peration or I I
I Group I Code IMacro Instruction I Explanation I
~---+---t---+---i FETCH 406 ILINK, ATTACH, XCTL I Module was only loadable; module specified by entry pOint (SVC 06) I I defined by IDENTIFY macro instruction in system with option
(Cont. ) I I 3, but not MVT
I I
506 ILINK, LOAD, ATTACH, I Not enough main storage for module and overlay supervisor IXCTL I or TESTRAN interpreter
I I
606 ILINK, LOAD, ATTACH, I Not enough main storage for module ILINK, LOAD, ATTACH,
I .l'!odule··-mar"k~d·-·~·;;~~
..·-;·;;~~~table)
IXCTL . " - .. -.. - ... -._. __ ._ .... -... _ .. -, 706
806 I ILINK, LOAD, ATTACH, IXCTL
906 I I LINK I I A06 I LINK
B06 I 11/0 activity
I .
I
BLDL detected error:
directory search .'
module not found or I/O error during Tasks waiting for reenterable or serially reusable module exceed 255
Task already waiting for serially reusable module
Abnormally terminating system error task reinstated, and user task abnormally terminated .
C06 IXCTL Abnormally terminat~ng transient area task reinstated, and
I user task abnormally terminated
r---+---t-~---+---~---i IXCTL 1207 IXCTL I Asynchronous exit routine attempted to execute XCTL I
I (SVC 07) I I I I
r---+---t---~---+---~---i I LOAD 1308 I LOAD I Module specified by entry point defined by IpENTIFY macro I
I (SVC 08) I I I instruction I
r---+---t---+---i
GETMAIN., 110A I GETMAIN for program Not enough available storage in local system queue area.FREEMAIN lin supervisor mode
with R I
operand I
(SVC OA) 20A IGetting, freeing, lor replacing region Ifor new job step 30A
40A 60A
80A 90A AOA
I IFREEMAIN I I
I~EEMAIN
I .
IGETMAIN, FREEMAIN I I
I IGETMAIN I I
IGETMAIN, FREEMAIN I I
I GETMAIN, FREEMAIN ---~---~---I
Storage still allocated to previous step; new step
A+ea to be released not within correct subpool or not described by DQE
Attempt to release all of subpool zero
Invalid address or length in free area queue element or inactive program specification; address of area to be released (in register 1) not multiple of 8
~equest for zero bytes of main storage or not enough main storage available
Inactive program address not multiple of 81 address of area to be released not multiple of 8
Inactive program overlaps free area; area to be released overlaps an existing free area
______________________________ ~ ____________________________ _J
COmpletion Code summary (Part 6 of 10)
r---~---T---~---,
I I Comple-l I . I
I I tion I Operati on or I 1
I Group I Code I Macro Instruction I Explanation 1
~---+---f---+---1 IGETMAIN, IBOA IGETMAIN, FREEMAIN I Subpool number greater than'127 I
I FREEMAIN 1 1 1 1
I with R 1 1 1 1
I operand 1 1 1 1
I (SVC OA)I I 1 1
1 (Cont.) 1 1 1 I
1 I 1 1 I
I IDOA IFREEMAIN with R 1 Attempt to free system queue space storage not owned by I
I , 1 operand I task I
~---+~---f---+__---1 1 ABEND 1 DOD IABEND I Invalid ABEND recursion during abnormal termination of 1
I 1 1 I subtask; job step task terminated. 1
I (SVCOD) IEOD IABEND 1 Insufficient main storage available for ABEND processing of ,
I ' I 1 subtask, job step terminated. I
~---+----~-f---+---1 OPEN 013 I OPEN Conflicting or unsupported parameters in DCB; member name
(SVC 13) 1 specified in DD not found; no directory allocation
1 subparameter in DD
113 213 313 413
513 613 713 813 913
1 10PEN, OPEN with 1 TYPE=J
1 I OPEN 1 ,OPEN 1 I OPEN 1 1 1 1 1 OPEN 1 I OPEN
1 1 OPEN 1 I 1 OPEN
1 ISUpplying of I password 1 I
IA13
I
OPEN1 B13 10PEN for UCS printer
1 I
IC13 10PEN, OPEN with 1 1 TYPE=J, OPEN for 1 1 graphics
1 1
I/O error in reading or writing JFCB or in reading JFCB extension block; no exit code provided
DSCB not found; I/O error in reading or writing DSCB I/O error in reading format 3 DSCB
INPUT, INOUT, or RDBACK specified but no serial number in SER in DD; I/O error'in reading volume label; could not mount volume on device; volumes specified less than devices allocated
Attempting to open second DCB for same tape volume I/O error in label processing or tape positioning
Expiration date not occurred, but data set to be opened for output and DD contained MOD in DISP
Verification error in label processing
Operator entered incorrect password twice; third byte of 80-byte record for data set not used to indicate read, wri te, or read and write
File sequence number in LABEL in DD not on volume
Operator canceled UCS ,load or permanent I/O error detected I/O error in reading JFCB or DSCB for concatenated data set; JFCB or DSCB not found for one data set in concatena- tion; graphic DCB already opened by another task
ID13 10PEN for graphics DCB for other than graphics device
1 1 1
IE13 10PEN for graphics DCBGNCP field not 1 through 99 I
~---_+---f---+---1 1 CLOSE 1 214 1 CLOSE 1 I/O error' in tape positioning or volume disposition I
I (SVC 14) 1 1 1 I
I ' I 314 1 CLOSE I I/O error in reading mCB 1
I 1 1 1 I
1 1414 1 CLOSE 1 I/O error in writing updated DSCB 1
I 1 I I I
1 1514 1 CLOSE 1 I/O error in reading JFCB 1
1 1 I 1 1
I 1614 I CLOSE I I/O error in writing file mark I
L ________ L-______ i -____________________ ~ __________________________________________________________ -J
22 Messages & Codes (Release 21)
(
\
(
)
Completion Code Summary (Part 7 of 10)r---T---T---T---~---,
1 1 Comple- 1 1 1
1 1 tion 10peration or 1 1
1 Group 1 Code IMacro Instruction 1 Explanation 1
~---+---t---+---~
1 CLOSE 1714 1 CLOSE 1 I/O error in label processing 1
1 (SVC 14)1 1 1 1
1 (Cont .• ) 1 A14 1 CLOSE 1 I/O error in release of unused direct access space 1
1 1 1 1 1
1 1 B14 1 CLOSE 1 STOW unable to store., modify, or delete data from 1
1 1 1 1 partitioned data set directory because name already in 1
1 1 1 1 directory, no space available in directory, or I/O error in 1
1 1 1 1 searching directory 1
1 1 1 1 1
~---+---t---+__---~
1 1014 ICLOSE for graphics 1 Graphic device previously opened by another task 1
~---+---t---+---~
1 1
TCLOSE 117 IBSAM CLOSE with I/O error in tape positioning or writing file mark (SVC 17) 1 TYPE=T
217 1 IBSAM CLOSE with I/O error in reading JFCB 1 TYPE=T
317 1 IBSAM CLOSE with I/O error in reading DSCB 1 TYPE=T
417 1 IBSAM CLOSE with I/O error in writing updated OSCB 1 TYPE=T
717 1 IBSAM CLOSE with I/O error in la1;lel processing 1 TYPE=T
~---+---t---~---+---~
1 1 1 1 1
1 Master 1122 1 1 Operator canceled job, requested dump 1
1 sched- 1 1 1 1
1 uler 1222 1 1 Operator canceled job, did not request dump 1
1 (SVC 22) 1 1 1 1
/ 1 1322 1 I Execution of job step or cataloged procedure taking longer 1
1 I 1 1 than time specified I
I I 1 I 1
1 1422 1 I Job required too much queue space for initiation 1
~---+---t---+---~
1 1 1 I 1
1 1522 1 1 All tasks in SVC wait state for 30 consecutive minutes or I 1 1 1 1 for time specified in JWT parameter (is systems with SMF) 1
I 1 I 1 1
1 1 722 1 1 OUTLIM keyword on SYSOUT 00 statement exceeded 1
~---+---t---+---~
IWTO/wTOR 1023 IWTO, WTOR 1 Parameter list does not begin on proper boundary 1
1 (SVC 23) 1 I 1 1
1 1 1 1 1
1 1 E23 IREPLY conunand pro- 1 Invalid ECB address or reply address 1
1 1 Icessing (in response 1 1
1 l i t o WTOR) 1 I
~---~-+---t---+---~
1 1 1 1 1
ISEGLO/ 1425 ISEGWT 1 Exclusive segment requested 1
1 SEGWT 1 1 1 I
1 (SVC 25)1 1 1 1
L _________ ~ _______ ~ ____________________ ~ __________________________________________________________ -J
)
Completion Code Summary (Part 8 of 10)
r---T---T---T---,
1 1 Comple- 1 1 1
1 1 tion 10peration or 1 1
1 Group 1 Code IMacro Instruction 1 Explanation 1
~---+---~---+---~---~
1 EXTRACT 1128 1 EXTRACT 1 Output list not on fullword boundary or not contained in 1
1 (SVC 28) 1 1 1 storage assigned to job step 1
1 1 1 1 1
1 1228 1 EXTRACT 1 Input parameter list not on fullword boundary or does not 1
1 1 1 1 begin in storage assigned to job step 1
1 1 1 1 1
1 13 28 1 EXTRACT 1 TCB not for immediate subtask 1
.---+---~---+---~
ATTACH 12A 1 ATTACH Attempt to give subpool being shared with other subtasks
(SVC 2A) 1
22A 1 ATTACH 32A
42A 1 1 ATTACH 1 1 1 ATTACH 1 1 1
subpool number greater than 127
Attempt to give job pack queue, which contains active programs, to new task.
Address for ECB to be posted upon subtask termination is not multiple of 4, higher than highest main storage, or does not have same protection key as macro instruction 62A IATTACH (MFT) Exceeded maximum number of tasks by this ATTACH •
•
---+---~---+---~1 CHAP 112C 1 CHAP 1 Address for subtask TCB does not pOint to valid TCB or TCB 1 1 (SVC 2C) 1 1 1 of immediate subtask, is not multiple of 8, or points to 1
1 1 1 1 valid task that has terminated 1
1 1 1 1 1
1 122C ICHAP 1 Address of TCB of subtask not multiple of 8, higher than 1 1 1 1 1 highest main storage, or does not have the same protection 1
1 1 1 1 key as macro instruction 1
t---+---~---+---~
10verlay 1120 1 1 Words 3 and 4 of segment table invalid 1
1 super- 1 1 1 1
1 visor 1220 1 1 Address in segment table or entry table outside storage for 1
1 (SVC 20) 1 1 1 job step 1
1 1 1 1 1
1 13 20 1 1 Wrong length record or I/O error when loading segment 1
1 1 1 1 1
1 1 C20 1 1 Invalid scatter record. 1
L _________ ~ _______ ~ ____________________ ~ ____________________________________________________________ ~
24 Messages & Codes (Release 21)
(
/
\..
(
)
)
Completion Code summary (Part 9 of 10)
r---T---T---T---,
I I Comple-I I I
I I tion 10peration or I I
I Group I Code IMacro Instruction I Explanation I
~---+---+---+---1 10verlay I D2D I I Invalid record type found when loading segment I
I s,!per- I I I I
I V1sor I I I I
I (SVC 2D)1 I I I
I (Cont.) I I I I
I I I I I
I I E2D I I Invalid address found when loading segment I
~---+---+---+---1 IDEQ 1130 IDEQ without RET=HAVE I DEQ for resource not enqueued by prior ENQ I
I (SVC 30) I I I I
I 1230 IDEQ I Invalid length specified for name representing resource I
I I I I I
I 13 30 IDEQ I Reset-must-complete (RMC) specified in problem program I
I I I I state I
I I I I I
I 1430 IDEQ I Invalid parameter list I
I I I I I
I 15 30 IDEQ I Task does not yet control resource specified I
~---+~---+---+---1 ITEST OPENI131 ITEST OPEN I Control section containing TESTRAN statements modified I
I (SVC 31) I I I before being opened I
I I I I I
I 1331 ITEST OPEN I No program entry point specified I
I I I I I
I 14 31 I I Symbol table and control dictionaries unreadable I
I I I I I
I 1531 I I No DD for data set for unedited TESTRAN data I
~---+---+---+~---1 EOV 137 lEnd of volume I/O error in label processing
(SVC 37) I
237 lEnd of volume I
337 437 537 637
737
837 937
B37 D37
I I
lEnd of data set I I End of volume I I
lEnd of volume for Iconcatenated data set I lEnd of volume
I I
I lEnd of volume or lallocation of Isecondary quantity I lEnd of volume for Isequential data set I lEnd of volume I I
I lEnd of volume I
I loutput operation I
Verification error in label processing; tape label block count not same as DCB block count; interrupt during command chaining
No address in DCBEODAD field
Protection keys different in TCBPKF field of TCB and DEBDEBID field of DEB
Specified device being used for another data set
I/O error in writing tape mark, tape positioning, reading label, sensing for file protection ring; DCB bit does not indicate concatenation of unlike attributes
I/O error; DSCB not found for multi-volume or concatenated data set
I/O error in reading or writing JFCB from or onto direct access
For second or succeeding volume, DSCB for password data set not found or operator entered incorrect password twice; I/O error in reading or writing counter in password data set Volume must be demounted from a device allocated to the data set, but system unable to dismount volume.
More space needed but no secondary quantity specified in SPACE in DD
_________ ~ _______ ~____________________ __ __________________________________________________________ - J
Completion Code summary (Part 10 of 10) /
r---T~~~~le:T---~---T---1 (I,
I I tion 10peration or I I
I Group I Code IMacro Instruction I Explanation 1
~---+---i---+---;
I rov I E37 10utput operation I More space needed but no more volumes specified in SER, 1 1 (SVC 37)1 1 I volume count, or REF in DD; more space needed but 1 I (Cont.) I 1 I unavailable in partitioned data set, additional space would I
I 1 I I require another volume or 17 extents 1
~---+---t---+---;
I 1
ENQ 138 IENQ without RET= Second ENQ without intervening DEQ I
(SVC 38) I TEST, USE, or HAVE I
I J
238 IENQ Invalid length for resource name
338 I IENQ set-must-complete (SMC) specified in problem program state
438 I IENQ Invalid parameter list
DETACH 13E 1 1 DETACH subtask being detached not yet terminated
(SVC 3E) I
23E I DETACH Address of subtask TCB is not multiple of 8, is higher than I highest main storage, does not have same protection key as I macro instruction, or does not point to valid TCB or TCB of
I immediate subtask
33E I I DETACH Subtask being detached not yet terminated
I 1 (STAE=YES was specified)
~---+---i---+---;
I I I I I
I CHKPT 113F I J Error during execution of checkpoint restart I
~---+---i---+---;
I I I I J
I RDJFCB 1140 IRDJFCB I I/O error in reading JFCB I
J (SVC 40) I I 1 I
1 1240 IRDJFCB I No pointer to JFCB in DCB exit list I
~---+~---i---+---; I SWAP 1155 I
/
J SVC 85 (in decimal) issued by user's task, but is 1 ( I (SVC 55) I I I restricted for use by Dynamic Device Reconfiguration. I'~
~---+---i---+---;
J I I I I
I system 12F3 I I Job was being executed when system failure occurred; I
I Restart I I I a system restart was performed J
~---+---i---+_---;
I Rollout/ 12FE I I I/O error in rolling in a job step 1
I Rollin 1 I I I
I 12FF 1 I Abnormal termination at request of User Appendage III 1
~---+---i-~---+---;
1 1 I I I
I supervi- I Fnn I SVC instruction I Invalid operand, nn, in SVc instr'uction I
I sor Calli I I I
I (SVC nn)1 I I J
l _________ ~ _______ i _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ L ____________________________________________________________ -J
26 Messages & Codes (Release 21)
