• Aucun résultat trouvé

Ballistic resistance of multi-layered steel shields

N/A
N/A
Protected

Academic year: 2021

Partager "Ballistic resistance of multi-layered steel shields"

Copied!
166
0
0

Texte intégral

Loading

Figure

Fig. 2.3:  Eight  cylindrical  projectiles  considered  in this  study  (Unit:  mm).
Fig.  2.6:  The finite  element  model  of BRAS  shield impacted  by conical-nose  projectile.
Fig. 2.9:  Various  stress-strain  curves with the  same fracture  strain.
Fig. 2.10:  The same  stress-strain  curves  with various fracture  strains.
+7

Références

Documents relatifs

To get a suitable comparison, experimental values taken before and after the projectile penetrates the target have been considered to be the same as those entering and exiting

3: Experimental distribution of the largest cluster charge normalized to have identical statistics for each excitation en- ergy bin, with the two different data selection techniques

However, the values listed in the table are for the mean sand size (194 µm) and the maximum shear stresses generated by the larger particles in the blend

4 - INTERPRETATION AND DISCUSSION ON THE OBSERVED POLARIZATION PHENOMENON The projectile fragmentation reaction is supposed to be a collision process in which nucleons of

[221, the Li-like configurations are likely to be produced by single elec- tron transfer to projectiles incident in the metastable state ls2s 3S.. The most prominent line due to

Abstract 2014 We consider the transmission and reflection of light by a layered medium where the optical index of.. every layer is a constant which fluctuates from

Nous examinons dans cet article la manière singulère dont Emile Borel, à partir de ses études sur la structure des nombres réels et un certain rejet de la vision

The results, obtained during pressure test in the VeRCoRs mock-up, prove that the scanner can be successfully used in the detection of micro-cracking, of cracks location,