• Aucun résultat trouvé

Characterization and modelling of grit chambers based on particle settling velocity distributions

N/A
N/A
Protected

Academic year: 2021

Partager "Characterization and modelling of grit chambers based on particle settling velocity distributions"

Copied!
213
0
0

Texte intégral

Loading

Figure

Figure 1.13: Schematic of a typical aerated grit chamber (Tchobanoglous et al., 2014)
Figure 3.1: Location of the WRRF at Saint-Nicolas indicated by a red point (source Google Maps).
Figure 3.3: Inlet ow dynamics at Saint-Nicolas WRRF due to pump activations from April 2nd at 8 a.m
Figure 3.13: Modied Van Dorn sampler: (a) Fixed supports and (b) two interns (Alicia Adrovi¢ and Angel Manjarres) placing and controlling the modied Van Dorn.
+7

Références

Documents relatifs

The cycle was modeled to understand expander behavior as a function of the cutoff and recompression volumes. In this model the cylinder and piston are assumed to be

Švec et al. [ 28 ] conducted an in-vivo study on the mechanical resonances of healthy human vocal folds. This phenomenon can only occur if 1) the tissues on the surface of the

Anisotropic failure modes of high-strength aluminium alloy under various stress

Statistical Learning for Image-Based Personalization of Cardiac Models Abstract: This thesis focuses on the calibration of an electromechanical model of the heart from

On the other hand, when restricted to GZ-formulas, it generalizes the reduct definition by Gelfond–Zhang [ 19 ] allowing arbitrary formulas in cond (  X ) , including nested

Professeur, Czech Technical University, Co-Directeur de thèse. M,

that average contributions at group level for a given period within the ostracism treatment either conducted as the first or the last treatment in the session are from the

Les enseignants évoquent une attitude plus calme chez les élèves, une aide pour l’enseignant dans la préparation et la réalisation de la leçon, une aide pour les élèves lors