• Aucun résultat trouvé

Mechanical effects of oxidation induced shrinkage on organic matrix composites

N/A
N/A
Protected

Academic year: 2021

Partager "Mechanical effects of oxidation induced shrinkage on organic matrix composites"

Copied!
24
0
0

Texte intégral

Loading

Figure

Table 1. Properties of T300 carbon fiber [33].
Figure  1:  Evolution  of  the  elastic  modulus  as  a  function  of  the  oxidation  products concentration
Figure  2.  Longitudinal macroscopic  effective  elastic  modulus  of  a  composite  ply, as a function of the oxidation products concentration
Figure  3.  Transverse  macroscopic  effective  elastic  modulus  of  a  composite  ply, as a function of the oxidation products concentration
+4

Références

Documents relatifs

21(a) shows the evolution of the strain energy release rate with the crack length for different aging durations: while for short aging durations the crack propagation across the

Near the excitation threshold of a core level the X-ray yield increases abruptly due to the creation and radiative decay of a core hole (within this paper

A numerical comparative modelling based on finite element method is conducted by using in one hand a several stacking sequences, and in the other hand a growing plies number in order

Introduction: The purpose of this paper is to develop a mechanical model able to predict the mechanical behaviour of a laminate bio-composite material reinforced

Indeed, the predominant chain scission process leads to a catastrophic decrease in the glass transition temperature, but also, at the same time, to a significant

The behaviour of a gas cylinder (target gas cylinder) was tested when its wall is impinged by a jet fire, discharged from the outlet of the open thermal füse of a nearby bottle

bound of the OC petro oxidation flux of the Madeira basin as we assumed that no OC petro is 139. delivered to the Madeira floodplain by its two other

À noter que bien que 3 cas aient donné des exemples actuels ou passés de diversification horizontale (via la mise en place d’une nouvelle production agricole), ces stratégies se