• Aucun résultat trouvé

Structural health of polymer composites: Non-destructive diagnosis using a hybrid NDT approach

N/A
N/A
Protected

Academic year: 2021

Partager "Structural health of polymer composites: Non-destructive diagnosis using a hybrid NDT approach"

Copied!
5
0
0

Texte intégral

Loading

Figure

Figure 1 shows the experimental setup including the five NDT meas- meas-urements  in  situ  and  in  real-time
Fig. 4: Acoustic emission amplitude under the applied tensile stress ramps
Figure 6 shows the evolution of the previously defined damage indica- indica-tors versus applied stresses

Références

Documents relatifs

Our approach is based on three complementary methodologies: (1) data mining for knowledge and pattern extraction for behaviour modelling, (2) ontological modelling of behaviour

This study will allow to identify a anisotropic damage model. Defects are introduced during the meshing using a program that allows duplication of nodes at the interface

The principle of classical HFB-ADC synthesis method is to deter- mine the synthesis filters that approach in a mean square sense the ideal synthesis filters that achieve

In this work we simulate the operation of a symmetrical electrochemical cell where the ions removed in the water flow channel are stored in flowing porous particles located in

In order to improve the qualitative simulation without differential equations in DIVERSITY, we developed a model of execution which constraints the qualita- tive evolution of the

where W semiAmbig is the number of words, for which SP new ∩ SP etalon 6= ∅, SP new is POS-tag set for current ambigious word-form, which was formed as a result of the

Influence of milling time on the remanence field Br and the magnetic saturation Bs The information returned from Br permits to determine the magnetic power of the

The HS approach is used to model restrained composite beam behaviour in fire and is validated against a well referenced full scale test (Cardington Restrained Beam Test)