• Aucun résultat trouvé

Comparison of forming limit diagrams predicted with different localization criteria

N/A
N/A
Protected

Academic year: 2021

Partager "Comparison of forming limit diagrams predicted with different localization criteria"

Copied!
9
0
0

Texte intégral

(1)

Science Arts & Métiers (SAM)

is an open access repository that collects the work of Arts et Métiers Institute of

Technology researchers and makes it freely available over the web where possible.

This is an author-deposited version published in:

https://sam.ensam.eu

Handle ID: .

http://hdl.handle.net/10985/10209

To cite this version :

Guillaume ALTMEYER, Farid ABED-MERAIM, Tudor BALAN - Comparison of forming limit

diagrams predicted with different localization criteria - Steel Research International - Vol. 79, n°1,

p.24-31 - 2008

Any correspondence concerning this service should be sent to the repository

Administrator :

archiveouverte@ensam.eu

(2)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

24

(3)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

25

(4)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

26

(5)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

27

(6)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

28

(7)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

29

(8)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

30

(9)

steel research int. 79 (2008), Special Edition Metal Forming Conference 2008, Volume 1

31

Références

Documents relatifs

Si la cible privilégiée par les promoteurs de la charte de la diversité et du label diversité ainsi que par les signataires de l’ANI était les Français issus de

AKPAMA, Mohamed BEN BETTAIEB, Farid ABED-MERAIM - A comparative study of Forming Limit Diagrams predicted by two different plasticity theories involving vertex effects -

El Ministerio del Ambiente del Ecuador, como una de las autoridades nacionales competentes en bioseguridad, fue creado el 4 de octubre de 1996 mediante Decreto Ejecutivo

The interlocking supports design consists of two wire bent sides that fit together and attach using a metal clip to provide a base for the cone-shaped section of

We report on results on the application of Peak Force - Quantitative Nano Mechanics (PF-QNM) and Kelvin Probe Force Microscopy (KPFM) techniques [3] to the SC/PE

logique de Routley, puisqu’il a pour conséquence que, pour rester identique à lui-même dans tous les mondes possibles, un objet incomplet ou impossible doit conserver partout le

The statistical methods for predicting water main breaks use available historical data on past failures to identify pipe breakage patterns.. These patterns are then assumed to

Since the ice was moving from the northwest, the ice floe properties measured by IPS on the northwest side of the pier represent the ice that hit the pier 2 minutes after the