Mobility of lattice defects: discrete and continuum approaches
Texte intégral
Figure
Documents relatifs
The analysis is carried out for abstract Schrödinger and wave conservative systems with bounded observation (locally distributed).. Mathematics Subject Classification (2000)
QC, as a concurrent multiscale method, is especially suitable for modelling of damage, fracture, and crack propagation in discrete materials, mainly due to the fact that the
[4] Beex LAA, Peerlings RHJ, Geers MGD, 2014, A multiscale quasicontinuum method- ology for lattice models with bond failure and fiber sliding, Computer Methods in Applied Mechanics
Discrete materials such as 3D printed structures, paper, textiles, foams, or concrete, can be successfully modelled by lattice structures, which are especially suited for
Figure 6: The plastic strains in the trusses at the maximum uniform deformation com- puted by the direct lattice computation (left) and the virtual-power-based QC computation
Abstract : Automatic quality control of surface of hot rolled steel using computer vision systems is a real timeapplication, which requires highly efficient Image compression
Furthermore, this comparison enables us to estimate the macroscopic yield stress based on the cohesive contacts between grains, which bridges the gap between continuous and
5.2 A version of the Harthong-Reeb line based on Ω-numbers An instantiation of the minimal axiom system for non-standard arith- metic All properties of our minimal axiom system