• Aucun résultat trouvé

Splitting algorithm for DMT optimal cooperative MAC protocols in wireless mesh networks

N/A
N/A
Protected

Academic year: 2021

Partager "Splitting algorithm for DMT optimal cooperative MAC protocols in wireless mesh networks"

Copied!
10
0
0

Texte intégral

Loading

Figure

Fig. 1. Cooperation scenario with three relay terminals.
Fig. 2. Threshold adjustments of the splitting algorithm at terminal R i
Fig. 4. Threshold adjustments of the splitting algorithm at terminal R i when the feedback is 0 (idle) and a collision has occurred in the past.
Fig. 6. DMT curves of three protocols: the proposed protocol, the direct transmission, and the on-demand cooperation with one relay terminal [6]
+3

Références

Documents relatifs

Our approach combines Arnold’s interpretation of the solution of Euler’s equation for incompressible and inviscid flu- ids as geodesics in the space of

[3] assign channels for multicast mesh networks: the case is less complex than the unicast problem, because a node just receives traffic on a channel and forwards it as a broadcast

In this work, we focus on the distributed joint optimal relay selection and resource allocation in the α-fair NUM and outage probability reduction of a BE enabled network.. We

Ernst, “Impact of delays on a consensus-based primary frequency control scheme for AC systems connected by a multi-terminal HVDC grid,” in Proceedings of the 2010 IREP Symposium -

We have pro- posed a new data aggregation scheme based on a dynamic waiting time, which uses judicious decision making policies at the aggregator nodes level in order to determine

Energy Conservation for Wireless Mesh Networks: A PSO Approach with Throughput-Energy Consumption Scheme Using Solar Energy.. 10th Interna- tional Conference on Intelligent

In this paper, we have also proposed design of a point based credit scheme in a fairly dense sensor network that encourages nodes to cooperate in packet forwarding

In a wireless sensor network (WSN), in order to provide a secure communication environment for all the sensor nodes, we often securely authenticate network