Observer-based Tracking Control for Single Machine Infinite Bus System Via Flatness Theory
Texte intégral
Figure
Documents relatifs
Nonlinear Observer-based Tracking Control of Link Stress and Elevation for a Tethered Aerial Robot using Inertial-only Measurements.. Marco Tognon 1,2 and Antonio
Inspired by the techniques involved in [Frye et al.(2010)], this work proposes an output-feedback control scheme for the global stabilization of the PVTOL aircraft, taking into
The proposed dynamic output feedback approach is based on an interval state observer design for a given class of nonlinear uncertain systems.. An interval observer was used for
In this section, based on the proposed observer, an indepen- dently designed PD-like controller is introduced to achieve 6-DOF relative tracking objectives, and then the
In order to compare the minimax (linear) approach to observer design with nonlinear observation scheme based on high order sliding mode principles, the fixed-time
In the case where the unmeasured subspace is stable, we employ a standard impulsive observer coupled with a continuous linear feedback control.. Next, when the unmeasured subspace
Based on the above works, a boundary observer for a class of coupled parabolic PDEs processing different dif- fusions was designed in [ 74 ] by using the backstepping method,
Taking advantage of results on the optimality of the BFN method, we show that for systems with skew-adjoint generators, the initial state and parameter estimate minimizing an