Pixel characterization for the MFT upgrade of the ALICE experiment

By contrast, in the proposed method, the use of calibration enables us to take into account in a consistent manner the information of score absence into the fusion process, as when

performed between the sensors and the beam telescope is done using the particle impact position measured by the strip sensors, the high level of noise resulted in the incorrect

Picture of one of the original FPIX service half-cylinders with two modules of the Phase-1 pixel detector pilot system installed on the added third half-disk mechanics (left) and

Figure 18: The leakage current between two adjacent pixels in a highly irradiated singlechip device with p-stop isolation, as a function of the potential di erence between them..

This circuit has been design in such a way that it can be easy to test and measure the signals. Three probes have been added into each analogue channels after

[r]

[r]

[r]